Home
>
Panasonic
>
Video Recorder
>
Panasonic Digital Hd Video Cassette Recorder Ajhd1500p Operating Instructions
Panasonic Digital Hd Video Cassette Recorder Ajhd1500p Operating Instructions
Have a look at the manual Panasonic Digital Hd Video Cassette Recorder Ajhd1500p Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
– 116 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...](http://img.usermanuals.tech/thumb/58/68219/w64_ajhd1500p_en_om_d-115.png "Page 116
– 116 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...")
![Page 117
– 117 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This...](http://img.usermanuals.tech/thumb/58/68219/w64_ajhd1500p_en_om_d-116.png "Page 117
– 117 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This...")
![Page 118
– 118 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×2.0 (×1.85 with any format except the DVCPROHD-LP format)
×4.9
×9.8
×16
×32: This speed differs according to the setting selected for
setup menu No. 101...](http://img.usermanuals.tech/thumb/58/68219/w64_ajhd1500p_en_om_d-117.png "Page 118
– 118 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×2.0 (×1.85 with any format except the DVCPROHD-LP format)
×4.9
×9.8
×16
×32: This speed differs according to the setting selected for
setup menu No. 101...")
![Page 119
– 119 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...](http://img.usermanuals.tech/thumb/58/68219/w64_ajhd1500p_en_om_d-118.png "Page 119
– 119 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...")
– 121 – Connector signals VIDEO IN HD SERIAL IN (DIGITAL) BNC×1 Active-through (BNC×1) HD REF IN BNC×2Loop-through, 75Ω termination switch provided SD REF IN BNC×2Loop-through, 75Ω termination switch provided SD SERIAL IN (DIGITAL) BNC×1Active-through (BNC×1)(Board, option) SDTI IN BNC×1 (Board, option) VIDEO OUT HD SERIAL OUT (DIGITAL) BNC×4 SD SERIAL OUT (DIGITAL) BNC×2 VIDEO OUT BNC×3 HD REF OUT BNC×1 SD REF OUT BNC×1 SDTI OUT BNC×1 (Board, option) AUDIO IN HD SERIAL IN (DIGITAL) BNC×1 Active-through (BNC×1) AUDIO IN (DIGITAL) BNC×4 CH1/CH2,CH3/CH4,CH5/CH6, CH7/CH8 AES/EBU format AUDIO IN (ANALOG) XLR×4 CH1, CH2, CH3, CH4 CUE IN XLR×1 TIME CODE IN XLR×1 SD SERIAL IN (DIGITAL) BNC×1Active-through (BNC× 1)(Board, option) AUDIO OUT HD SERIAL OUT (DIGITAL) BNC×4 AUDIO OUT (DIGITAL) BNC×4 CH1/CH2,CH3/CH4,CH5/CH6, CH7/CH8 AES/EBU format AUDIO OUT (ANALOG) XLR×4 CH1, CH2, CH3, CH4 SD SERIAL OUT (DIGITAL) BNC×2 CUE OUT XLR×1 TIME CODE OUT XLR×1 MONITOR OUT XLR×2 L/R HEADPHONES (front) 1/4˝ Phone jack Pin No. Signal 1 2 3GND HOT COLD
– 122 – Connector signals RS-422A REMOTE (9P) REMOTE IN/OUT Pin No.SignalPin No.SignalPin No.Signal 1 FRAME GROUND 4RECEIVE COMMON7 TRANSMIT B 2 TRANSMIT A 5—————8 RECEIVE A 3 RECEIVE B 6TRANSMIT COMMON9 FRAME GROUND REMOTE OUT Pin No.SignalPin No.SignalPin No.Signal 1 FRAME GROUND 4TRANSMIT COMMON7 RECEIVE B 2 RECEIVE A 5—————8 TRANSMIT A 3 TRANSMIT B 6RECEIVE COMMON9 FRAME GROUND PARALLEL REMOTE (50P) Refer to the connector signals in setup menu No. 01 (PARA IN) and No. 02 (PARA OUT). (See pages 65 to 67) RS-232C REMOTE (25-pin D-SUB crossover cable supported) Pin No. Abbreviation Circuit Description 1 FRAME GROUND Protective ground Frame ground 2 RxD Received data Sends data to the PC. 3 TxD Transmitted data Receives data from the PC. 4 CTS Clear to send Shorted with pin 5. 5 RTS Request to send Shorted with pin 4. 6 DTR Data terminal ready No processing 7 GND Signal ground Signal ground 20 DSR Data set readyPositive power output after communication enable status ENCODER REMOTE (15P) Pin No.Signal 1 FRAME GROUND 4 REM (G) 7 REM RX (X) REMOTE CONTROL PROTOCOL RECEIVE 8 REM TX (X) REMOTE CONTROL PROTOCOL TRANSMIT 14 REM RX (Y) REMOTE CONTROL PROTOCOL RECEIVE 15 REM TX (Y) REMOTE CONTROL PROTOCOL TRANSMIT
