Panasonic Digital Camera Dmc Zs50 Basic Owners Manual

							 (ENG) SQT0612   21
 
■Recording modes[Intelligent Auto] Mode
Take pictures with automatic settings.
You can switch to the [Intelligent Auto Plus] Mode on the menu to adjust the 
brightness and color settings to your liking.
[Program AE] Mode
Take pictures with automatic shutter speed and aperture value settings.
[Aperture-Priority] Mode
Determine aperture, then record pictures.
[Shutter-Priority] Mode
Determine shutter speed, then record pictures.
[Manual Exposure] Mode
Determine aperture and shutter speed, then record pictures.
[Custom] Mode
Record pictures using pre-registered settings.
[Panorama Shot] Mode
Record panorama pictures.
[Scene Mode]
This allows you to take pictures that match the scene being recorded.
[Creative Control] Mode
Take pictures by selecting your preferred picture effect.
 
■Zoom types
You can adjust the area of a picture to be taken using zoom.
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
 • Optical Zoom
Zooming in up to 30x is possible if pictures without [ 
 ] have been selected 
by [Picture Size] on the [Rec] menu.
 • Extended optical zoom
Zooming in up to 58.6x is possible when pictures with [ 
 ] have been 
selected by [Picture Size] on the [Rec] menu.
(Continued on the next page) 
						

							22   SQT0612 (ENG)
Taking pictures with automatic settings  [Intelligent Auto] Mode
 •[i.Zoom]
Increase the zoom ratio up to 2x higher than the original zoom ratio wit\
h 
limited deterioration of picture quality. 
Set the [i.Zoom] in the [Rec] menu to [ON].
 • [Digital Zoom]
Zoom 4x further than Optical/Extended optical zoom. When [Digital Zoom] \
is used simultaneously with [i.Zoom], you can only increase the zoom rat\
io 
up to 2x.
Note that, with Digital Zoom, enlarging will decrease picture quality. 
Set the [Digital Zoom] in the [Rec] menu to [ON].
 •  [Step Zoom]
Each time the control ring/control dial is operated, the zoom stops at t\
he 
position for one of the preset focal lengths.
 
■Menu convenient for taking pictures
 •[Picture Size]
Estimated recording capacity (number of pictures)
[Picture Size] 12M5M0.3M
Built-in Memory 1629450
Card (8 GB) 1540262040310
Card (32 GB) 6260 10620 162960
Card (64 GB) 12670 21490 247150
(When [Aspect Ratio] is set to [  ] and [Quality] is set to [  ])
 • [Time Lapse Shot]
You can preset data such as recording start time and time lapse to take 
still pictures automatically. This setting is convenient for taking pictures 
at constant intervals for landscape scenes, observation of the gradual 
changes in animals/plants, and other applications. When [Time Lapse 
Video] in the [Playback] menu is used, you can create a motion picture. 
 
●Please refer to “Owner’s Manual for advanced features (PDF 
format)” for details. 
						

							 (ENG) SQT0612   23
Recording motion pictures
You can record motion pictures with audio (stereo).
You can record motion pictures fitting each recording mode.
Press the motion picture button () to 
start recording
 
●Do not block the microphones () when recording 
motion pictures.
 
●You can also use zoom while recording motion 
pictures.
 • The zoom speed will be slower than normal.
 • The operating sounds of the zoom lever or control ring/control dial may be recorded in 
some cases.
 
●Still pictures can be taken during motion picture 
recording. 
Press the motion picture button () again to end recording
 
●About recording time
 • You can continuously record a motion picture in [MP4] for up to 29 minute\
s 59 seconds or approx. 4 GB. (Since recording in [MP4] with [FHD/30p] 
creates larger files, the recording time for such motion pictures will b\
e 
shorter than 29 minutes 59 seconds.)
 • If [Rec Quality] of [AVCHD] motion pictures is set to [FHD], you can  continuously record a motion picture for up to 29 minutes 59 seconds. 
 
