Panasonic Digital Hd Video Cassette Player Recorder Ajhd1200a Operating Instructions

41
500 VITC BLANK
0000
0001
BLANK
THRU
For setting whether to output the VITC signal at the position which is set using
menu items No.501 [VITC POS-1] and No.502 [VITC POS-2].
0: The VITC signal is not output.
1: The VITC signal is output.

This setting takes effect only with the SD output (VIDEO output and SD SDI
output).
501 VITC POS-1 0000
:
0006
:
001010L
:
16L:
20LFor setting the position where the VITC signal is to be inserted.

OThe same line as the one selected by menu item No.502 [VITC POS-2]...

42
Setup menus
512 TC OUT REF
0000
0001VOUTTC_INFor setting the signal to be used as the reference for aligning the phase of the time
code which is output from the TC OUT connector with the phase of the external TC
input signal when a setting other than INT is selected as the menu item No.507 [TC
SOURCE] setting.  (In EE mode only)
0: The output video signal is used as the reference.
1: The external time code input signal is used as the reference.
530 TC PRESET For setting the time code of the internal...

43
Setup menus
603 V-MUTE SEL
0000
0001
0002
0003N MUTE
GRAYBLACK
NOISEFor setting whether to mute the video output signal when a blank part of the tape is
detected during playback.
0: The video output signal is not muted.  (It is frozen.)
1: The video output signal is muted and turned gray.
2: The video output signal is muted and turned black.
3: The video output signal is muted and turned into noise.
600 VIDEO IN SEL
0000
0001
0002INTSG
HDSDI1394For selecting the video signals to be input.
0: The...

44
Setup menus
VIDEO
Item Setting
No.Superimposed
displayNo.Superimposed
displayDescription of settings
“” indicates the factory setting.
630
1080i>HD_OUT
0000
00011080i720pFor selecting the HD output signal format during 1080i tape playback or in the
1080i EE mode.
0: 1080i
1: 720p

OThis item’s setting cannot be changed while a tape is being recorded or while
the recording pause mode is established.
OWhen 720p is selected as this item’s setting, no signals are output from the DV
connector.  If “1394”...

45
Setup menus
“” indicates the factory setting.
VIDEO
Item Setting
No.Superimposed
displayNo.Superimposed
displayDescription of settings
687 SDI INDEX 02DW
00000001OFFONFor selecting whether to superimpose the VIDEO INDEX signal onto the SD SDI
output.
0: The VIDEO INDEX signal is not superimposed onto the SD SDI output.
1: The VIDEO INDEX signal is superimposed onto the SD SDI output.

2DW:With SD output (SD tape playback or down-converted output) 684 EDH (SD)
2DW0000
0001OFF
ONFor setting whether to...

46
Setup menus
700 AUDIO IN SEL
0000
0001
0002INTSG
ANA
SDIFor setting the audio signal input (in all the channels simultaneously).
0: The internal signal is generated.
1: The input is fixed to analog signals.
2: The input is fixed to SDI signals.

OThe input signals of the channels when analog signals are supplied are
recorded onto the audio tracks below on the tape.
CH1 input5CH1 and CH5 track
CH2 input5CH2 and CH6 track
CH3 input5CH3 and CH7 track
CH4 input5CH4 and CH8 track
OWhen “1394” is selected...

47
Setup menus
731 PB FADE
0000
0001
0002AUTOCUT
FADEFor setting the processing for the audio edit points (IN point, OUT point) and follow-
on recording point during playback.
0: The processing follows the status established during recording.
1: Cut processing is forcibly performed.
2: Fade processing is forcibly performed.
732 EMBEDDED AUD
0000
0001
OFF
ON
For setting whether to superimpose audio data onto the HD SDI output and SD SDI
output.
0: The audio data is not superimposed.
1: The audio data is...

48
770 MONITOR MIX
0000
0001STEREOCH1+2For setting the audio monitor output sound.
(This functions when the audio monitor selector switch on the front panel is at the
ST position.)
0: The sound is output in stereo.
1: Mixed sound is output (to both the left and right connectors).
771 H.PHONE MIX
0000
0001STEREOCH1+2For setting the headphone output sound.
(This functions when the audio monitor selector switch on the front panel is at the
ST position.)
0: The sound is output in stereo.
1: Mixed sound is...

49
DIF (This menu appears only when the AJ-YAD120AG board is installed.)
“
” indicates the factory setting.
880 DIF SPEED
0000
0001
0002S100
S200
S400For setting the transfer speed of the digital video interface output.
0: 100 Mbps
1: 200 Mbps
2: 400 Mbps
When S100 has been selected as this item’s setting, DVCPRO
HD format signals cannot be input or output.
882 DIF IN CH 0000
:
0063
00640
:
63
AUTOFor setting the input channel.
0 to 63: The input channel is fixed at the channel corresponding to the...

50
Error messages
When something goes wrong with the unit, one of the
following error messages will appear on the front
panel’s counter display and on the monitor’s
superimposed display.
With a superimposed display, the error number will
appear in the counter value display area.If T&S&M is selected as the menu item No.006
[DISPLAY SEL] setting, the error messages will
appear in the mode display area of the superimposed
display.
Error No. Error message and descriptionError No. Error message and...