– 123 – Printed circuit board Printed circuit board F1 board ADDASW1 Audio Input Impedance SW SW101HIGH This sets the CH1 audio input impedance. HIGH/600Ω HIGH SW101 Cue Input Impedance SWHIGH Abbr. nameFull name FunctionFactory setting H3 board CUEAudio Input Impedance SWThis sets the CH2 audio input impedance. HIGH/600Ω SW 201 HIGH Audio Input Impedance SWThis sets the CH3 audio input impedance. HIGH/600Ω SW 301 HIGH Audio Input Impedance SWThis sets the CH4 audio input impedance. HIGH/600Ω This sets the CUE input impedance. CAUTION: These servicing instructions are for use by qualified service person- nel only. To reduce the risk of electric shock do not perform any ser- vicing other than that contained in the operating instructions unless you are qualified to do so.
– 124 – Specifications GENERAL Power supply:AC 120 V, 50 – 60 Hz Power consumption:230 W Operating ambient temperature: 41°F to 104°F (5°C to 40°C) Operating ambient humidity: 10% to 80% (no condensation) Weight: 44 lbs (20 kg) Dimensions (W × H × D): 16-3/4 (max. 17-3/16 ) × 6-15/16 × 17-11/16 inches (Not including the support legs, connectors, JOG dial and fan) Recording format: DVCPROHD-LP Recording video signal: 1080i/59.94 Hz, 720p/59.94 Hz selectable Recording audio signal: 48 kHz, 16 bits, 8 channels Recording tracks: Digital video/audio: helical track The time code is recorded in the sub-code area. Cue track: 1 track Control track: 1 track Tape speed: 67.64 mm/sec Tape: Metal tape Recording time: 92 minutes (using the L cassette) FF/REW time: Approx. 1 min (with the L cassette) Search speed: ±100× speed (color) Digital slow:–1× to +2 × speed (when playing back DVCPRO-LP recorded tapes) –1× to +1.1 × speed (when playing back tapes other than DVCPRO-LP recorded) Editing accuracy: ±0 frames (using the time code) Tape timer accuracy: ±1 frame (using the continuous CTL signal) Servo lock time: Less than 0.3 sec (standby ON) Loading time: Approx. 3 sec Audio split editing: YES VIDEO Sampling frequencies: Y: 74.25 MHz, PB/PR: 37.125 MHz Quantizing: 8 bits Video compression method: DCT + variable length code Video compression rate: 1/6.7 Error correction: Reed-Solomon product code Video recording bit rate: 100 Mbps Video input connector HD serial digital input: BNC×1, complies with SMPTE 292M standard, BNC×1 (active-through)* SD serial digital input (option): BNC×1, complies with SMPTE 259M-C standard, BNC×1 (active-through)* SDTI input (option): BNC×1, complies with SMPTE 305M/321M standard* HD reference input: BNC×2 (loop-through), 75Ω on/off selectable SD reference input: BNC×2 (loop-through), 75Ω on/off selectable Video Output Connector HD serial digital output: BNC×3, complies with SMPTE 292M standard, BNC×1 (monitor output with superimpose) SD serial digital output: BNC×1, complies with SMPTE 259M-C/294M standard, BNC×1 (monitor output with superimpose) SDTI output (option): BNC×1, complies with SMPTE 305M/321M standard* HD reference output: BNC×1 SD reference output: BNC×1 Analog composite output: BNC×3, video 1, video 2 (WFM OUT), video 3 (superimpose on/off) Output during SD playback or during the down-conversion * The AJ-UC1500 SD serial digital input up-converter board and the AJ-YAC150P SDTI interface board, both available as optional accessories, cannot be installed at the same time. Install one or the other.
