Panasonic Digital Camera Dmc Zs9 Owners Manual For Advanced Features

							100   VQT3H43VQT3H43   101
Using the [Playback] menu (Continued)
Playback Mode: 
For the [Playback] menu setting procedure (→17)
 [Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Fa\
ce Recognition.
Select [REPLACE] or 
[DELETE] 
Select the picture 
Select a person 
 • If [DELETE], go to step  
 • People whose Face Recognition  information has not been registered 
cannot be selected.
Select the person to replace 
for another 
Select [Yes] 
 • After setting, press [ / ] to return to 
the menu screen.
 
●When Face Recognition information is deleted, it cannot be restored. 
●Pictures for which all Face Recognition information has been deleted are\
 not 
categorized in Face Recognition during [Category Selection].
 
●Recognition information cannot be edited in protected pictures.
 [Copy]
You can copy pictures between built-in memory and memory card.
Select the copy method (direction)
:  Copy all pictures from built-in memory to card (go to step ).:  Copy 1 picture at a time from card to built-in memory.
Select picture with  ◄ ►  and press [MENU/SET] (for )
Select [Yes]
 • To cancel → Press [MENU/SET].
 • After all the pictures are copied from the built-in memory to the memory\
 
card, the display returns automatically to the playback screen.
 
●Copying pictures may take several minutes. Do not turn off power or perform other 
operations during copying.
 
●If identical names (folder/file numbers) are present in the copy desti\
nation, a new 
folder for copying will be created when copying from built-in memory to \
card (). 
Identically-named files will not be copied from card to built-in memory \
(). 
●The following settings are not copied. Set them again after copying.- [Print Set]    - [Protect]    - [Favorite] 
●Only pictures from Panasonic digital cameras (LUMIX) may be copied. 
						

							102   VQT3H43VQT3H43   103
 
Using with your PC
Still/motion pictures can be copied from the camera to your computer by \
connecting the 
two together. • Some computers can read directly from the camera’s memory card.For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards, a message will be d\
isplayed  requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following suppor\
t website.
http://panasonic.net/avc/sdcard/information/SDXC.html
 • Copied pictures can then be printed out or sent by e-mail using the  “PHOTOfunSTUDIO” software on the CD-ROM (supplied).
 
■Computer specifications
Windows Macintosh
98/98SE Me/2000 XP/Vista/7 OS 9/OS X
Can I use 
“PHOT OfunSTUDIO”? No

Yes∗
No
Can I copy still pictures 
and Motion JPEG motion 
pictures from my camera 
to my computer via USB 
connection cable? No
Yes Ye s
OS 9.2.2
OS X (10.1 - 10.6)
 • USB connection cables cannot be used with Windows 98/98SE, Mac OS 8.x, o\
r older  versions of either, but still/motion pictures may still be copied with compatible SD 
memory card reader/writers.
∗
 Internet Explorer 6.0 or above must be installed.
Correct playback and operation depends on your computer’s environment and cannot 
always be guaranteed.
 Copying still pictures and motion pictures 
Getting Ready:
 • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler (optional).
 • Insert the card and turn on power. When importing pictures from the built-in memory,  remove any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)  • Do not disconnect the USB connection cable while [Access] is displayed. USB connection cable
(always use cable supplied)
Turn on power of both 
camera and computer
Connect camera to 
computer
 • Please make sure you use the 
supplied USB connection cable.
Use of cables other than the 
supplied USB connection cable 
may cause malfunction.
Select [PC] on the camera
A message may be displayed on 
screen if [USB Mode] (→22) is set to 
[PictBridge(PTP)]. Select [Cancel] to close 
the screen, and set [USB Mode] to [PC].
Operate with your 
computer
 
■To cancel connection
Click “Safely Remove Hardware”  in the Windows System Tray 
						

							102   VQT3H43VQT3H43   103
 
Using with your PC
Still/motion pictures can be copied from the camera to your computer by \
connecting the 
two together. • Some computers can read directly from the camera’s memory card.For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards, a message will be d\
isplayed  requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following suppor\
t website.
http://panasonic.net/avc/sdcard/information/SDXC.html
 • Copied pictures can then be printed out or sent by e-mail using the  “PHOTOfunSTUDIO” software on the CD-ROM (supplied).
 
