Panasonic Digital Hd Video Cassette Recorder Ajhd1400 Operating Instructions

41
Setup menus (continued)
OPERATION (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
115*1
EJECT SW 
INH
For setting whether to restrict the operation of the 
EJECT button on the front panel.
0000REC:Operation is inhibited while the unit is in the 
recording mode.
0001 OFF :The EJECT button can be operated in all operation...

42
Setup menus (continued)
OPERATION (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*2 In the initial settings, the Recording Mark is not
overlapped on the HD SDI signals.
“_____” indicates the factory setting.
No./Item Description of setting
155*1
AU TO  R E C
For setting whether the recording/stop is executed 
automatically in conjunction with the Recording Mark 
of the HD SDI input signals from...

43
Setup menus (continued)
OPERATION (continued)
*1 Even if the RESET button is pressed while pressing the
SEARCH button, the value may not return to the factory
setting.
*2 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
INTERFACE
“_____” indicates the factory setting.
No./Item Description of setting
181*1
TYPE-A 
NEAR
For setting (in increments of 0.1 V) the voltage level at 
which the counter flashes as warning...

44
Setup menus (continued)
EDIT
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
302*1
CONFI EDIT
For selecting whether to perform simultaneous 
playback during editing.
0000OFF:Simultaneous playback is not performed.0001 ON :Simultaneous playback is performed.
303*1
AUD EDIT IN
For selecting how to connect the digital audio edit IN 
points....

45
Setup menus (continued)
TAPE PROTECT
“_____” indicates the factory setting.
TIME CODE
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*2 Even if the RESET button is pressed while pressing the
SEARCH button, the value may not return to the factory
setting.
No./Item Description of setting
400
STILL TIMERFor setting the time to be taken before the unit is set 
in the tape protection mode when it is left...

46
Setup menus (continued)
TIME CODE (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*A The SBC (Sub Code Data) area is an area that exists
separately from the video and audio area on the helical
track and contains the tape management information,
such as the time code, in compliance with the SMPTE/
EBU and the recording time. As with the ordinary LTC
(Linear Time Code), the time code can be read...

47
Setup menus (continued)
VIDEO
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
601*1
VIDEO INT 
SG
For selecting the type of internal standard signals.0000100%CB:A 100% color bar signal is selected.0001 75%CB :A 75% color bar signal is selected.0002 SMPTE :An SMPTE color bar signal is selected.0003 ARIB :An ARIB color bar signal is...

48
Setup menus (continued)
VIDEO (continued)
“_____” indicates the factory setting.*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*UP: With HD output (HD tape playback or up-converted
output)
*DW: With SD output (SD tape playback or down-converted
output)
No./Item Description of setting
651*1
HUE STYLE 
(SD)*DW
For setting the axis of revolution for the chroma phase 
adjustment of the SD SDI output and analog...

49
Setup menus (continued)
VIDEO (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*UP: With HD output (HD tape playback or up-converted
output)
*DW: With SD output (SD tape playback or down-converted
output)
“_____” indicates the factory setting.
No./Item Description of setting
665
SETUP LVL
(AJ-HD1400P)
BK LVL
(AJ-HD1400E)
For adjusting the setup ( or black) level of the HD SDI, 
analog component...

50
Setup menus (continued)
VIDEO (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*DW: With SD output (SD tape playback or down-converted
output)
“_____” indicates the factory setting.
No./Item Description of setting
692*1
UMID POS
This sets the line on which the UMID information is to 
be superimposed.
0000 BLANK
0001 12L
    :                        :
0006
17L    :                        :
0008...