– 125 – Video Signal Adjustment HD SDI Y output gain:–¶ to +3 dB HD SDI P B output gain:–¶ to +3 dB HD SDI P R output gain:–¶ to +3 dB HD SDI Y black level: ±10% HD SDI output system phase: ±5.5H (n12100 samples, 13.5 ns steps) SD SDI Y output gain/ Composite Y output gain:–¶ to +3 dB SD SDI P B output gain/ Composite P B output gain:–¶ to +3 dB SD SDI P R output gain/ Composite P R output gain:–¶ to +3 dB SD SDI Y black level/ Composite output setup: ±10% SD SDI output system phase: ±5.5H (n9438 samples, 37ns steps for 480i outputs and 54ns steps for 480p outputs) Composite video output system phase: ±5.5H (n9438 samples, 37ns steps) Composite video output SC phase: ±180° AUDIO Digital Audio Sampling frequencies: 48 kHz (synchronous with video) Quantizing: 16 bits Frequency response: 20 Hz to 20 kHz ± 1.0 dB (at the reference level) Dynamic range: Better than 90 dB (1 kHz, emphasis OFF) Distortion: Less than 0.05% (1 kHz, emphasis OFF, reference level) Crosstalk: Less than –80 dB (1 kHz, between 2 channels) Wow & flutter: Below measurable limit Headroom: 20 dB Cue Track Frequency response: 300 Hz to 6 kHz ± 3 dB Audio Input Connector Analog input (CH1 to CH4): XLR×4, 600Ω/high impedance selectable, +4/0/–20 dBu selectable Digital input (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8): BNC×4, AES/EBU format HD serial digital input: BNC×1, complies with SMPTE 292M/299M standard, BNC×1 (active-through) SD serial digital input: BNC×1, complies with SMPTE 259M-C/272M-A standard, BNC×1 (active-through) Cue track input: XLR×1, 600Ω/high impedance selectable, +4/0/–20/–60 dBu selectable Audio Output Connector Analog output (CH1 to CH4): XLR×4, low impedance, +4/0/–20 dBu selectable Digital output (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8): BNC×4, AES/EBU format HD serial digital output: BNC×4, complies with SMPTE 292M/299M standard SD serial digital output: BNC×4, complies with SMPTE 259M-C/272M-A standard Cue track output: XLR×1, low impedance, +4/0/–20 dBu selectable Monitor output: XLR×2, low impedance, +4/0/–20 dBu selectable Headphones: 1/4˝ phone jack, variable level, 8Ω Other Input/Output Connectors Time code input: XLR×1, 0.5 to 8 Vp-p, 10 kΩ Time code output: XLR×1, low impedance, 2.0 Vp-p±0.5Vp-p RS-422A input: D-sub 9-pin, RS-422A interface RS-422A output: D-sub 9-pin, RS-422A interface RS-232C: D-sub 25-pin, RS-232C interface Parallel input/output: D-sub 50-pin Encoder remote: D-sub 15-pin Weight and dimensions shown are approximate. Specifications are subject to change without notice. . Specifications
Printed in Japan VQT9920F0602H@P PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 Broadcast PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300