Panasonic Digital Camera Dmc Zs10 Owners Manual For Advanced Features

							120   VQT3G90VQT3G90   121
Viewing on TV screen (Continued) 
Keep the recorded still pictures and 
motion pictures
The methods for copying still and motion pictures recorded with this cam\
era to other 
devices vary according to the file format (JPEG, MPO, AVCHD, Motion JPEG). Follow the 
correct method for your device. 
Copy by inserting the SD card into the recorder
Available file types: Still picture JPEG/ Motion picture AVCHD
It is possible to copy onto Blu-ray disc, DVD disc, or hard disk by inse\
rting an SD card 
with still pictures and motion pictures recorded by this unit into a Pan\
asonic Blu-ray Disc 
Recorder or DVD Recorder.
Check the latest information about the equipment that can copy directly \
by inserting the SD card 
recorded by this unit, and equipment that is compatible with high defini\
tion (AVCHD) on the following 
website.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
 • See the instruction manual for the recorder for the details of copying a\
nd  playing back.
 • Note that the equipment described may not be available in certain 
countries and regions.
323232
Dubbing playback pictures via AV cables
Available file types:  Motion picture AVCHD, Motion JPEG
Videos that are played on this camera can be dubbed to media such as a DV\
D disc, hard 
disk or video tape using a device such as a DVD recorder or video record\
er. This method 
is useful as it allows dubbing to be performed even with devices that ar\
e not compatible 
with high definition (AVCHD) images. Picture quality will be reduced from high definition 
to standard definition.
Connect camera to recorder
To recorder’s input socket
AV cable
(always use cable 
supplied)
Start playback on camera
Start recording on recorder
 • To stop recording (dubbing), stop the recording 
on your recorder first before stopping the 
playback on the camera.
 
●Do not use any other AV cables except the supplied one. 
●When using a TV with a 4:3 aspect ratio, always change the camera’s [TV Aspect] 
setting (→47) to [4:3] before dubbing. Motion pictures copied in the [16:9] setti\
ng will 
appear vertically stretched when viewed on a 4:3 TV screen.
 
●For details on dubbing and playback methods, refer to your recorder’s operating 
instructions.
Preparation: Set [3D Playback] to [3D] (→47).
Connect the camera to a 3D-capable TV by use of an HDMI 
mini cable (optional) to display the playback screen 
(→117)
Display still pictures recorded in 3D
[3D] appears on the thumbnail of the 3D still pictures.
 
■To select and play back only still pictures recorded in 3D
Select [3D Play] in [Filtering Play] of the Playback Mode ( →104)
 
■To perform Slide Show playback of only still pictures recorded in 3D
Select [3D Play] in [Slide Show] of the Playback Mode ( →102)
If you experience any ill effects, such as tiredness or sickness while viewing 3D-recorded 
still pictures, switch the playback type to 2D.
 
■The functions that are not operational or available for 3D still picture\
s:
 • Playback Zoom ∗
 • Delete ∗
 • [Title Edit], [Text Stamp], [Resize] and [Cropping] in the [Playback] menu
∗
 These functions are available when a picture is displayed in 2D.
 
●On the LCD monitor of this camera, 3D still pictures will be played back\
 in 2D 
(conventional pictures).
 
●If you switch between 3D still pictures and normal still pictures while \
playing back 
pictures, a black screen will be displayed for a few seconds.
 
●If you select a thumbnail of 3D still pictures or display a thumbnail af\
ter playing back 3D 
still pictures, it may take a few seconds to start playing back or displ\
aying the pictures.
 
●Viewing 3D still pictures too close to a TV may cause eyestrain. 
●When a TV has not been converted for viewing 3D still pictures, do necessary 
preparation on the TV. (For details about the necessary preparation of the TV, read the 
manual for the TV.) 
						

