Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

Wi-Fi/NFC
Sending pictures to AV equipment
VQT5E74- 211 -
Still pictures and motion pictures can be sent to AV equipment in the home (home AV 
equipment), such as DLNA compatible recorders. Through “LUMIX CLUB”, you can also 
send your still pictures and motion pictures to AV equipment of family and friends far 
away (outside AV equipment).
You can make a setting so that pictures in the camera can be sent to AV equipment 
automatically while the camera battery is charging. ([Smart Transfer] (→238))...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5E74
- 212 -
Preparations:
When sending a picture to [Home], set your device to DLNA waiting Mode.
 • Read the operating instructions of your device for details.
When sending images to [External], the following are required:
 • Registration to “LUMIX CLUB”.  (→231) • Address number and access number acquired by the destination External A

V device. 
(→236)
See the part of the manual that applies to your objective. 
Sending a picture each time one is recorded...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5E74
- 213 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Home] or [External]
Select [Via Network] or [Direct] to connect (→245)
 • [Direct] cannot be selected when...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5E74
- 214 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Home] or [External]
Select [Via Network] or [Direct] to connect (→245)
 • [Direct] cannot be selected when [External] has...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5E74
- 215 -
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    

Wi-Fi/NFC
Sending pictures to a PC
VQT5E74- 216 -
Still pictures and motion pictures recorded by the camera can be sent to a PC.
You can make a setting so that pictures in the camera can be sent to a PC automatically 
while the camera battery is charging. ([Smart Transfer] (→238))
 ■Sending method, and pictures that can be sent
JPEG RAW MP4AVCHD*3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes Yes No No Yes
Sending selected pictures
[Send Images Stored in the Camera] Yes...

Wi-Fi/NFC
Sending pictures to a PCVQT5E74
- 217 -
 ■To create a folder that receives images
 • Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters.  An attempt to create a receive 
folder may fail if the account includes non-alphanumeric characters.
 ■When using “PHOTOfunSTUDIO”
Install “PHOTOfunSTUDIO” on the PC
 • “PHOTOfunSTUDIO” is not compatible with Mac. • For details on hardware requirements and installation, read...

Wi-Fi/NFC
Sending pictures to a PCVQT5E74
- 218 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Send Images While Recording] 
and press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect (→245)
Select the PC you want to connect to
 • If the PC you want to connect to is not displayed, select [Manual...

Wi-Fi/NFC
Sending pictures to a PCVQT5E74
- 219 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect (→245)
Select the PC you want to connect to
 • If the PC you want to connect to is not displayed, select...

Wi-Fi/NFC
Sending pictures to a PCVQT5E74
- 220 -
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.
 ●Folders sorted by the...