Panasonic Digital Camera Dmc Zs25 Owners Manual For Advanced Features

VQT4P14
Basics
Deleting pictures
- 41 -
To delete multiple (up to 50)/To delete all pictures
Press [ / ] button while viewing a picture
Use   to select [Delete Multi]/[Delete All] and press 
[MENU/SET]
 ●[Delete Multi]
Use cursor button to select picture and press [DISP.] button
 • To cancel → Press [DISP.] button again. • To execute → Press [MENU/SET].
 Picture selected
 • You can select [All Delete Except Favorite] in [Delete All] if there are pictures that 
have been set as [Favorite]  (→125).
 • A...

VQT4P14
Basics
Setting the menu
- 42 -
Refer to the procedure below for an example on how to operate the menus.
Example: 
 Changing [AF Mode] in the [Rec] menu in [Program AE] Mode
Press [MENU/SET]
Press   to select [Rec] menu and press 
[MENU/SET]
Press   to select [AF Mode] and press 
[MENU/SET]
:  Pages
(The pages can also be selected with the zoom lever.)
: Menu description: Menu items: Operation guide
Press   to select a setting, and then press 
[MENU/SET]
The selected setting is set. • To cancel →...

VQT4P14
Basics
Setting the menu
- 43 -
Menu type
 ●In recording mode ●In playback mode
[Rec] menuYou can perform settings such as Tones, Sensitivity, Aspect Ratio, 
and Picture Size.
[Motion Picture] 
menu You can adjust settings such as recording method and picture 
quality.
[Setup] menu You can adjust settings to make operating the camera easier, such 
as setting the clock and changing the beep sounds.
[Playback Mode] 
menu You can adjust settings for playback methods such as [Slide Show] 
and...

VQT4P14
Basics
Setting the menu
- 44 -
Using Quick menu
During recording, you can easily call some of the menu items and set them.
Press [Q.MENU] button
Press   to select a menu item
Press   to select the settings
Press [MENU/SET]
 ●The menu items and setting items that are displayed differ depending on the recording 
mode.    

VQT4P14
Basics
Using the [Setup] menu
- 45 -
[Clock Set], [Economy] and [Auto Review] are important for clock setting and 
battery life. Please check these before use.
 • For the setting procedures of the menu. (→42)
 ●In [Intelligent Auto] Mode, only [Clock Set], [World Time], [Beep] and [Stabilizer 
Demo.] are set.
[Clock Set]
Set time, date, and display format. (→19)
[World Time]
Set the local time at travel destination.  (→94)
 ■Settings
 [Destination]: Set the local time at travel destinatio n....

VQT4P14
Basics
Using the [Setup] menu
- 46 -
 • For the setting procedures of the menu. (→42)
[Speaker Volume]
Adjust volume of sound from speakers (7 levels).
 ■Settings: [0] / [1] / [2] / [3] / [4] / [5] / [6]
 ●Cannot be used to adjust TV speaker volume when connected to TV.
[Cust.Set Mem.]
Register settings on current camera  (→86).
[Monitor Display]
Adjust brightness and color of the LCD monitor. It is suggested to use the default settings. 
These are intended to provide a preview of the actual...

VQT4P14
Basics
Using the [Setup] menu
- 47 -
 • For the setting procedures of the menu. (→42)
[Monitor Luminance]
Make LCD monitor easier to see.
 ■Settings
[Auto Power Monitor]:
The brightness is adjusted automatically depending on how bright it is around the 
camera.
[Power Monitor]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes the LCD monitor screen easier to see when the camera is held above eye 
level.
[OFF]
 ●Cannot select [Auto Power Monitor] and [High Angle] in...

VQT4P14
Basics
Using the [Setup] menu
- 48 -
 • For the setting procedures of the menu. (→42)
[Histogram]
Displays distribution of brightness in picture – e.g. 
if the graph peaks at the right, this means there are 
several bright areas in the picture (Guide). A peak 
in the center represents correct brightness (correct 
exposure). This can be used as a reference for 
exposure correction, etc.
(Example)
Dark ← OK → Bright
 ■Settings: [ON] / [OFF]
 ●When the histogram is not the same as that of the...

VQT4P14
Basics
Using the [Setup] menu
- 49 -
 • For the setting procedures of the menu. (→42)
[Economy]
Turn off the camera or make the LCD monitor go dark while not using the camera to 
minimize battery consumption.
 [Auto Power Off]
Automatically shut off the camera while not in use.
 ■Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF]
 ●To restore →  Turn on the camera again. ●Cannot be used in the following cases: 
When using the AC adaptor (supplied), when connected to computer/printer, during 
motion...

VQT4P14
Basics
Using the [Setup] menu
- 50 -
 • For the setting procedures of the menu. (→42)
[No.Reset]
Reset picture file numbers. 
 ●The folder number is updated and the file number starts from 0001.  ●A folder number between 100 and 999 can be assigned. 
Numbers cannot be reset once folder number reaches 999. In this case, save all 
necessary pictures to your computer, and format the built-in memory/card  (→53).
 ●To reset folder number to 100: 
First, format the built-in memory or card, and reset...