Panasonic Digital Hd Plasma Tv Th 65xvs30 Operating Instructions

							21
SAP
•Digital channel
Select the audio track (if available).
•Analog channel
Cycle through different audio modes.
e.g.
Stereo SAP Mono
LIGHT
Light the remote control buttons. The selected button blinks when lit.
A -ANTENNA - B
Switch to (A or B) RF antenna input.
Audio Track 1 of 1 (English)
Location of Controls
A: 15-1
KPBS - HD
Add FAVTV-G 1080i
VIVID HDMI12:30 pm
30
CC
SAP
Antenna designation,
Channel and program #
and Station identifier Rating ClockProgram Aspect
Picture mode settingPIP/SPLIT CH 
number or
Input information
Closed Caption
SAP indicationTime remaining
in Sleep Timer
Press OK button to add or delete the channel 
in the Favorite channel list (see page 30).
BBE
Turn BBE VIVA 3D OFF or ON (see page 29).
RECALL
Display or remove the channel banner.
ASPECT
Change the screen aspect (see page 56). MUTE
Mute the sound. Press again to cancel the mute.
EXIT
Exit menus.
CH
VOL
CHVOL
OK
MENU EXIT
 
CH: Change to the next channel up.
 
: Move cursor upward during menu mode.
 
VOL : Reduces volume.
 
: Move cursor to the left during
menu mode.Choose menu and submenu entry.
VOL : Increase volume.
  
: Move cursor to the right during
menu mode.
 
CH: Change to the next channel down.
 
: Move cursor downward during menu mode.
MENU
Display Main Menu or return
one step backward in menus
(see pages 24, 57).
Direct program number selection buttons
PROG 
-: When tuning digital channel, press the button to enter the minor number in a compound
channel number.
• To enter the channel number
  e.g. CH 15-1: [1]       [5]       [-]       [1]       [OK] 
						

							22
Language
First Time Setup
For your convenience, First Time Setup menu will be displayed on screen when the
set is turned on for the first time. If needed, follow the menus and procedures displayed
on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 36-38).
TVVCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
AUX
ASPECT
MUTERECALL
BBE
CH
VOL
CHVOL
OK
MENU EXIT
POWER
Select the configuration of RF input depending on the
signal source.
Press to select Input Setup.
Press to select Cable only,
Cable/Antenna or Antenna
only.
Press to enter your selection.
This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital
channels.
Notes:
• If the EXIT button is pressed at anytime during Auto Scan,
Auto Scan will be cancelled and the TV will return to the
First Time Setup menu.
• If a CableCARD
TM is present during the First Time Setup
and Antenna (A) is set to cable, Antenna (A) will not be
scanned due to the CableCARD
TM providing the channel
map.
First Time Setup
Input Setup
Cable/Antenna
Auto ScanSetting
Language1
2
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Press to select the sub-menu.
Press to start Auto Scan.
After Auto Scan is completed,
the TV tunes to the first channel
found during Auto Scan.
CH
VOL
CHVOL
OK
First Time Setup
Input Setup Scan All
Antenna (A) Analog
Antenna (A) Analog & Digital
Antenna (B) Analog
Antenna (B) Analog & Digital
Auto Scan
Language
CH
VOL
CHVOL
OK
1Press to select Auto Scan.
Press to enter the sub-menu
field.
2
To return to the previous menu
Press  MENU
To exit the menu screen
Press   EXIT
Press to start the Auto Scan.
All available channels with a signal will be
programmed into memory.
1
CH
VOL
CHVOL
OK
Allows you to select the language used for On Screen
Displays.
Press to select Language.
Press to enter the sub-menu
field.
CH
VOL
CHVOL
OK
2
Press to select the Language.
Press to enter your selection.
English SpanishFrench
First Time Setup
Input Setup
English
Auto ScanSetting
Language
Input Setup
Auto Scan 
						

							23
Watching TV programs
MENU
R-TUNE
PIP MIN
REWPIP MAX
FF
PLAY
EXIT
VCRDVD
DBSRCVR
LIGHT
SAP
AUX
ASPECT
MUTERECALL
BBE
STOPPAUSE
FREEZE
TV/VCR
PIP SPLIT MOVE
SWAP
SEARCHOPEN/CLOSESPLIT CH
DVD/VCR CH
REC
CH
VOL
CHVOL
OK
TV/VIDEO
TV
CBL
A -ANTENNA - B
POWER
123
456
789
PROG
0
1Press to operate the TV set with the remote control.
2Press to turn the TV on.
3Press ANTENNA (A) or (B) button for desired TV
signals. (see pages 12, 13, 14)
4Press to select desired channel.
5Select the desired volume level.
POWER
Note:
The channel number and volume level remain the same even after the TV is
turned off.
TV
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Note:
If you enjoy terrestrial TV programs only, you dont need to insert the  CableCARDTM. To enjoy cable TV programs, first insert the CableCARD
TM (with
its front side facing down) into CableCARDTM slot on the back
of the Receiver. (see page 18)CableCARDTM
A -ANTENNA - B
•You can also use the direct program number selection
buttons and PROG–button (see page 21). 
						