●Motion pictures cannot be recorded in the following cases.
 • [Panorama Shot] Mode
 • [3D Photo Mode] ([Scene Mode])
 • [Soft Focus]/[Star Filter] ([Creative Control] Mode)
 • When using [Time Lapse Shot] 
						

							24   SQT0612 (ENG)
Recording motion pictures
 
■About the recording format for recording motion pictures
This unit can record motion pictures in either AVCHD or MP4 formats.
The recording format for motion pictures can be changed in [Rec Format] \
of 
the [Motion Picture] menu.
 
■About the recording quality setting
The recording quality for motion pictures can be changed in [Rec Quality\
] of 
the [Motion Picture] menu.
[AVCHD] in [Rec Format]∗ AVCHD  Progressive
Item Picture size fps Bit rate
[FHD/60p]
∗1920×1080 60pApprox. 28 Mbps
[FHD/60i] 1920×1080 60iApprox. 17 Mbps
[HD/60p] 1280×720 60pApprox. 17 Mbps
[MP4] in [Rec Format]Item Picture size fpsBit rate
[FHD/30p] 1920×1080 30pApprox. 20 Mbps
[HD/30p] 1280×720 30pApprox. 10 Mbps
[VGA/30p] 640×48030pApprox. 4 Mbps
 • You can record a motion picture to the built-in memory only in [MP4] usin\
g 
the [VGA] setting.
 
■About motion picture icon
60i
[Rec Format]
Picture size fps
 
●If the surrounding temperature is high, or a motion picture is recorded \
continuously, [  ] is displayed and recording may be stopped halfway 
through to protect the camera.
 
●If Extended optical zoom is used before pressing the motion picture butt\
on, these settings will be cleared, and the recordable area will be changed signif\
icantly. 
						

							 (ENG) SQT0612   25
Using the control ring/control dial
You can use the control ring/control dial to perform frequently used oper\
ations 
and settings directly.
Control ring
Control dial
Items that can be set by the control ring/control dial vary depending on\
 recording 
modes. Following are the pre-assigned settings.
Recording mode Setting
Control ring∗1Control dial
Step Zoom (→22)
Program Shift
Aperture adjustment
Shutter speed adjustment
Aperture adjustment Shutter speed adjustment∗2
Picture effects change
Scene change
Picture effects change
∗1  When Manual Focus is set, the control ring is assigned to focus adjustme\
nt. ∗2  Press  to switch between aperture adjustment and shutter speed adjustment. 
						

							26   SQT0612 (ENG)
Using the control ring/control dial
 
■To change the settings assigned to the control ring/control dial
Changes the settings assigned to the control ring/control dial.
   Press [MENU/SET]  Press     to select [Setup] menu and press [MENU/SET]  Press   to select [Ring/Dial Set] and press [MENU/SET]  Press   to select [  ] (control ring) or [  ] (control dial), and then press 
[MENU/SET]
   Press   to select the setting and press [MENU/SET]
The following settings can be assigned.
 • [Default Control]  • [Zoom]  • [Step Zoom]
 • [Exposure Comp.]  • [Aspect Ratio]  • [Sensitivity]
 • [White Balance]  • [Not Set] (control ring only)
  Press [Q.MENU/ ] button several times 
●The assigned function setting applies to all the recording modes. Howeve\
r, 
the assigned function may not operate when combined with certain 
recording mode.
 
■Using Quick menu
During recording, you can easily call some of the menu items and set the\
m.
   Press [Q.MENU/ ] button  Press   to select menu items
 • The menu items and setting items that are displayed differ depending on  the recording mode.
  Turn the control ring or control dial to change the setting  Press [MENU/SET] 
						

