Home > Panasonic > Digital Camera > Panasonic Digital Camera Dmc Zr3 Operating Instructions For Advanced Features

Panasonic Digital Camera Dmc Zr3 Operating Instructions For Advanced Features

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Camera Dmc Zr3 Operating Instructions For Advanced Features online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							- 141 -
    Advanced (Playback)
    You can set protection for pictures you do not want to be deleted by mistake.
    Select [PROTECT] on the [PLAYBACK] Mode menu. (P22)
    Press [ ‚] to return to the menu screen.
    •Press [MENU/SET] to close the menu.
    ∫ Canceling all the [PROTECT] settings
    1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].
    3Press [MENU/SET] to close the menu.
    •If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
    Note
    •The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in 
    memory or the card is formatted.
    •Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
    Write-Protect switch is set to [LOCK].
      [PROTECT]
    Press  3/4  to select [SINGLE] or [MULTI] and then 
    press [MENU/SET].
    Select the picture, and then press 
    [MENU/SET].
    When [MULTI] has been selected
    •Repeat these steps for each picture.•The settings are canceled when [MENU/
    SET] is pressed again.
    [SINGLE] [MULTI]
    Press  2/1 to 
    select the picture. Press 
    3/4/ 2/1 
    to select the 
    pictures. 
    						
    							Advanced (Playback)
    - 142 -
    You can delete or change the information relating to Face Recognition for the selected 
    picture.
    Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P22)
    Note
    •Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
    categorized using Face Recognition in [CATEGORY PLAY].
    •You cannot edit the Face Recognition information of protected pictures.
      [FACE REC EDIT]
    Press  3/4  to select [REPLACE] or [DELETE] and 
    then press [MENU/SET].
    Press  2/1  to select the picture and then press 
    [MENU/SET].
    •You cannot select pictures for which Face Recognition 
    information has not been registered.
    Press  2/1  to select the person and then press 
    [MENU/SET].
    •[DELETE]  > step6.•You cannot select a person who has not been registered.
    Press  3/4 /2/ 1 to select the person to replace and 
    then press [MENU/SET].
    Press  3 to select [YES] and then press [MENU/
    SET].
    Press [ ‚] to return to the menu screen.
    •Press [MENU/SET] to close the menu. 
    						
    							- 143 -
    Advanced (Playback)
    You can copy data of pictures you have shot from the built-in memory onto a card, from a 
    card into the built-in memory or from a card into the dedicated clipboard folder.
    •
    When copying clipboard pictures onto a card, select [COPY] on the clipboard playback menu. 
    (P116)
    Select [COPY] on the [PLAYBACK] Mode menu. (P22)
    Press  3/4  to select the copy destination and then 
    press [MENU/SET].
    Press  2/1  to select the picture and then press [MENU/SET].
    Press  3 to select [YES], and then press [MENU/
    SET].
    •If you press [MENU/SET] while copying pictures, the copying will 
    stop halfway.
    •Do not turn the camera off at any point during the copying 
    process.
    Press [ ‚] to return to the menu screen.
    •Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the 
    screen automatically returns to the playback screen.
    Note
    •If you copy picture data from the built-in memory to a card which does not have sufficient free 
    space, the picture data will only be copied halfway. We recommend using a card which has 
    more free space than the built-in memory (about 40 MB).
    •If a picture exists with the same name (folder number/file number) as the picture to be copied in 
    the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
    If a picture exists with the same name (folder number/file number) as the picture to be copied in 
    the copy destination when [ ] is selected, that picture is not copied.  (P173)
    •It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
    (Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
    copy them if they were edited with a PC.)
    •[PRINT SET] or [PROTECT] settings will not be copied. Perform the settings again after 
    copying is finished.
    •Motion picture recorded in [AVCHD Lite] cannot be copied.
     [COPY]
    : All the picture data in the built-in memory are copied 
    onto the card at one time.  > step 4.
    : One picture at a time is copied from the card to the  built-in memory.  > step 
    3.
    : The images are copied from the card to the dedicated  clipboard folder (built-in memory) one at a time. 
    (Motion pictures cannot be copied.)  > step 
    3. 
    						
