Panasonic Digital Cellular Phone Ebg60 Operating Instructions

10
International Dialing  
The international access code (+) and the destination country/region  code
should be entered, followed by the area code and phone number. 
1From Idle press and hold # until “+” is displayed 
2 Enter country/region code (e.g. 44 for the UK; 81 for Japan)  
3 Enter area code and phone number  
4 Press C 
Emergency Calls  
An  emergency  call  may  be  made  even  when  SIM  is  not  fitted  to  the  phone,
however, the antenna symbol ( ) must be present. 
Enter 911 press C....

11
Answering a Call 
To receive a call, the phone must be switched
on and the signal strength meter ( ) must be
displayed. 
Press any key except D to answer a call
or 
Press D to reject a call 
Caller Identification 
This feature allows you to identify incoming calls. 
The caller’s phone number, and name if stored in the Phonebook, will be dis-
played during an incoming call. 
Volume Control  
The volume level may be adjusted during a call: 
Use 5 to decrease the volume; use 1 to increase the volume...

12
Locking the Phone 
When  the  phone  is  locked,  the  phone  lock  code  must  be  entered  each  time
the  phone  is  switched  on  to  unlock  the  phone.  You  may  be  able  to  dial  the
local emergency number and answer incoming calls while the phone is locked.
The Phone Lock Code is factory set to 0000. 
1From Idle  press <  and  select  (Applications >) Phone  Setting >
Security > Phone Lock. Press < 
2 From the submenu select Status and press < 
3 Select On and press < 
4 Enter the 4-digit...

13
Using the PIN  
The  PIN  protects  your  SIM  against  unauthorized  use.  If  you  enable the PIN,
every time the phone is turned on you will be prompted to enter the PIN. 
PIN2  controls  security  for  the  Fixed  Dial  Store,  Call  Charge  metering  and
Barred Dial. 
If either PIN/PIN2 is entered incorrectly 3 times, (It depends on the SIM), the
phone will be locked and the user will need to enter the PUK/PUK2 code. 
Contact your service provider for the PUK/PUK2 code. 
Enabling/Disabling the...

14
Setting Ring Volume 
With the G60, you can set up your phone in different modes depending  on
your environment, allowing different ring tones and volumes in different situa-
tions. 
To change ring volume for any sound profile: 
1From Idle press  Sound Settings. Press < 
2 Select the profile you wish to adjust, press  Ring
Vo l u m e, press < 
3 Use 0 to set the volume level, press < 
See Changing Sound Profiles, page 27, for more information on setting different
ring modes. 
Setting Silent Ring  
You...

15
Phonebook
Phone numbers can be stored in two locations: 
In the SIM Phonebook (E), where the number of ent ries and lengths
of names and numbers are SIM dependent. 
In the Mobile Phonebook, where phonebook entries can be grouped
together  and  additional  data  can  be  stored  with  numbers.  This  phone-
book is retained even if you change your SIM. 
This section contains all you need to know about: 
➪Managing your Phonebooks 
➪Finding entries in your Phonebooks 
➪Speed Dialing 
➪Grouping  Phonebook...

16
To Store a Number in the Mobile Phonebook 
1From Idle  enter  the  phone  number  and
press A  
2 Select Mobile Phonebook and press < 
3 Select Name, press < and enter identi-
fying name. Press < 
4 Select No. and confirm the phone num-
ber. Press < twice 
5 Select Email, press < and enter address.
Press< (optional) 
6 Select Group, press< (optional)
7 Select a group, press< (optional)
8  Select Hot  Key  Dial,  press 

17
Speed Dialing 
Last Number Called  
From Idle press C twice 
Hot Key Dialing (Mobile Phonebook Only) 
From Idle press and hold the appropriate hot key number
To view your hot key dial list, from Idle  press 
Hot Key Dial List, press  Hot Key Dial. Press < 
3 Enter the Hot Key dial number (from $ to ,)  for  this  entry.
Press< 
4 Press A to save
Info Numbers or Service Dial 
Your  Service  Provider  may  program  some  special  phone  numbers  into  your
SIM (F). It is not possible to modify these: 
1...

18
Editing Phonebook Entries 
It  is  possible  to  view Entry  Details, Edit, Delete, Create or Copy  Entry
information from the Phonebooks. To access any of these functions: 
With a phone number or name highlighted: 
1 Press < to select the submenu 
2 Use 4 to cycle through Entry  Details,
Edit, Delete, Create or Copy Entry 
3 Press < to select an option 
Entry Details 
Displays  each  element  of  the  selected  Phonebook  entry:  Name,  number  and
location of entry (SIM or Phone) etc. Press < to...

19
Synchronizing Phonebooks 
Keep  your  SIM  and  Mobile  Phonebooks  in  step  by  synchronizing  their  con-
tents  regularly.  You  can  copy  individual  entries  between  phonebooks  (see
Editing  Phonebook Entries, page 18) or  simply  copy  the  entire  contents of  one
phonebook into the other. To do this: 
1From Idle,  press < and select Phone-
book > Copy Entries. Press <   
2 Use 4  to  either  copy  the  entries  of SIM
to  Phone or Phone  to  SIM.  Press <
twice to select 
Review the...