							122   VQT3G90VQT3G90   123
Keep the recorded still pictures and 
motion pictures
 (Continued)  Using with your PC
Use “PHOTOfunSTUDIO” to copy to your computer 
Available file types: Still picture JPEG, MPO/ Motion picture AVCHD, Motion JPEG
With the “PHOTOfunSTUDIO” software on the supplied CD-ROM, a computer can be 
used to manage the recorded pictures.
Install “PHOTOfunSTUDIO” to your computer
Connect the camera to your computer
 • For connection procedures (→123)
Use “PHOTOfunSTUDIO” to copy pictures to your computer
 • For details on how to use “PHOTOfunSTUDIO”, see the “PHOTOfunSTUDIO” 
manual (PDF). 
Files and folders containing copied AVCHD motion pictures cannot be played back or 
edited if they have been deleted, modified, or moved using Windows Explo\
rer or similar 
methods. Always use “PHOTOfunSTUDIO” when handling AVCHD motion pictures.
Keeping the 3D still pictures
 
■Copying to your computer
Use “PHOTOfunSTUDIO” to copy to your computer. Still/motion pictures can be copied from the camera to your computer by \
connecting the 
two together.
 • Some computers can read directly from the camera’s memory card. For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards a message will be di\
splayed  requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following suppor\
t website.
http://panasonic.net/avc/sdcard/information/SDXC.html
 
■Computer specifications
Windows Macintosh
98/98SE Me/2000 XP/Vista/7 OS 9/OS X
Can I use 
“PHOTOfunSTUDIO”? No
Y

es∗
1No
Can I copy AVCHD motion 
pictures to my computer? No
Yes∗
2No
Can I copy still pictures 
and Motion JPEG motion 
pictures from my camera 
to my computer via USB 
connection cable? No
Yes Ye s
OS 9.2.2
OS X (10.1 - 10.6)
 • USB connection cables cannot be used with Windows 98/98SE, Mac OS 8.x, o\
r older  versions of either, but still/motion pictures may still be copied with compatible SD 
memory card reader/writers.
∗
1 Internet Explorer 6.0 or above must be installed.
Correct playback and operation depends on your computer’s environment and cannot 
always be guaranteed.
∗
2 Always use “PHOTOfunSTUDIO” when copying AVCHD motion pictures. 
						

							122   VQT3G90VQT3G90   123
Keep the recorded still pictures and 
motion pictures
 (Continued)  Using with your PC
Use “PHOTOfunSTUDIO” to copy to your computer 
Available file types: Still picture JPEG, MPO/ Motion picture AVCHD, Motion JPEG
With the “PHOTOfunSTUDIO” software on the supplied CD-ROM, a computer can be 
used to manage the recorded pictures.
Install “PHOTOfunSTUDIO” to your computer
Connect the camera to your computer
 • For connection procedures (→123)
Use “PHOTOfunSTUDIO” to copy pictures to your computer
 • For details on how to use “PHOTOfunSTUDIO”, see the “PHOTOfunSTUDIO” 
manual (PDF). 
Files and folders containing copied AVCHD motion pictures cannot be played back or 
edited if they have been deleted, modified, or moved using Windows Explo\
rer or similar 
methods. Always use “PHOTOfunSTUDIO” when handling AVCHD motion pictures.
Keeping the 3D still pictures
 
■Copying to your computer
Use “PHOTOfunSTUDIO” to copy to your computer. Still/motion pictures can be copied from the camera to your computer by \
connecting the 
two together.
 • Some computers can read directly from the camera’s memory card. For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards a message will be di\
splayed  requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following suppor\
t website.
http://panasonic.net/avc/sdcard/information/SDXC.html
 
■Computer specifications
Windows Macintosh
98/98SE Me/2000 XP/Vista/7 OS 9/OS X
Can I use 
“PHOTOfunSTUDIO”? No
Y

es∗
1No
Can I copy AVCHD motion 
pictures to my computer? No
Yes∗
2No
Can I copy still pictures 
and Motion JPEG motion 
pictures from my camera 
to my computer via USB 
connection cable? No
Yes Ye s
OS 9.2.2
OS X (10.1 - 10.6)
 • USB connection cables cannot be used with Windows 98/98SE, Mac OS 8.x, o\
r older  versions of either, but still/motion pictures may still be copied with compatible SD 
memory card reader/writers.
∗
1 Internet Explorer 6.0 or above must be installed.
Correct playback and operation depends on your computer’s environment and cannot 
always be guaranteed.
∗
2 Always use “PHOTOfunSTUDIO” when copying AVCHD motion pictures. 
						