■Computer specifications
Windows Macintosh
98/98SE Me/2000 XP/Vista/7 OS 9/OS X
Can I use 
“PHOT OfunSTUDIO”? No

Yes∗
No
Can I copy still pictures 
and Motion JPEG motion 
pictures from my camera 
to my computer via USB 
connection cable? No
Yes Ye s
OS 9.2.2
OS X (10.1 - 10.6)
 • USB connection cables cannot be used with Windows 98/98SE, Mac OS 8.x, o\
r older  versions of either, but still/motion pictures may still be copied with compatible SD 
memory card reader/writers.
∗
 Internet Explorer 6.0 or above must be installed.
Correct playback and operation depends on your computer’s environment and cannot 
always be guaranteed.
 Copying still pictures and motion pictures 
Getting Ready:
 • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler (optional).
 • Insert the card and turn on power. When importing pictures from the built-in memory,  remove any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)  • Do not disconnect the USB connection cable while [Access] is displayed. USB connection cable
(always use cable supplied)
Turn on power of both 
camera and computer
Connect camera to 
computer
 • Please make sure you use the 
supplied USB connection cable.
Use of cables other than the 
supplied USB connection cable 
may cause malfunction.
Select [PC] on the camera
A message may be displayed on 
screen if [USB Mode] (→22) is set to 
[PictBridge(PTP)]. Select [Cancel] to close 
the screen, and set [USB Mode] to [PC].
Operate with your 
computer
 
■To cancel connection
Click “Safely Remove Hardware”  in the Windows System Tray 
						

							104   VQT3H43VQT3H43   105
Using with your PC (Continued)
∗1 New folders are created in the following cases: • When pictures are taken to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.)
 • When recording after performing [No.Reset].
∗
2   Note that if files in the AD_LUMIX folder or its subfolders are deleted, pictures cannot 
be uploaded to image-sharing websites.
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] ( →22) is set to 
[PictBridge(PTP)].  • Only picture output can be performed. 
 • It may not be possible to import if there are 1000 or more pictures on t\
he card.
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 
■ Folder and file names on computer
 
●Do not use any other USB connection cables except the supplied one. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel communication via your computer immediately (recharge the batter\
y before 
reconnecting).
 
●Setting the [USB Mode] to [PC] removes the need to make the setting each\
 time the 
camera is connected to the computer.
 
●For more details, consult your computer operating manual.
DCIM (Still pictures/motion pictures)
100_PANA  (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
  :
999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX (Folder for Web uploading) ∗
2
LUMIXUP.EXE (Uploading tool)
JPG: 
Still pictures
MOV: 
Motion pictures
Using “PHOTOfunSTUDIO” to copy pictures to your computer
After importing pictures to your computer, you can print or e-mail them. 
●Read the separate operating instructions for more information about the \
operating 
environment and the installation.
 Uploading pictures to image-sharing websites
Using the uploading tool (LUMIX Image Uploader), you can upload still \
pictures and 
motion pictures to image-sharing websites (Facebook or YouTube).
There is no need to copy pictures to your computer or install specialize\
d software. 
Uploading pictures from the camera is easy with a computer connected to \
a network, 
even when you are away from your regular computing environment.
 • This tool supports only computers that run on Windows XP, Windows Vista, and Windows 7.
(To view the manual for LUMIX Image Uploader, use Internet Explorer.)
Getting ready:  • Use [Upload Set] to select the pictures for uploading
 • Connect your computer to the Internet
 • Create an account for the applicable image-sharing website and prepare y\
our login information
Double-click “LUMIXUP.EXE” to start it. 
 • If you have installed “PHOTOfunSTUDIO” from the CD-ROM (supplied), Uploading tool (LUMIX Image Uploader) may start automatically. 
Select the upload destination
 
• Do the further steps in accordance with the instructions displayed on th\
e computer 
screen.
 
●Because YouTube and Facebook services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available services and 
screens are subject to change without notice. 
(This service is available as of December 1, 2010) 
 
●Do not upload pictures protected by copyright except when you are the co\
pyright holder 
or permission has been obtained from the corresponding copyright holder. 
∗
1
 
● Windows
  Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
● Macintosh
  Drives are displayed 
on the desktop.
(Displayed as 
“LUMIX”, “NO_NAME”, 
or “Untitled”.) 
						