							24
Menu Navigation
1Press to display the Main menu.
2
Press to select
Other Adjust.
Press to display
the sub-menu.
CH
VOL
CHVOL
OK
(To select Other Adjust sub-menu)
MENU
CH
VOL
CHVOL
OK
Press to select the menu.
Timer
(see page 33)
Setup
(see page 36)
Lock
(see page 42)
3Picture
Color
Tint
Brightness
Picture
Sharpness
Normal
Other Adjust 
Pic Mode
Vivid
31
31
26
63
50
No
ex. Picture menu
CH
VOL
CHVOL
OK
Press to select the
sub-menu.
Press to select or
activate the sub-
menu.
About
The About screen displays assorted information
about the TV. Please have this information when
calling Customer Care Center.
Other Adjust
Color Mng.
Video NR
3D Y/C Filter
Color Matrix
Freeze
Color Temp
Cool
SplitOn
Off
Off
HD
TV
R-TUNE
PIP MIN
REWPIP MAX
FF
PLAYPROG
VCRDVD
DBSRCVRCBL
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
456
78
0
9
AUX
ASPECT
MUTERECALL
BBE
STOPPAUSE
FREEZE
TV/VCR
PIP SPLIT MOVE
SWAP
SEARCHOPEN/CLOSESPLIT CH
DVD/VCR CH
REC
CH
VOL
CHVOL
OK
MENUEXIT
POWER
Picture
(see page 26)
Audio
(see page 28)
Channel
(see page 30)
Photo Viewer(see page 46)
ex. Picture menu
Press to enter the sub-menu field.
CH
VOL
CHVOL
OK
Press to select the
sub-menu.
Press to adjust the
sub-menu.
[Picture / Audio / Timer]
1
2 
						

							25
Press to return.
To return to the previous screen
Press to return to normal picture.
To exit menu
MENU
EXIT
Menu Navigation
[Channel / Setup]
CH
VOL
CHVOL
OK
Press to select the menu.
Press to enter the sub-
menu field.
Proceed to adjustment
and setting.
Password
Enter Password- - - - 
[Lock]
Enter password and repeat step 2.
Proceed to adjustment and setting. 
						

							26
CH
VOL
CHVOL
OK
Press to select Pic Mode.
Press to select the picture mode.
• Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
• Standard : Recommended for normal viewing conditions with subdued room lighting.
• Cinema : For watching movies in a darkened room. It provides a soft, film-like picture.
• Auto: Automatically senses the ambient light conditions and adjusts the brightness
and gradation accordingly, to optimize contrast.
CH
VOL
CHVOL
OK
Press to select the sub-menu.
Press to adjust the sub-menu. Lets you choose the pre-set picture modes that best suits the program you are viewing. This feature also affects Color
Temp setting (see page 27).
Note:
Each mode has its own picture settings (Color, Tint, Brightness, Picture and Sharpness).
1Press to select Other Adjust.
Press to display the sub-menu.
CH
VOL
CHVOL
OK
2Press to select the sub-menu.
Press to select or activate the sub-menu.
Other Adjust
Color Mng.
Video NR
3D Y/C Filter
Color Matrix
Freeze
Color Temp
Cool
SplitOn
Off
Off
HD
Menu Navigation
Picture
Picture
ColorTintBrightness
PictureSharpness
Normal
Other Adjust 
Pic Mode
Vivid
31
31
26
63
50
No
CH
VOL
CHVOL
OK
Pic Mode
Color / Tint / Brightness / Picture / Sharpness / Normal
Other Adjust
Item
Explanations
Color
Tint
Brightness
Picture
Sharpness
NormalAdjusts desired color intensity.
Adjusts natural flesh tones.
Adjusts dark areas of picture.
Adjusts white areas of picture.
Adjusts clarity of outline detail.
Resets all picture adjustments to factory default settings. Press the MENU key to activate the main menu and select Picture. (refer to page 24) 
						