							124   VQT3G90VQT3G90   125
Using with your PC (Continued)
Connect camera to computer
 • Please make sure you use the supplied USB connection cable.Use of cables other than the supplied USB connection cable may cause 
malfunction.
Use cursor button on the camera to select [PC], and press 
[MENU/SET]
A message may be displayed on screen if [USB Mode] ( →46) is set to [PictBridge 
(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to [PC\
].
Operate with your computer
 
■To cancel connection
Click “Safely Remove Hardware”  in the Windows System Tray
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] ( →46) is set to 
[PictBridge (PTP)].  • Only picture output can be performed.
 • It may not be possible to import if there are 1000 or more pictures on t\
he card.
 • AVCHD motion pictures cannot be read.
Getting Ready:
 • Charge the battery sufficiently. Or, connect the 
AC adaptor (optional) and DC 
coupler (optional).
 • When importing pictures from  the built-in memory, remove 
any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)  • Do not disconnect the USB connection 
cable while [Access] is 
displayed. USB connection cable
(always use cable supplied)
 Copying still pictures and motion pictures 
∗1 New folders are created in the following cases:
 • When pictures are taken to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.).
 • When recording after performing [No.Reset].
∗
2   Note that pictures cannot be uploaded to image-sharing websites if the f\
iles in the 
AD_LUMIX folder are deleted. 
 
• Do not delete or modify folders or data in the AVCHD folder using Windows 
Explorer or other tools. The camera may be unable to play back the 
motion pictures correctly if any of these files are deleted or modified.\
 
For data management and editing of AVCHD motion pictures, use the 
“PHOTOfunSTUDIO” software on the supplied CD-ROM.
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 
■ Folder and file names on computer
 
●Do not use any other USB connection cables except the supplied one. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel communication via your computer immediately. Use a sufficiently charged 
battery or an AC adaptor (optional) and DC coupler (optional).
 
●Setting the [USB Mode] to [PC] removes the need to make the setting each\
 time the 
camera is connected to the computer.
 
●For more details, consult your computer operating manual.
DCIM (Still/motion pictures)
100_PANA  (Up to 999 pictures/folder)
P1000001.JPG
  :P1000999.JPG
101_PANA
  :                      ∗1999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX (Folder for Web uploading)
∗2
LUMIXUP.EXE (Uploading tool)
PRIVATE AVCHD (Motion pictures in AVCHD)
 
●Windows
Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
●Macintosh
Drives are displayed on 
the desktop.
(Displayed as “LUMIX”, 
“NO_NAME”, or 
“Untitled”.)
JPG: 
Still pictures
MOV: 
Motion pictures
MPO: 
3D still pictures 
						

							124   VQT3G90VQT3G90   125
Using with your PC (Continued)
Connect camera to computer
 • Please make sure you use the supplied USB connection cable.Use of cables other than the supplied USB connection cable may cause 
malfunction.
Use cursor button on the camera to select [PC], and press 
[MENU/SET]
A message may be displayed on screen if [USB Mode] ( →46) is set to [PictBridge 
(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to [PC\
].
Operate with your computer
 
■To cancel connection
Click “Safely Remove Hardware”  in the Windows System Tray
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] ( →46) is set to 
[PictBridge (PTP)].  • Only picture output can be performed.
 • It may not be possible to import if there are 1000 or more pictures on t\
he card.
 • AVCHD motion pictures cannot be read.
Getting Ready:
 • Charge the battery sufficiently. Or, connect the 
AC adaptor (optional) and DC 
coupler (optional).
 • When importing pictures from  the built-in memory, remove 
any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)  • Do not disconnect the USB connection 
cable while [Access] is 
displayed. USB connection cable
(always use cable supplied)
 Copying still pictures and motion pictures 
∗1 New folders are created in the following cases:
 • When pictures are taken to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.).
 • When recording after performing [No.Reset].
∗
2   Note that pictures cannot be uploaded to image-sharing websites if the f\
iles in the 
AD_LUMIX folder are deleted. 
 
