Panasonic Digital Camera Dmc Tz1 Operating Instructions

							Menu Settings
81VQT0V40
∫About the menu screen items
 There are 3 menu screens (1/3, 2/3 and  3/3).
 You can switch menu screens from any 
menu item by rotating the zoom lever.
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
This is recommended when playing back 
pictures on a TV screen. You can skip 
unwanted pictures if [FAVORITE] (P82) has 
been set.
1 Press  34 to select [ALL] or [ ] 
and then press [MENU/SET].
 The screen shown in step 1 appears 
when [FAVORITE] is set to [ON]. When 
[FAVORITE] is set to [OFF], perform 
step 2 onwards.  If none of the pictures have [ ] 
displayed, you cannot select [ ] even 
if [FAVORITE] is set to [ON].
2 Press  3 to select [START] and 
then press [MENU/SET].
(Screen when [ALL] is selected)
 The cursor displayed during a slide 
show  A or while a slide show is paused 
B  or during [MANUAL] slide show  C is 
the same as  3/4/2 /1 .
 Press  3 to pause the slide show. Press 
3  again to cancel pause.
 Press  2/1  while paused to display the 
previous or next picture.
3 Press  4 to finish.
∫Setting the audio and duration
Select [DURATION] or [AUDIO] on the 
screen shown in step 2 and set.
 You can only select [MANUAL] when [ ] has been selected in step 1.
 Press  2/1  to display the previous or 
next picture when [MANUAL] is 
selected.
[SLIDE SHOW]
Playing back pictures in order for a 
fixed duration
[ALL] Displays all pictures.
[] Displays only those pictures 
that have been set as 
favorites (P82).
EXITMENUSELECT
PLA1/3
F
RSLIDE SHO
DPOF PRINTROON
OFF
EXITMENUSELECT
PLA2/3
A
RESIZE
ASPECT CONVTRIMMINGON
OFF
PR
EXITMENUSELECT
PLA3/3COPYFORMA
MENUSET
SETMENUSELECT
PLA1/3
F
R
DPOF PRINTROON
OFF
ALLSLIDE SHO
MENU
SET[DURATION] Can be set to [1SEC.], 
[2SEC.], [3SEC.], 
[5SEC.] or [MANUAL] 
(manual playback).
[AUDIO] If set to [ON], the audio 
of the pictures with audio 
is played back.
ALL SLIDE SHO
MENU
SET
SELECTSETMENUCANCEL
ST
AU1OFFDURA
VQT0V40ENG.book  81 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
82VQT0V40
 If you set [AUDIO] to [ON] and then play back a picture with audio, the next picture 
will be displayed after the audio has 
finished.
 You cannot play back motion pictures and  use power save in a slide show. (However, 
the setting for power save mode is fixed to 
[10MIN.] while pausing a slide show or 
playing back a manual slide show.)
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can do the following if a mark has been 
added to pictures and they have been set 
as favorites.
 Delete all the pictures not set as favorites.  ([ALL DELETE EXCEPT ]) (P35)
 Play back the pictures set as favorites only  as a slide show. (P81)
1 Press  4 to select [ON] and then 
press [MENU/SET].
 You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the 
favorites icon [ ] will not appear when 
[FAVORITE] is set to [OFF] even if it 
was previously set to [ON].
 You cannot select [CANCEL] if none of 
the pictures have [ ] displayed.
2 Press [MENU/SET] to close the 
menu.
3Press  21 to select the picture 
then press 3.
 Repeat the above procedure.
If  3 is pressed while the [ ] favorites 
icon  A is displayed, [ ] is cleared, and 
the favorites setting is canceled.
 You can set up to 999 pictures as  favor ites.
∫ Deleting all favorites
1 Select [CANCEL] on the screen shown in 
step 1 and then press [MENU/SET].
2 Press  3 to select [YES] and then press 
[MENU/SET].
3 Press [MENU/SET] to close the menu.
 When printing pictures at a photo printing 
store, [ALL DELETE EXCEPT ] (P35) is 
useful so only the pictures you want to be 
printed remain on the card.
 Use [LUMIX Simple Viewer] or  [PHOTOfunSTUDIO-viewer-] on the 
CD-ROM (supplied), to set, confirm or 
delete favorites. (For information about 
this, refer to the separate operating 
instructions for PC connection.)
 You may not be able to set pictures taken  with other equipment as favorites.
[FAVORITE]
Setting your favorite picturesMENUSET
SETMENUSELECT
PLA1/3
R
SLIDE SHO
DPOF PRINTROMENU
SET
ON
OFFON
OFFCANCEL
F
10:00  DEC.
1/3100
_
0001
VQT0V40ENG.book  82 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
83VQT0V40
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
This mode allows you to automatically 
display pictures vertically if they were 
recorded holding the camera vertically or 
rotate pictures manually in 90° steps.