							104   VQT3H43VQT3H43   105
Using with your PC (Continued)
∗1 New folders are created in the following cases: • When pictures are taken to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.)
 • When recording after performing [No.Reset].
∗
2   Note that if files in the AD_LUMIX folder or its subfolders are deleted, pictures cannot 
be uploaded to image-sharing websites.
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] ( →22) is set to 
[PictBridge(PTP)].  • Only picture output can be performed. 
 • It may not be possible to import if there are 1000 or more pictures on t\
he card.
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 
■ Folder and file names on computer
 
●Do not use any other USB connection cables except the supplied one. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel communication via your computer immediately (recharge the batter\
y before 
reconnecting).
 
●Setting the [USB Mode] to [PC] removes the need to make the setting each\
 time the 
camera is connected to the computer.
 
●For more details, consult your computer operating manual.
DCIM (Still pictures/motion pictures)
100_PANA  (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
  :
999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX (Folder for Web uploading) ∗
2
LUMIXUP.EXE (Uploading tool)
JPG: 
Still pictures
MOV: 
Motion pictures
Using “PHOTOfunSTUDIO” to copy pictures to your computer
After importing pictures to your computer, you can print or e-mail them. 
●Read the separate operating instructions for more information about the \
operating 
environment and the installation.
 Uploading pictures to image-sharing websites
Using the uploading tool (LUMIX Image Uploader), you can upload still \
pictures and 
motion pictures to image-sharing websites (Facebook or YouTube).
There is no need to copy pictures to your computer or install specialize\
d software. 
Uploading pictures from the camera is easy with a computer connected to \
a network, 
even when you are away from your regular computing environment.
 • This tool supports only computers that run on Windows XP, Windows Vista, and Windows 7.
(To view the manual for LUMIX Image Uploader, use Internet Explorer.)
Getting ready:  • Use [Upload Set] to select the pictures for uploading
 • Connect your computer to the Internet
 • Create an account for the applicable image-sharing website and prepare y\
our login information
Double-click “LUMIXUP.EXE” to start it. 
 • If you have installed “PHOTOfunSTUDIO” from the CD-ROM (supplied), Uploading tool (LUMIX Image Uploader) may start automatically. 
Select the upload destination
 
• Do the further steps in accordance with the instructions displayed on th\
e computer 
screen.
 
●Because YouTube and Facebook services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available services and 
screens are subject to change without notice. 
(This service is available as of December 1, 2010) 
 
●Do not upload pictures protected by copyright except when you are the co\
pyright holder 
or permission has been obtained from the corresponding copyright holder. 
∗
1
 
● Windows
  Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
● Macintosh
  Drives are displayed 
on the desktop.
(Displayed as 
“LUMIX”, “NO_NAME”, 
or “Untitled”.) 
						

							106   VQT3H43VQT3H43   107
Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.  Printing
 
■To cancel print    Press [MENU/SET].
 
●Do not use any other USB connection cables except the supplied one. 
●Disconnect USB connection cable after printing. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel printing and disconnect USB connection cable (recharge the batte\
ry before 
reconnecting).
You can connect directly to a PictBridge-
compatible printer for printing.
Getting Ready:
 • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler 
(optional). 
 • Insert the card and turn on power. When  copying pictures from the built-in memory, 
remove any memory cards.
 • Adjust the print quality or other settings on  your printer, as needed.
Turn on power of camera 
and printer
Connect camera to 
printer 
 • Make sure you use the supplied  USB connection cable. Use of 
cables other than the supplied 
USB connection cable may cause 
malfunction.
Select [PictBridge(PTP)] 
on the camera
When [Connecting to PC…] is 
displayed, cancel the connection and 
set [USB Mode] ( →22) to either [Select 
on connection] or 
[PictBridge(PTP)].
Press ◄►  to select a 
picture to print and press 
[MENU/SET]
Select [Print start]
 • Print settings (→108)
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
 • Do not disconnect the USB connection cable 
when the cable disconnection icon 
 is displayed 
(displayed with some printers).
USB connection cable
(always use cable supplied)
Printing multiple pictures
Select [Multi Print] in 
step  on the previous 
pageSelect item
(See below for details)Print 
(Previous page )
 • [Multi Select]         :  Scroll between pictures with  ▲▼◄►, select pictures to print 
with the [DISP.] button. (Press [DISP.] button again to release 
selection.)
                               