• Do not delete or modify folders or data in the AVCHD folder using Windows 
Explorer or other tools. The camera may be unable to play back the 
motion pictures correctly if any of these files are deleted or modified.\
 
For data management and editing of AVCHD motion pictures, use the 
“PHOTOfunSTUDIO” software on the supplied CD-ROM.
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 
■ Folder and file names on computer
 
●Do not use any other USB connection cables except the supplied one. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel communication via your computer immediately. Use a sufficiently charged 
battery or an AC adaptor (optional) and DC coupler (optional).
 
●Setting the [USB Mode] to [PC] removes the need to make the setting each\
 time the 
camera is connected to the computer.
 
●For more details, consult your computer operating manual.
DCIM (Still/motion pictures)
100_PANA  (Up to 999 pictures/folder)
P1000001.JPG
  :P1000999.JPG
101_PANA
  :                      ∗1999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX (Folder for Web uploading)
∗2
LUMIXUP.EXE (Uploading tool)
PRIVATE AVCHD (Motion pictures in AVCHD)
 
●Windows
Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
●Macintosh
Drives are displayed on 
the desktop.
(Displayed as “LUMIX”, 
“NO_NAME”, or 
“Untitled”.)
JPG: 
Still pictures
MOV: 
Motion pictures
MPO: 
3D still pictures 
						

							126   VQT3G90VQT3G90   127
Using with your PC (Continued) 
Printing
You can connect directly to a 
PictBridge-compatible printer for 
printing.
Getting Ready: • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and 
DC coupler (optional). 
 • When copying pictures from the  built-in memory, remove any memory 
cards.
 • Adjust the print quality or other  settings on your printer, as needed.
Connect camera to printer 
 • Please make sure you use the supplied USB connection cable. Use of cable\
s other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge (PTP)], 
and press [MENU/SET]
 Use cursor button to select a picture to print and press 
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→129))
 
■To cancel print    Press [MENU/SET]
 
●Do not use any other USB connection cables except the supplied one. 
●Disconnect USB connection cable after printing. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel printing and disconnect USB connection cable. Use a sufficiently charged 
battery or an AC adaptor (optional) and DC coupler (optional).
 
●AVCHD motion pictures cannot be printed.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
 • Do not disconnect the USB connection cable 
when the cable disconnection icon 
 is displayed 
(may not be displayed with some printers).
USB connection cable
(always use cable supplied) Uploading pictures to image-sharing websites
Using the uploading tool ([LUMIX Image Uploader]), you can upload stil\
l pictures and 
motion pictures to image-sharing websites (Facebook or YouTube).
There is no need to copy pictures to your computer or install specialize\
d software. 
Uploading pictures from the camera is easy with a computer connected to \
a network, 
even when you are away from your regular computing environment. • This tool supports only computers that run on Windows XP, Windows Vista, and Windows 7.
(To view the manual for [LUMIX Image Uploader], use Internet Explorer.)
Getting ready:  • Use [Upload Set] to select the pictures for uploading ( →105)
 • Connect your computer to the Internet
 • Create an account for the applicable image-sharing website and prepare y\
our login  information
Double-click “LUMIXUP.EXE” to start it
 • If you have installed “PHOTOfunSTUDIO” from the CD-ROM (supplied), “Uploading tool ([LUMIX Image Uploader])” may start automaticall\
y. 
Select the upload destination
 
• Do the further steps in accordance with the instructions displayed on th\
e computer 
screen.
 
