Home > Panasonic > Digital Camera > Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

Here you can view all the pages of manual Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.

Page 61

Basics
Setting the menuVQT5E74
- 61 -
Menu type
 ●In Recording Mode ●In Playback Mode
[Rec] You can perform settings such as tones, Sensitivity, Aspect Ratio, 
and Picture Size.
[Motion Picture] You can select the recording format and picture quality and other 
settings.
[GPS] You can select the GPS setting, location name display and other 
settings.
[Setup] You can perform settings for convenience of use such as the clock 
setting and changing of the beep sounds.
[Wi-Fi] You can perform settings...

Page 62

Basics
Using the [Setup] menu
VQT5E74- 62 -
[Clock Set], [Economy] and [Auto Review] are important for clock setting and 
battery life. Please check these before use.
 • For the setting procedures of the menu. (→60)
 ●In [Intelligent Auto] Mode, only [Clock Set], [World Time], [Airplane Mode], [Beep], 
[Composition Guide] and [Language] are set.
[Clock Set]
Set time, date, and display format. (→29)
[Auto Clock Set]
Setting the clock automatically using GPS.  (→265)
[World Time]
Set the local time at...

Page 63

Basics
Using the [Setup] menuVQT5E74
- 63 -
 • For the setting procedures of the menu.  (→60)
[Beep]
Change or mute the beep/shutter sounds.
 ●[Beep Level]
 ■Settings:  ([Low]) /  ([High]) /  ([OFF])
 ●[Beep Tone]
 ■Settings:  /  / 
 ●[Shutter Vol.]
 ■Settings:  ([Low]) /  ([High]) /  ([OFF])
 ●[Shutter Tone]
 ■Settings:  /  / 
 ■Beep sounds when operating the control ring
Beep sounds are audible when turning the control ring.
Regardless of the [Beep Level] setting, no beep sounds are audible in the...

Page 64

Basics
Using the [Setup] menuVQT5E74
- 64 -
 • For the setting procedures of the menu.  (→60)
[Cust.Set Mem.]
Register the current camera settings.  (→131)
[Fn Button Set]
Register frequently used functions from the [Rec] menu, [Setup] menu or other menus to 
the [Fn] button for faster operation. (→133)
[Zoom Lever Set]
Switches the zoom lever operation setting.  (→83)
 ■Settings
[Zoom]The zoom operates in the normal way.
[Step Zoom]Each time zoom is operated, the zoom stops at the position for one of...

Page 65

Basics
Using the [Setup] menuVQT5E74
- 65 -
 • For the setting procedures of the menu.  (→60)
[Live View Mode]
Sets the display speed and picture quality of the screen (Live V iew screen) when 
recording pictures using the LCD monitor or viewfinder.
 ■Settings
[30fps] Picture quality has higher priority over display speed and pictures are displayed at 
30 fps.
For example, use when you want to record a comparatively slow-moving subject 
while confirming the focusing.
[60fps] Display speed has higher...

Page 66

Basics
Using the [Setup] menuVQT5E74
- 66 -
 • For the setting procedures of the menu.  (→60)
[Monitor Luminance]
Make LCD monitor easier to see.
 ■Settings
[Auto Power Monitor] The brightness is adjusted automatically depending on how bright it 
is around the camera.
[Power Monitor]
The brightness becomes higher than usual for easy viewing outdoors.
[OFF] —
 ●Cannot select [Auto Power Monitor] in Playback Mode. ●[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds 
when...

Page 67

Basics
Using the [Setup] menuVQT5E74
- 67 -
 • For the setting procedures of the menu.  (→60)
[Histogram]
Displays distribution of brightness in picture – e.g. 
if the graph peaks at the right, this means there are 
several bright areas in the picture. A peak in the center 
represents correct brightness (correct exposure). This 
can be used as a reference for exposure correction, etc.
(Example)
Dark ← OK → Bright
 ■Settings: [ON] / [OFF]
 ●When the histogram is not the same as that of the recorded...

Page 68

Basics
Using the [Setup] menuVQT5E74
- 68 -
 • For the setting procedures of the menu.  (→60)
[Remaining Disp.]
Switch the display between the remaining number of still pictures you can take or the 
remaining recording time of a motion picture that you can record for the available card or 
built-in memory.
 ■Settings
This will display the number of recordable pictures for still pictures.
This will display the available recording time for motion pictures.
[Lens Resume]
 ●[Zoom Resume]
Remember the zoom...

Page 69

Basics
Using the [Setup] menuVQT5E74
- 69 -
 • For the setting procedures of the menu.  (→60)
[Economy]
Turn off the camera or make the LCD monitor go dark while not using the camera to 
minimize battery consumption.
 ●[Auto Power Off]
The camera is automatically turned off while not in use.
 ■Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF]
 ●When you want to use the camera again, turn the camera back on. ●Cannot be used in the following cases: • During motion picture recording/playback • During Slide...

Page 70

Basics
Using the [Setup] menuVQT5E74
- 70 -
 • For the setting procedures of the menu.  (→60)
[Auto Review]
Automatically display still pictures immediately after taking them.
 ■Settings
[1SEC] / [2SEC] Displays the playback screen for the set time before automatically returning to 
the recording screen.
[HOLD] Keeps the automatic playback screen displayed until [MENU/SET] is pressed.
[OFF] —
 ●For [Intelligent Auto] Mode, the setting is fixed to [2SEC]. ●Motion pictures cannot be automatically reviewed....
Start reading Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

Related Manuals for Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

All Panasonic manuals