∫Rotate display
(The picture is automatically rotated 
and displayed.)
1Press 4 to select [ON] and then 
press [MENU/SET].
 The pictures are displayed without 
being rotated when you select [OFF].
 Refer to P34 for information about how  to play back pictures.
2 Press [MENU/SET] to close the 
menu.
∫ Rotate
(The picture is rotated manually.)
1Press 2 1 to select the picture 
and then press  4.
 The [ROTATE] function is disabled 
when [ROTATE DISP.] is set to [OFF].
 Motion pictures and protected pictures  cannot be rotated.
2 Press  34 to select the direction 
to rotate the picture and then 
press [MENU/SET].
3 Press [MENU/SET] twice to close 
the menu.
∫ Example
When rotating clockwise ( )
Original
picture
 When [ROTATE DISP.] is set to [ON],  pictures recorded holding the camera 
vertically are played back vertically 
(rotated).
 If you take pictures when aiming the 
camera up or down, it may not be possible 
to display the pictures vertically. (P26)
 The picture may be slightly blurred when 
the camera is connected to the TV with 
the AV cable (supplied) and played back 
vertically.
 When you play back pictures on a PC,  they cannot be displayed in the rotated 
direction unless the OS or software is 
compatible with Exif. Exif is a file format 
for still pictures which allows recording 
information etc. to be added. It was 
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
MENUSET
PLA1/3
F
DPOF PRINTROON
OFFOFF
ON
MENU
SET
SLIDE SHO
R
SETMENUSELECT
EXIT
RO
SET
SELECT
MENU
100 _
00011/3
The picture rotates clockwise in 
steps of 90°.
The picture rotates 
counter-clockwise in steps of 90°.
MENU
SET
RO
SELECTSETMENUCANCEL
VQT0V40ENG.book  83 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
84VQT0V40
established by JEITA [Japan Electronics 
and Information Technology Industries 
Association].
 Rotated pictures are displayed without 
being rotated when they are played back 
in multi playback.
 It may not be possible to rotate pictures 
that have been recorded with other 
equipment.
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
DPOF (Digital Print Order Format) is a 
system that allows the user to select which 
pictures to print, how many copies of each 
picture to print and whether or not to print 
the recording date on the pictures when 
using a DPOF compatible photo printer or 
photo printing store. For details, ask at your 
photo printing store.
When you want to use a photo printing 
store to print pictures recorded on the 
built-in memory, copy them to a card (P90) 
and then set the DPOF setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/
white_e.htm
Press  34 to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
 You cannot select [CANCEL] if there 
are no prints that have been set in the 
DPOF print settings. ∫
Single setting
1Press  21 to select the picture 
to print and then press 3 4 to 
set the number of prints.
 The number of prints icon [ ] 
appears.
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to “0”.
2 Press [MENU/SET] twice to close 
the menu.
∫ Multi setting
1Press  21 to select the picture 
to print then press  34 to set 
the number of prints.
 The number of prints icon [ ] 
appears.
 Repeat the above procedure. (You  cannot set all the pictures at one time.)
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to “0”.
[DPOF PRINT]
Setting the picture to print and the 
number of prints
MENUSET
PLA1/3
F
RSLIDE SHO
RO
ON
OFF
MENU
SETSINGLEMUL
CANCELDPOF PRINTSETMENUSELECT
DADISPLA
1DPOF SET 
COUNT1SELECTEXITMENU
100 _
00011/3
DADISPLACOUNT1
7918
1112
DPOF SET MUL
10
SELECTEXITMENU
VQT0V40ENG.book  84 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
85VQT0V40
2Press [MENU/SET] twice to close 
the menu.
∫ To cancel all settings
1Press 3 to select [YES] and then 
press [MENU/SET].
2Press [MENU/SET] to close the 
menu.
 DPOF print settings on the built-in 
memory are canceled when a card is 
not inserted. DPOF print settings on the 
card are canceled when a card is 
inserted.
∫ To print the date
After setting the number of prints, set/
cancel printing with the recording date by 
pressing [DISPLAY].
 The date print icon [ ] appears.
 When you go to a photo printing store for  digital printing, be sure to order the 
printing of the date additionally if required.
 Depending on the photo printing store or  the printer, the date may not be printed 
even if you set to print the date. For further 
information, ask at your photo printing 
store or refer to the operating instructions 
for the printer.
 DPOF is an abbreviation of [Digital Print Order Format]. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
 DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge (P95). 
The date printing setting on the printer 
may take priority over the date printing 
setting on the camera. Check the date 
printing setting on the printer also. (P95)
 It is necessary to delete all previous  DPOF print information made on other 
equipment when setting DPOF print on 
the camera.
