Panasonic Digital Camera Dmc Tz25 Operating Instructions For Advanced Features

- 121 -
Using with your PC
Uploading pictures to image-sharing websites
Using the uploading tool ([LUMIX Image Uploader]), you can upload still pictures and 
motion pictures to image-sharing websites (Facebook or YouTube).
There is no need to copy pictures to your computer or install specialised software. 
Uploading pictures from the camera is easy with a computer connected to a network, 
even when you are away from your regular computing environment.
 • This tool supports only computers that run on...

- 122 -
Printing
Getting Ready:
 • Charge the battery sufficiently
.  
 • When copying pictures from the built-in memory, remove any memory 
cards.
 • Adjust the print quality or other settings on your printer, as needed.
 • Turn on the camera and printer
Connect camera to printer 
 • Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge(PTP)], 
and press...

- 123 -
Printing
 ●Do not use any other USB connection cables except the supplied one. ●Disconnect USB connection cable after printing. ●Turn off power before inserting or removing memory cards. ●When the battery begins to run out during communication, a warning beep sounds. 
Cancel printing and disconnect USB connection cable. Use a sufficiently charged 
battery.
 ●Motion pictures cannot be printed.
Printing multiple pictures
Use cursor button to select [Multi Print] in step  (→122)
Use cursor button to...

- 124 -
Printing
Making print settings on the camera
(Make settings before selecting [Print start])
Use cursor button to select the item and press [MENU/SET]
ItemSettings
[Print with 
Date] [ON] / [OFF]
[Num.of 
prints] Set number of pictures (up to 999 pictures)
[Paper Size] When 
 is selected, the printer settings take priority.
[Page 
Layout]
 (printer takes priority) /  (1 picture, no border) /  (1 picture, with border) /  (2 pictures) /  (4 pictures)
Use cursor button to select setting and press...

- 125 -
Printing
Print with date and text
 ■Printing date without [Text Stamp]
 ●Printing in store: Only recording date can be printed. Request date printing in store. • Making [Print Set] settings on the camera in advance allows settings for numbers of copies and date printing to be designated before giving the card to the store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store can accept this size.
 ●Using computer:  Print settings for recording date and text...

- 126 -
List of LCD monitor displays
Screens shown here are only examples. The actual display may vary. • Press the [DISP.] button to change display.
 ■In recording
1Recording Mode (→20)
2 Recording quality (→92)
Backlight Compensation (→25)
Picture Size (→80)
Quality (→81)
Flash (→52)
Optical Image Stabiliser (→89)
Jitter alert (→22)
White Balance (→82)
Colour Mode (→88)
3 Battery capacity (→13)
4 Wind cut (→93)
Intelligent exposure (→86)
Macro recording (→54)
Burst Mode (→72)
Auto Bracket (→58)
5...

- 127 -
List of LCD monitor displays
 ■In playback
 • The displaying is performed in the following priority order: title, travel destination, name ([Baby] / [Pet]), and name ([Face Recog.]). 
When the number of days elapsed from day of departure is displayed, age in years/months is not 
displayed.
∗   [h], [m] and [s] indicate “hour”, “minute” and “second”.
1
Playback Mode (→95)
2 Protected picture (→108)
Favourites (→106)
Date/text stamped display (→90, 102)
Colour Mode (→88)
Auto Retouch (→98)...

- 128 -
Message displays
Meanings of and required responses to major messages displayed on LCD monitor.
[This memory card cannot be used]
 ●A MultiMediaCard was inserted.  → Not compatible with the camera. Use
 a compatible card.
[Some pictures cannot be deleted]     [This picture cannot be deleted]
 ●Non-DCF pictures (→32) cannot be deleted. →  Save needed data on a computer or other device, and then use [Format] on the camera. (→48)
[No additional selections can be made]
 ●The number of pictures that...

- 129 -
Message displays
[Memory Card Error]     [Memory card parameter error]
 ●Card is not of SD standard. ●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are 
supported.
[Read Error] / [Write Error]     [Please check the card]
 ●Data read has failed. → Check whether card has been inserted correctly (→15). ●Data write has failed. → Turn off power and remove card, before re-inserting and turning on power again.
 ●Card may possibly be damaged. ●Try with a different...

- 130 -
Q&A  Troubleshooting
Try checking these items (→130 - 136) first.
If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue. 
(Note that except for some items such as [Clock Set], all settings are returned to their 
values from the time of purchase.)
Battery, power
The charging lamp turns off before the battery is fully charged. ●Charging is being performed in a place with extremely high or low temperature.  →  Reconnect the USB connection cable (supplied) and retry...