  Press [MENU/SET] when selection is complete.
 • [Select All]            :Print all pictures.
 • [Print Set (DPOF)]  : Print pictures selected in [Print Set].
 • [Favorite]              : Print pictures selected as [Favorite].
(The setting is displayed only when there are pictures that have 
been set as [Favorite].)
 
●Select [Yes] if print confirmation screen is displayed. 
●An orange ● displayed during printing indicates an error message.  
●Print may be divided into several times if printing a large amount of pi\
ctures.
(Remaining sheets display may differ from set number.)
Print with date and text
 
■
Printing date without [Text Stamp]
 
●Printing in store: Only recording date can be printed. Request date prin\
ting in store.
 •Making [Print Set] settings on the camera in advance allows settings for\
 numbers of 
copies and date printing to be designated before giving the card to the \
store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store can accept this size.
 
●Using computer : Print settings for recording date and text information can be made 
using the supplied CD-ROM “PHOTOfunSTUDIO”.
 
●Using printer    :  Recording date can be printed by setting [Print Set] on the camera, 
or by setting [Print with Date] (→110) to [ON] when connecting to a 
printer compatible with date printing. 
						

							106   VQT3H43VQT3H43   107
Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.  Printing
 
■To cancel print    Press [MENU/SET].
 
●Do not use any other USB connection cables except the supplied one. 
●Disconnect USB connection cable after printing. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel printing and disconnect USB connection cable (recharge the batte\
ry before 
reconnecting).
You can connect directly to a PictBridge-
compatible printer for printing.
Getting Ready:
 • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler 
(optional). 
 • Insert the card and turn on power. When  copying pictures from the built-in memory, 
remove any memory cards.
 • Adjust the print quality or other settings on  your printer, as needed.
Turn on power of camera 
and printer
Connect camera to 
printer 
 • Make sure you use the supplied  USB connection cable. Use of 
cables other than the supplied 
USB connection cable may cause 
malfunction.
Select [PictBridge(PTP)] 
on the camera
When [Connecting to PC…] is 
displayed, cancel the connection and 
set [USB Mode] ( →22) to either [Select 
on connection] or 
[PictBridge(PTP)].
Press ◄►  to select a 
picture to print and press 
[MENU/SET]
Select [Print start]
 • Print settings (→108)
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
 • Do not disconnect the USB connection cable 
when the cable disconnection icon 
 is displayed 
(displayed with some printers).
USB connection cable
(always use cable supplied)
Printing multiple pictures
Select [Multi Print] in 
step  on the previous 
pageSelect item
(See below for details)Print 
(Previous page )
 • [Multi Select]         :  Scroll between pictures with  ▲▼◄►, select pictures to print 
with the [DISP.] button. (Press [DISP.] button again to release 
selection.)
                               
  Press [MENU/SET] when selection is complete.
 • [Select All]            :Print all pictures.
 • [Print Set (DPOF)]  : Print pictures selected in [Print Set].
 • [Favorite]              : Print pictures selected as [Favorite].
(The setting is displayed only when there are pictures that have 
been set as [Favorite].)
 
●Select [Yes] if print confirmation screen is displayed. 
●An orange ● displayed during printing indicates an error message.  
●Print may be divided into several times if printing a large amount of pi\
ctures.
(Remaining sheets display may differ from set number.)
Print with date and text
 
■
Printing date without [Text Stamp]
 
●Printing in store: Only recording date can be printed. Request date prin\
ting in store.
 •Making [Print Set] settings on the camera in advance allows settings for\
 numbers of 
copies and date printing to be designated before giving the card to the \
store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store can accept this size.
 
●Using computer : Print settings for recording date and text information can be made 
using the supplied CD-ROM “PHOTOfunSTUDIO”.
 
●Using printer    :  Recording date can be printed by setting [Print Set] on the camera, 
or by setting [Print with Date] (→110) to [ON] when connecting to a 
printer compatible with date printing. 
						