●Because YouTube and Facebook services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available services and 
screens are subject to change without notice. 
(This service is available as of December 1, 2010) 
 
●Do not upload pictures protected by copyright except when you are the co\
pyright holder 
or permission has been obtained from the corresponding copyright holder. 
 
●Pictures recorded using the GPS function are uploaded to image-sharing w\
ebsites with 
the recorded place-name information intact. Be sure to confirm that it i\
s okay to share 
the information before uploading. 
						

							126   VQT3G90VQT3G90   127
Using with your PC (Continued) 
Printing
You can connect directly to a 
PictBridge-compatible printer for 
printing.
Getting Ready: • Charge the battery sufficiently. Or, connect the AC adaptor (optional) and 
DC coupler (optional). 
 • When copying pictures from the  built-in memory, remove any memory 
cards.
 • Adjust the print quality or other  settings on your printer, as needed.
Connect camera to printer 
 • Please make sure you use the supplied USB connection cable. Use of cable\
s other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge (PTP)], 
and press [MENU/SET]
 Use cursor button to select a picture to print and press 
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→129))
 
■To cancel print    Press [MENU/SET]
 
●Do not use any other USB connection cables except the supplied one. 
●Disconnect USB connection cable after printing. 
●Turn off power before inserting or removing memory cards. 
●When the battery begins to run out during communication, a warning beep \
sounds. 
Cancel printing and disconnect USB connection cable. Use a sufficiently charged 
battery or an AC adaptor (optional) and DC coupler (optional).
 
●AVCHD motion pictures cannot be printed.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
 • Do not disconnect the USB connection cable 
when the cable disconnection icon 
 is displayed 
(may not be displayed with some printers).
USB connection cable
(always use cable supplied) Uploading pictures to image-sharing websites
Using the uploading tool ([LUMIX Image Uploader]), you can upload stil\
l pictures and 
motion pictures to image-sharing websites (Facebook or YouTube).
There is no need to copy pictures to your computer or install specialize\
d software. 
Uploading pictures from the camera is easy with a computer connected to \
a network, 
even when you are away from your regular computing environment. • This tool supports only computers that run on Windows XP, Windows Vista, and Windows 7.
(To view the manual for [LUMIX Image Uploader], use Internet Explorer.)
Getting ready:  • Use [Upload Set] to select the pictures for uploading ( →105)
 • Connect your computer to the Internet
 • Create an account for the applicable image-sharing website and prepare y\
our login  information
Double-click “LUMIXUP.EXE” to start it
 • If you have installed “PHOTOfunSTUDIO” from the CD-ROM (supplied), “Uploading tool ([LUMIX Image Uploader])” may start automaticall\
y. 
Select the upload destination
 
• Do the further steps in accordance with the instructions displayed on th\
e computer 
screen.
 
●Because YouTube and Facebook services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available services and 
screens are subject to change without notice. 
(This service is available as of December 1, 2010) 
 
●Do not upload pictures protected by copyright except when you are the co\
pyright holder 
or permission has been obtained from the corresponding copyright holder. 
 
●Pictures recorded using the GPS function are uploaded to image-sharing w\
ebsites with 
the recorded place-name information intact. Be sure to confirm that it i\
s okay to share 
the information before uploading. 
						

							128   VQT3G90VQT3G90   129
Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.Printing (Continued)
 Making print settings on the cameraPrinting multiple pictures
Use cursor button to select [Multi Print] in step  (→127)
Use cursor button to select item and press [MENU/SET]
 •[Multi Select]:          Scroll between pictures with cursor button select pictures 
to print with the [DISP.] button. (Press [DISP.] button again 
to release selection.)
                            