							27
CH
VOL
CHVOL
OK
Press to select Color Matrix.
Press to select SD or HD.
• SD : When the input signal is a normal TV system (NTSC).
• HD : When the input signal is a High-Definition system (ATSC).
Notes:
• This feature is available only with 480p signal and not available with regular TV (NTSC) program.
• When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture quality.
CH
VOL
CHVOL
OK
Press to select the sub-menu.
Press to adjust or activate the sub-menu.
Menu Navigation
CH
VOL
CHVOL
OK
Press to select Freeze.
Press to select Split or PIP.
Item
Explanations
Color Temp
(Temperature)
Color Mng.
(Color Management)
Video NR
3D Y/C Filter
 Color Temp (temperature) / Color Mng. / Video NR / 3D Y/C Filter
 Color Matrix
Displays 480p input signals in a natural color from digital equipment adapters connected to COMPONENT VIDEO
INPUT (Y, P
B, PR) terminals.
Select HD or SD to automatically adjust color parameters for HD (high definition) or SD (standard definition).
 Freeze
This feature is used to freeze main picture and display it in a PIP or SPLIT frame, when the FREEZE button on the
remote control is pressed. Press FREEZE again to delete frame (see pages 53, 55).Select Normal, Warm (red) or Cool (blue) colors to suit personal
preferences.
Color Mng. On
Enable vivid color adjustment automatically.
Reduces noise in the channel, commonly called snow. Remains
off when receiving a strong signal.
Minimizes noise and cross color in the picture. 
						

							28
CH
VOL
CHVOL
OK
Press to select AI Sound.
Press to select On or Off.
Audio
CH
VOL
CHVOL
OK
Press to select the sub-menu.
Press to adjust or activate the sub-menu.
1
CH
VOL
CHVOL
OK
Press to select Other Adjust.
Press to display the sub-menu.
2
Press to select the sub-menu.
Press to select or activate the sub-menu.
Item
Explanations
Bass
Treble
Balance
NormalIncrease or decrease the bass response.
Increase or decrease the treble response.
Emphasize the left / right speaker volume.
Reset Bass, Treble and Balance adjustments to
factory default settings.
Menu Navigation
Audio
Treble
Balance
Normal
Other Adjust Bass
7
7
31
Set
CH
VOL
CHVOL
OK
 AI Sound
Equalize overall volume levels across all channels. AI sound is not available in VIDEO input mode (see page 20).
Effective only during internal TV tuner operation.
Bass / Treble / Balance / Normal
Other Adjust
Other Adjust
BBE VlVA 3D 
Surround
Speakers
HDMI ln AI Sound
AutoOn
Off Off
BBE Off
On
Press the MENU key to activate the main menu and select Audio. (refer to page 24) 
						

							29
Press to select Surround.
Press to select On or Off.
The benefits of Surround sound are enormous.
You can be completely enveloped in sound; just as if you were at a concert hall or cinema.
The Surround effect can be obtained without the use of external Ambience speakers.
CH
VOL
CHVOL
OK
Press to select Speakers.
Press to select On or Off.
• On : TV speakers operate normally.
• Off : TV speakers off. Notes:
• When “BBE VIVA 3D” is set to On, “BBE” and “Surround” setting are fixed to “On” and “3D”.
• When “BBE VIVA 3D” is set to Off, “BBE” and “Surround” can be set individually.
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Press to select BBE VIVA 3D or BBE.
Press to select On or Off.
CH
VOL
CHVOL
OK
Press to select HDMI In.
Press to select the mode.
• Auto : Automatically selects Analog / Digital signal.
• Digital : Digital Input only.
• Analog : Analog  Input  only.
Menu Navigation
Note:
This feature is effective when BBE VIVA 3D is set to Off.
 Surround
Enhances audio response when listening to stereo.
 Speakers
This feature is used to turn TV speakers On or Off (see page 15, Amplifier Connection).
 HDMI In
When using HDMI (see page 16), this feature will let you switch between Analog Input and Digital Input.
 BBE VIVA 3D / BBE
BBE VIVA 3DBBE VIVA 3D provides a musically accurate natural 3D image with hi-fi sound. The clarity of the sound
is improved by BBE while the width, depth and height of the sound image are expanded by BBE’s
proprietary 3D sound processing. BBE VIVA 3D is compatible with all TV programs including news,
music, dramas, movies and sports as well as electronic games. BBE VIVA 3D enhances the surround
sound effect, while maintaining the clarity of dialogue.
BBESound technology enhances speech intelligibility and restores the dynamic range of musical passages
to provide outstanding natural sound. 
						

							30
Channel
Press to select Surf Mode.
Press to select Favorites or All Channels.
Press to enter your selection.
1Press to select Channel.
Press to select the channel.
Press to add the channel.
To delete the channel, press again while the channel number is displayed.
• Repeat step 2 to program up to 16 favorite channels.
2
Press to select RF Input.
Press to select Antenna (A) or Antenna (B).
Press to enter your selection.
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Allows you to create Favorite channel list from Antenna (A) or Antenna (B).
CH
VOL
CHVOL
OK
Menu Navigation
 Surf Mode
 RF Input
 Channel
CH
VOL
CHVOL
OK
Favorite
Surf Mode
All Channels
RF InputAntenna (A)
ChannelA: 2The maximum is 16 favorite channels.
Favorite
CH
VOL
CHVOL
OK
Press to select the menu.
Press to display the sub-menu.
Press the MENU key to activate the main menu and select Channel. (refer to page 24)