							108   VQT3H43VQT3H43   109
Printing (Continued) 
Viewing on TV screen
 Making print settings on the camera
(Make settings before selecting [Print start])
Select itemSelect setting
ItemSettings
[Print with 
Date] [ON]/[OFF]
[Num.of 
prints] Set number of pictures (up to 999 pictures)
[Paper Size]
 (printer takes priority)
[L/3.5”×5”]    (89×127 mm)
[2L/5”×7”]     (127×178 mm)
[POSTCARD]  (100×148 mm)
[16:9]          (101.6×180.6 mm)
[A4]             (210 ×297 mm) [A3]            (297×420 mm)
[10×15 cm]
   (100×150 mm)
[4”×6”]       (101.6×152.4 mm)
[8”×10”]       (203.2 ×254 mm)
[LETTER]    (216×279.4 mm)
[CARD SIZE] (54×85.6 mm)
[Page 
Layout]
 (printer takes priority) /  (1 picture, no border) /  (1 picture, with border) /  (2 pictures) /  (4 pictures)
 
●Items only compatible with the printer may be displayed. 
●To arrange  “2 pictures” or  “4 pictures” in the same still picture, set the 
number of prints for the still picture to 2 or 4.
 
●To print to paper sizes/layouts not supported by this camera, set to  and make 
settings on the printer. (Consult your printer’s operating manual.)
 
●[Print with Date] and [Num.of prints] are not shown when you have select\
ed [Print 
Set] settings.
 
●Even with completed [Print Set] settings, dates may not be printed, depe\
nding on 
the shop or printer used.
 
●When setting [Print with Date] to [ON], check the date printing settings\
 on the 
printer (printer settings may be prioritized). Getting Ready:
 • Set [TV Aspect]. ( →23)
 • Turn off both camera and TV.
You can view pictures on a TV screen by 
connecting your camera to your TV with the 
AV cable (supplied).
 
●Also consult TV operating manual.
Connect camera to TV
Turn on TV
 
●Set to auxiliary input.
Turn on camera
Set REC/PLAY switch to 
 
■When TVs or DVD recorders have an SD card slot
Insert the SD Memory Card into the SD card slot
 • Still pictures only can be played back.
 • To play motion pictures on other televisions, please connect the camera t\
o the television with the AV cable (supplied). 
 • When using both SDHC and SDXC Memory Cards, be sure to play each type of\
 card  in equipment compatible with the particular format.
 
●Do not use any other AV cables except the supplied one. 
●You can play back pictures on TVs in other countries (regions) which use the NTSC or 
PAL system when you set [Output] in [Setup] menu. ( →23) (DMC-ZS8PU/DMC-TZ18PR 
only.)
 
●Pictures rotated to portrait may be blurred slightly. 
●Change settings for picture mode on TV if aspect ratios are incorrect on widescreen or 
high-definition televisions. Check socket direction and insert straight in. 
(Damage to socket shape can lead to faulty 
operation.)
AV cable
(always use cable supplied) White: To audio socket Yellow: To video socket 
						

							108   VQT3H43VQT3H43   109
Printing (Continued) 
Viewing on TV screen
 Making print settings on the camera
(Make settings before selecting [Print start])
Select itemSelect setting
ItemSettings
[Print with 
Date] [ON]/[OFF]
[Num.of 
prints] Set number of pictures (up to 999 pictures)
[Paper Size]
 (printer takes priority)
[L/3.5”×5”]    (89×127 mm)
[2L/5”×7”]     (127×178 mm)
[POSTCARD]  (100×148 mm)
[16:9]          (101.6×180.6 mm)
[A4]             (210 ×297 mm) [A3]            (297×420 mm)
[10×15 cm]
   (100×150 mm)
[4”×6”]       (101.6×152.4 mm)
[8”×10”]       (203.2 ×254 mm)
[LETTER]    (216×279.4 mm)
[CARD SIZE] (54×85.6 mm)
[Page 
Layout]
 (printer takes priority) /  (1 picture, no border) /  (1 picture, with border) /  (2 pictures) /  (4 pictures)
 
●Items only compatible with the printer may be displayed. 
●To arrange  “2 pictures” or  “4 pictures” in the same still picture, set the 
number of prints for the still picture to 2 or 4.
 
●To print to paper sizes/layouts not supported by this camera, set to  and make 
settings on the printer. (Consult your printer’s operating manual.)
 
●[Print with Date] and [Num.of prints] are not shown when you have select\
ed [Print 
Set] settings.
 
●Even with completed [Print Set] settings, dates may not be printed, depe\
nding on 
the shop or printer used.
 