  Press [MENU/SET] when selection is complete.
 • [Select All]:            Print all pictures.
 • [Print Set (DPOF)]:   Print pictures selected in [Print Set].
 • [Favorite]:              Print pictures selected as [Favorite].
(displayed only when [Favorite] pictures are present and 
setting is set to [ON].)
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→129))
 
●Select [Yes] if print confirmation screen is displayed. 
●An orange ● displayed during printing indicates an error message.  
●Print may be divided into several times if printing a large amount of pi\
ctures.
(Remaining sheets display may differ from set number.)
Print with date and text
 
■
Printing date without [Text Stamp]
 
●Printing in store: Only recording date can be printed. Request date prin\
ting in store.
 • Making [Print Set] settings on the camera in advance allows settings for\
 numbers of copies and date printing to be designated before giving the card to the \
store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store  can accept this size.
 
●Using computer:  Print settings for recording date and text information can be made 
using the supplied CD-ROM “PHOTOfunSTUDIO”.
 
●Using printer:       Recording date can be printed by setting [Print Set] on the camera, 
or by setting [Print with Date] (→129) to [ON] when connecting to a 
printer compatible with date printing. (Make settings before selecting [Print start])
Use cursor button to select the item and press [MENU/
SET]
Item
Settings
[Print with 
Date] [ON]/[OFF]
[Num.of 
prints] Set number of pictures (up to 999 pictures)
[Paper Size] When 
 is selected, the printer settings take priority.
[Page 
Layout]
 (printer takes priority) /  (1 picture, no border) /  (1 picture, with border) /  (2 pictures) /  (4 pictures)
Use cursor button to select setting and press [MENU/SET]
 
●Items may not be displayed if incompatible with printer. 
●To arrange  “2 pictures” or  “4 pictures” in the same still picture, set the 
number of prints for the still picture to 2 or 4.
 
●To print to paper sizes/layouts not supported by this camera, set to  and make 
settings on the printer. (Consult your printer’s operating manual.)
 
●[Print with Date] and [Num.of prints] are not shown when you have select\
ed [Print 
Set] settings.
 
●Even with completed [Print Set] settings, dates may not be printed, depe\
nding on 
the shop or printer used.
 
●When setting [Print with Date] to [ON], check the date printing settings\
 on the 
printer (printer settings may be prioritized). 
						

							128   VQT3G90VQT3G90   129
Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.Printing (Continued)
 Making print settings on the cameraPrinting multiple pictures
Use cursor button to select [Multi Print] in step  (→127)
Use cursor button to select item and press [MENU/SET]
 •[Multi Select]:          Scroll between pictures with cursor button select pictures 
to print with the [DISP.] button. (Press [DISP.] button again 
to release selection.)
                            
  Press [MENU/SET] when selection is complete.
 • [Select All]:            Print all pictures.
 • [Print Set (DPOF)]:   Print pictures selected in [Print Set].
 • [Favorite]:              Print pictures selected as [Favorite].
(displayed only when [Favorite] pictures are present and 
setting is set to [ON].)
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→129))
 
●Select [Yes] if print confirmation screen is displayed. 
●An orange ● displayed during printing indicates an error message.  
●Print may be divided into several times if printing a large amount of pi\
ctures.
(Remaining sheets display may differ from set number.)
Print with date and text
 
■
Printing date without [Text Stamp]
 
●Printing in store: Only recording date can be printed. Request date prin\
ting in store.
 • Making [Print Set] settings on the camera in advance allows settings for\
 numbers of copies and date printing to be designated before giving the card to the \
store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store  can accept this size.
 
●Using computer:  Print settings for recording date and text information can be made 
using the supplied CD-ROM “PHOTOfunSTUDIO”.
 
●Using printer:       Recording date can be printed by setting [Print Set] on the camera, 
or by setting [Print with Date] (→129) to [ON] when connecting to a 
printer compatible with date printing. (Make settings before selecting [Print start])
Use cursor button to select the item and press [MENU/
SET]
Item
Settings
[Print with 
Date] [ON]/[OFF]
[Num.of 
prints] Set number of pictures (up to 999 pictures)
[Paper Size] When 
 is selected, the printer settings take priority.
[Page 
Layout]
 (printer takes priority) /  (1 picture, no border) /  (1 picture, with border) /  (2 pictures) /  (4 pictures)
Use cursor button to select setting and press [MENU/SET]
 
●Items may not be displayed if incompatible with printer. 
●To arrange  “2 pictures” or  “4 pictures” in the same still picture, set the 
number of prints for the still picture to 2 or 4.
 