    							Connecting to other equipment
    - 144 -
    [PLAYBACK] Mode: ¸
    Connecting to other  equipmentPlaying Back Pictures on a TV Screen
    Preparations:
    Set the [TV ASPECT]. (P28)
    Turn this unit and the TV off.
    1 Yellow: to the video input socket
    2 White: to the audio input socket
    A Align the marks, and insert.
    B AV cable (supplied)
    •Check the directions of the connectors, and plug them straight in or unplug them straight out. 
    (Otherwise the connectors may be bent out of shape which may cause malfunction.)
    Connect the AV cable  B (supplied) to the video input and the audio 
    input sockets on the TV.
    Connect the AV cable to the [AV OUT] socket on the camera.
    Turn the TV on and select external input.
    Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
    to [ (].
    Note
    •Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or 
    the left and right of the pictures.
    •Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.
    Playing back pictures using the AV cable (supplied) 
    						
    							- 145 -
    Connecting to other equipment
    The recorded still pictures can be played back on a TV with an SD Memory Card slot.Note
    •
    Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures recorded with [AVCHD Lite] can be played back on Panasonic TVs (VIERA) 
    with the AVCHD logo mark. In all other cases, connect the camera to the TV using the AV cable 
    (supplied) and playback the motion picture.
    •SDHC memory cards and SDXC memory cards can only be played back on compatible 
    televisions.
    You can enjoy high quality pictures and motion pictures on the TV by connecting the 
    camera with the HDMI compatible high definition TV using HDMI mini cable (optional).
    Playing back pictures on a TV with an SD Memory Card slot
    Playing back on the TV with HDMI socket
    What is HDMI?
    HDMI is the interface for digital devices. When this unit is connected to a HDMI 
    compatible device, the image and audio can be output with a digital signal. If you 
    connect this unit to a HDMI compatible high definition TV and then play back the 
    recorded high definition images, you can enjoy them in high resolution with high quality 
    sound.
    If you connect this unit to a Panasonic TV compatible with VIERA Link, linked 
    operations (VIERA Link) are possible. (P148) 
    						
    							Connecting to other equipment
    - 146 -
    Preparations: Check the [HDMI MODE]. (P29)
    Turn this unit and the TV off.
    1 HDMI socket
    2 TV with HDMI socket
    3 HDMI mini (C type)
    A Align the marks, and insert.
    B HDMI mini cable (optional)
    •
    Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result 
    in malfunction if the connectors of the cable are bent out of shape or plugged in the wrong 
    direction.)
    Connect the HDMI mini cable B  (optional) to the HDMI input socket 
    on the TV.
    Connect the HDMI mini cable to the [HDMI] socket on the camera.
    Turn the TV on and switch to HDMI input.
    Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
    to [( ].
    •When [VIERA Link] (P29)  is set to [ON] and the camera is connected to a TV supporting 
    VIERA Link, input of the TV will be switched automatically and the playback screen will 
    be displayed  (P148).
    (Except for Clipboard Mode)
    HDMI IN 
    						
    							- 147 -
    Connecting to other equipment
    Note
    •Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left 
    and right of the pictures.
    •Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, 
    RP-CDHM30; optional).
    Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
    •During HDMI output, no picture is displayed on the LCD monitor.•Output from the HDMI mini cable has priority when both AV cable and HDMI mini cable are 
    connected.
    •HDMI output is not possible even if you connect the HDMI mini cable while the unit is 
    connected to the PC or the printer.
    •HDMI connection is disabled and connection with the USB connection cable will take priority 
    when you connect the USB connection cable while the HDMI mini cable is connected.
    •When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV.•Audio will be played back as monaural.•Following functions cannot be set in Playback Mode.
    [TITLE EDIT], [VIDEO DIVIDE], [TEXT STAMP], [RESIZE], [CROPPING], [LEVELING], 
    [FACE REC EDIT], [COPY], multiple selection etc. 
    						