							 (ENG) SQT0612   27
Registering preferred functions to the 
[Fn1] / [Fn2] button
Taking pictures with the composition determined 
[Composition Guide]
Register frequently used functions from the [Rec] menu, [Setup] menu or \
other 
menus to the [Fn1] button or [Fn2] button for faster operation. • The [Fn1] button (see below) is set to [Composition Guide] and [Fn2] b\
utton (→19) is set to [LVF/Monitor Switch] at the time of purchase.
Press [MENU/SET]
Press     to select [Setup] menu and press [MENU/SET]
Press   to select [Fn Button Set] and press [MENU/SET]
Press   to select the function button you want to assign a 
function to and press [MENU/SET]
Press   to select the function to register and press 
[MENU/SET]
Refer to the [Composition Guide] guidelines to easily take impressive an\
d well-
balanced still pictures.
Press [Fn1] button
 • If the setting of the [Fn1] button has been changed, select [Composition\
 
Guide] in the [Setup] menu and press [MENU/SET].
Press   to select the guideline to display and press 
[MENU/SET]
 • Explanations and examples of the composition will be displayed in turn 
when you press the [DISP.] button.
 
■Guidelines (Examples)
[Rule of Thirds Offset] [Diagonal lines] [Radiation] 
						

							28   SQT0612 (ENG)
Viewing your pictures
Press the Playback button ()
 • By holding down the Playback button while the camera is off, you can turn the camera 
on in playback mode.
Press   or turn the control dial to select the picture to be 
displayed
Folder/File numberPicture number/
Total pictures
With location information
 • To play back a motion picture, select a picture with the motion picture  icon, and press
 .
Deleting pictures
Deleted pictures cannot be recovered.
Press [] button () to delete the 
displayed picture
Press  to select [Yes] and then 
press [MENU/SET] () 
						

							 (ENG) SQT0612   29
What you can do with the Wi-Fi® function/
NFC function
 
■Using the camera by connecting it to a smartphone/tablet
By installing the “Panasonic Image App” on your smartphone/tablet, you can 
operate the camera remotely and use the smartphone/tablet to record and \
play back. In addition, you can copy pictures in the camera to the smart\
phone/
tablet.
Hereafter, this manual uses the term “smartphone” for both smartphones and \
tablets unless it is necessary to distinguish between them.
 • Taking pictures via a smartphone (remote recording) ( →32)
 • Playing back pictures in the camera on a smartphone ( →32)
 • Saving pictures in the camera to the smartphone ( →32)
 • Easily transferring pictures in the camera by establishing Wi-Fi connect\
ion  using the NFC function
 • Adding location information to pictures in the camera
 
■Additional things you can do
 • View pictures on a TV 
 • Print wirelessly
 • Send pictures to Wi-Fi compatible equipment
 • Send pictures to social networking services, etc. through “LUMIX CLUB\
”. http://lumixclub.panasonic.net/eng/c/
 • Transfer pictures automatically [Smart Transfer]
 
●Please refer to “Owner’s Manual for advanced features (PDF format)” for 
details. 
						

							30   SQT0612 (ENG)
Using the camera by connecting it to a 
smartphone/tablet
You can connect to and operate this unit using a smartphone by following \
three steps.
STEP 1  Preparing the smartphone:
Installing the special app “Panasonic Image App”∗1
∗1 Hereafter “Image App”
The “Image App” is an application provided by Panasonic. 
• Supported OS 
iOS: iOS 6.0 or later
∗2Android™: Android 2.3.3 or later∗3∗2  iPhone 3GS is not supported.∗3  To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the 
device must be compatible with Wi-Fi Direct™.
Connect the smartphone to a network

Select “App StoreSM”

Select “Google Play
TM Store”
Enter “Panasonic Image App” or “LUMIX” to search for the 
app
Select “Panasonic Image App”  and install it
 • Use the latest version.
 • Supported OS versions as of January 2015. Supported OS versions may be c\
hanged  without prior notice.
 
• Some of the screens and information provided in this document may be dif\
ferent depending 
on the supported operating system and “Image App” version.
 • The service may not be able to be used properly depending on the type of\
 smartphone  being used.
 • For details about the operating procedure, etc., refer to [Help] in the \
“Image App” menu.
 • For the latest information on the “Image App”, refer to the support site below. http://panasonic.jp/support/global/cs/dsc/ (This site is available in E\
nglish only.)