●When setting [Print with Date] to [ON], check the date printing settings\
 on the 
printer (printer settings may be prioritized). Getting Ready:
 • Set [TV Aspect]. ( →23)
 • Turn off both camera and TV.
You can view pictures on a TV screen by 
connecting your camera to your TV with the 
AV cable (supplied).
 
●Also consult TV operating manual.
Connect camera to TV
Turn on TV
 
●Set to auxiliary input.
Turn on camera
Set REC/PLAY switch to 
 
■When TVs or DVD recorders have an SD card slot
Insert the SD Memory Card into the SD card slot
 • Still pictures only can be played back.
 • To play motion pictures on other televisions, please connect the camera t\
o the television with the AV cable (supplied). 
 • When using both SDHC and SDXC Memory Cards, be sure to play each type of\
 card  in equipment compatible with the particular format.
 
●Do not use any other AV cables except the supplied one. 
●You can play back pictures on TVs in other countries (regions) which use the NTSC or 
PAL system when you set [Output] in [Setup] menu. ( →23) (DMC-ZS8PU/DMC-TZ18PR 
only.)
 
●Pictures rotated to portrait may be blurred slightly. 
●Change settings for picture mode on TV if aspect ratios are incorrect on widescreen or 
high-definition televisions. Check socket direction and insert straight in. 
(Damage to socket shape can lead to faulty 
operation.)
AV cable
(always use cable supplied) White: To audio socket Yellow: To video socket 
						

							110   VQT3H43VQT3H43   111
Press the [DISP.] button to change display (→39). 
List of LCD monitor displays
 In recording
1Recording Mode ( →26)
2 Picture Size (→70)
Recording quality ( →62)
3 Quality (→71)
Flash (→40)
Optical Image Stabilizer ( →80)/
Jitter alert (→30)
White Balance ( →72)
Color Mode ( →79)
4 Battery capacity (→15)
5 Burst Mode (→78)
Auto Bracket (→47)
Macro recording ( →42)
i.Exposure (→77)
Wind Cut (→82)
6 Focus (→31)
7 AF area (→31)
8 Histogram (→39)
9 Self-timer Mode (→45) 10
Focus range (→44)
Zoom (→32)/Macro Zoom (→43)
11 ISO Sensitivity (→71)
Aperture value/Shutter speed ( →30, 48, 49, 50)
Minimum shutter speed ( →77)
12 Exposure Compensation ( →46)
AF Tracking (→29, 74)
AF Assist Lamp (→80)
Metering Mode ( →76)
13 Current date/time (→16)
14 Age in years/months ( →56, 65)
Destination settings ( →68)
15 Travel elapsed days ( →68)
LCD Mode ( →20)
Elapsed recording time ( →61)
XXhXXmXXs
∗
16 Date Stamp (→81)
17 Save destination ( →14)
Recording state
18 Number of recordable pictures ( →15)
Available recording time ( →61)
RXXhXXmXXs
∗
∗
   [h], [m] and [s] indicate “hour”, “minute” and  “second”.
13 14 15 17
16 18
6
7 5
8
11 10 9
12
12 3 4
In playback
Screens shown here are only examples. The actual display may vary.
1
Playback Mode ( →87)
2 Protected picture (→99)
Favorites (→97)
Text stamped display ( →93)
Date Stamp (→81)
Color Mode ( →79)
Picture size (→70)
Quality (→71)
3 Battery capacity (→15)
4 Picture number/Total pictures ( →37)
Elapsed playback time ( →86)
XXhXXmXXs
∗1
5 Quantity of pictures to print (→98) 6
Histogram (→39)
7 Destination
∗2 (→68)
Name∗2 (→56, 65)
Title∗2 (→92)
Recording information
Recorded date and time
Destination settings ( →69)
8 LCD Mode ( →20)
Travel elapsed days ( →68)
9 Folder/File number ( →22, 37, 104)
Save destination ( →14)
Cable disconnection warning icon ( →106)
Motion picture recording time ( →86)
XXhXXmXXs
∗1
10 Motion pictures ( →86)
∗1  [h], [m] and [s] indicate “hour”, “minute” and 
“second”.
∗2  The order of priority for display is location 
name information, title, destination, name 
([Baby]/[Pet]), name ([Face Recog.]).
1
10 4
5
6
9
8 23
7