    							Connecting to other equipment
    - 148 -
    Connect this unit to a Panasonic TV compatible with VIERA Link with 
    an HDMI mini cable (optional) (P145).
    Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
    to [ (].
    Operate with the remote control for the TV.
    Panasonic TV compatible with VIERA Link
    ¢ The shape of the remote control varies depending on the region. Operate following the TV 
    guide displayed on screen.
    Playback using VIERA Link (HDMI) (HDAVI Control™)
    What is the VIERA Link?
    •
    VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your remote control for the Panasonic TV for easy 
    operations when this unit has been connected to a VIERA Link compatible device using a 
    HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.)
    •VIERA Link is a unique Panasonic function built on a HDMI control function using the 
    standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with 
    HDMI CEC compatible devices made by other companies are not guaranteed. When using 
    devices made by other companies that are compatible with VIERA Link, refer to the 
    operating instructions for the respective devices.
    •This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest Panasonic 
    version and is also compatible with existing Panasonic VIERA Link devices. (As of 
    December 2009)
    Preparations: Set the [VIERA Link] to [ON].  (P29)
    1 [SUB MENU]
    2 [OK]
    3 [RETURN] 
    						
    							- 149 -
    Connecting to other equipment
    ∫Usable functions
    Operate with the remote control for the TV.
    Multi Playback This is displayed initially when using the VIERA Link.
    3 /4/ 2/1: Select the image.
    [OK]: Go to one screen display.
    Red button: Switch the types of data to play back.
    [SUB MENU]: Display the Playback Mode selection screen.
    •
    The type of data for playback changes in the order of [ALL] > [] > [] > [] > [ALL].•Either the [NORMAL PLAY], [SLIDE SHOW], [TRAVEL PLAY], 
    [CATEGORY PLAY], [CALENDAR] or the [FAVORITE PLAY] can 
    be selected in the Playback Mode selection screen.
    One screen display Select the image while in Multi Playback, and then press 
    [OK].
    2 /1: Go to previous/next image.
    3 : Display the recording information.
    4 : Return to Multi Playback.
    [OK]: Playback the motion picture (when motion  picture is selected).
    Playback the audio (when picture with audio 
    is selected).
    Red button: Start the Slide Show.
    [SUB MENU]: Go to Slide Show setting screen.
    •
    During Motion Picture Playback, use  2/1 for back/forward and 
    4 to stop playback.
    Slide show Press Red button during one screen display.
    2 /1: Go to previous/next image (when Slide Show 
    is paused/when motion picture is played 
    back).
    4 : Finish the Slide Show and return to one 
    screen display.
    [OK]: Pause.
    [SUB MENU]: Go to Slide Show setting screen.
    •
    To playback the audio of the motion pictures, set the [SOUND] in 
    the Slide Show setting screen to [AUTO] or [AUDIO].
    A Operation icon
    A
    A 
    						
    							Connecting to other equipment
    - 150 -
    Note
    •Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while 
    when the operation icons are displayed. Operation icons are displayed when one of the 
    following buttons is pressed while the operation icons are not displayed.
    –3/ 4/2/1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 
    or more HDMI input terminals on the TV.
    •When the [VIERA Link] (P29)  of this unit is set to [ON], operation using the button on this unit 
    will be limited.
    •VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV 
    for how to set etc.)
    •If you are not using VIERA Link, set [VIERA Link]  (P29)  to [OFF].
    ∫Other linked operations
    Turning the power off:
    If you use the remote control for the TV to turn off the power, the power on this unit also 
    turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
    Automatic input switching:
    •
    If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel 
    on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it 
    will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
    •Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In 
    this case, use the remote control for the TV to switch the input channel. (For details on how to 
    switch input, please read the operating instructions for the TV.)
    •If VIERA Link does not work properly, refer to page  181.
    Note
    •If you are unsure whether or not the TV you are using is compatible with VIERA Link, read the 
    operating instructions for the TV.
    •Available linked operations between this unit and a Panasonic TV is different depending on the 
    types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating 
    instructions of the TV for the operations that support the TV.
    •Operation is not possible with a cable that is not based on the HDMI standard.
    Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, 
    RP-CDHM30; optional).
    Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
    •VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to 
    the PC or the printer.
    •[HDMI MODE] (P29)  for this unit is determined automatically when the VIERA Link is operating.•The resolution may switch automatically when an [AVCHD Lite] motion picture that was 
    recorded with another camera is played back on this unit. The screen may turn black for a while 
    when that occurs, but it is not a malfunction. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Camera Dmc Zr3 Operating Instructions For Advanced Features