●To print to paper sizes/layouts not supported by this camera, set to  and make 
settings on the printer. (Consult your printer’s operating manual.)
 
●[Print with Date] and [Num.of prints] are not shown when you have select\
ed [Print 
Set] settings.
 
●Even with completed [Print Set] settings, dates may not be printed, depe\
nding on 
the shop or printer used.
 
●When setting [Print with Date] to [ON], check the date printing settings\
 on the 
printer (printer settings may be prioritized). 
						

							130   VQT3G90VQT3G90   131
Press the [DISP.] button to change display. 
List of LCD monitor displays
 
■In recording 
■In playback
 • The order of priority for display is location name information, title, d\
estination, name ([Baby]/[Pet]), 
name ([Face Recog.]).
∗   [h], [m] and [s] indicate “hour”, “minute” and “second”\
.
Screens shown here are only examples. The actual display may vary.
1 Recording Mode ( →20)
2 Recording quality ( →97)
Picture Size (→85)
Quality (→86)
Flash (→52)
Optical Image Stabilizer ( →94)
Jitter alert (→22)
White Balance ( →87)
Color Mode ( →93)
Active mode (→98)
3 Battery capacity (→15)
4 Wind cut (→98)
Intelligent exposure ( →91)
Macro recording ( →54)
Burst Mode (→70)
Auto Bracket (→57)
5 GPS (→75)
6 Histogram (→44)
7 AF area (→23)
8 Self-timer Mode (→56)
Focus range
Zoom (→50) 9
Current date/time
World time (→83)
Name (→65, 73)
Age in years/months ( →65, 73)
Place name information ( →77)
Destination settings ( →82)
Travel elapsed days ( →82)
10 Touch zoom (→50)
11 Touch shutter (→24)
12 Exposure Compensation ( →57)
AF Tracking (→89)
AF Assist Lamp (→93)
Metering Mode ( →91)
ISO Sensitivity (→86)
Aperture value/Shutter speed ( →22, 58, 59)
13 Touch AF/AE function (→25)
14 Elapsed recording time ( →30)
XXhXXmXXs
∗
15LCD Mode ( →43)
16 Date Stamp (→95)
17 Focus (→23)
18 Save destination ( →14)
Recording state
19 Number of recordable pictures ( →15)
Available recording time ( →30)
RXXhXXmXXs
∗
1Playback Mode ( →102)
2 Protected picture (→114)
Favorites (→112)
Date/text stamped display ( →95, 108)
Color Mode ( →93)
Picture Size (→85)
Quality (→86)
3 Battery capacity (→15)
4 Picture number/Total pictures ( →32)
Elapsed playback time ( →33)
XXhXXmXXs
∗
5GPS (→75)
6 Print settings (→113)
7 Histogram (→44)
8 Burst group display ( →101)
9 Recording Mode ( →20)
Flash (→52)
White Balance ( →87)
Exposure Compensation ( →57)
ISO Sensitivity (→86)
Aperture value/Shutter speed ( →22, 58, 59)10
Current date/time
World time (→83)
Name (→65, 73)
Age in years/months ( →65, 73)
Place name information ( →77)
Destination settings ( →82)
Travel elapsed days ( →82)
Title (→106)
11 LCD Mode ( →43)
12 Motion picture recording time ( →33)
XXhXXmXXs
∗
13 Folder/File number ( →32, 125)
14 Recording quality ( →97)
Burst group (→101)
Cable disconnection warning icon ( →127)
12 3
4
5
6
7
8, 9
10
11
12
13
14 15
16 17 18 19 123
4
5
6
7
9
10 12 13
8
11 14