 If the file is not based on the DCF  standard, the DPOF print setting cannot 
be set. DCF is an abbreviation of [Design 
rule for Camera File system], stipulated by 
JEITA [Japan Electronics and Information 
Technology Industries Association].
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can set protection for pictures you do 
not want to be deleted by mistake.
Press  34 to select [SINGLE], 
[MULTI] or [CANCEL] and then 
press [MENU/SET].
CANCEL ALL DPOF
CANCEL ALL DPOF
PRINT SETTINGS?
SELECT
SET
NO
MENUMENU SETYES
DADISPLA
1DPOF SET 
COUNT1SELECTEXITMENU
100 _
00011/3DA
DA
[PROTECT]
Preventing accidental erasure of 
pictures
MENUSET
MENU
SETSETMENUSELECT
PLA2/3
A
RESIZE
TRIMMINGON
OFF
ASPECT CONV
MUL
SINGLE
CANCELPR
VQT0V40ENG.book  85 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
86VQT0V40
∫Single setting
1Press  21 to select the picture 
and then press  4 to set/cancel.
2Press [MENU/SET] twice to close 
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in 
“[DPOF PRINT] Setting the picture to print 
and the number of prints”. (P84 to 85)
 If you press [MENU/SET] while canceling  protection, the canceling will stop halfway.
 The protect setting may not be effective 
on other equipment.
 If you want to delete protected pictures,  cancel their protection.
 Even if you protect pictures in the built-in 
memory or a card, they will be deleted if 
the built-in memory or the card is 
formatted. (P91)
 Even if you do not protect pictures on an  SD Memory Card, they cannot be deleted 
when the card’s write protect switch  A is 
set to [LOCK].
 The following functions cannot be used  with protected pictures.
–[ROTATE]
– [AUDIO DUB.] Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can add the audio after taking a 
picture.
1
Press  21 to select the picture 
and then press 4 to start audio 
recording.
 The message [OVERWRITE AUDIO 
DATA?] screen appears when audio has 
already been recorded. Press  3 to 
select [YES] and then press [MENU/
SET] to start audio recording. (The 
original audio is overwritten.)
 Audio dubbing cannot be used with the  following pictures.
– Motion pictures
– Protected pictures
 Audio dubbing may not work properly 
on pictures recorded by other 
equipment.
2 Press  4 to stop recording.
 The audio recording stops 
automatically if  4 is not pressed after 
about 10 seconds.
3 Press [MENU/SET] twice to close 
the menu.
SET The protect icon [ ] appears.
CANCEL
The protect icon [ ] disappears.
SET/CANCEL
PR
SELECT
1/3100 _
0001
EXITMENU
2
[AUDIO DUB.] 
Adding audio after taking picturesMENUSET
AUDUB
STSELECTEXITMENU
100 _
00011/3
ST
AUDIODUB100 _
00011/3
VQT0V40ENG.book  86 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
87VQT0V40
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
This function is useful if you want to reduce 
the file size of a picture to attach it to an 
e-mail or upload it to a website.
1Press 2 1 to select the picture 
and then press  4.
 The following pictures cannot be 
resized.
 When the aspect ratio setting is [ ]. – Pictures recorded in [ ] (0.3M EZ)
 When the aspect ratio setting is 
[].
– Pictures recorded in [ ]  (2.5M EZ)
 When the aspect ratio setting is  [].
– Pictures recorded in [ ] (2M EZ)
 Motion pictures
 Pictures with audio
 Flip animation
 It may not be possible to resize pictures  recorded with other equipment.
2 Press  21 to select the size and 
then press  4.
 Sizes smaller than the recorded picture 
are displayed.  When the aspect ratio setting is [ ].
– [ ]/[ ]/[ ]/[ ]
 When the aspect ratio setting is  [].
–[ ]
 When the aspect ratio setting is  [].
–[ ]
 The message [DELETE ORIGINAL  PICTURE?] appears.
3 Press  34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. Resized pictures cannot 
be restored when they are overwritten.
 A resized picture is newly created when  you select [NO].
 If the original picture is protected, you  cannot overwrite it. Select [NO] and 
newly create a resized picture.
4 Press [MENU/SET] twice to close 
the menu.
[RESIZE]
Making the picture smallerMENUSET
RESIZE
EXITSET SELECTMENU
100 _
00011/3
RESIZE
EXITRESIZE SELECTMENU
100 _
00011/3
RESIZE
DELETE ORIGINAL
PICTURE?
NO
SELECTSETMENUCANCELMENU
SET
YES
VQT0V40ENG.book  87 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
88VQT0V40
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can enlarge and then clip the important 
part of the recorded picture.
1Press  21 to select the picture 
and then press  4.
 The following pictures cannot be 
trimmed.
– Motion pictures
– Pictures with audio
– Flip animation
 It may not be possible to trim pictures 
recorded with other equipment.
2 Enlarge or decrease the parts to 
be trimmed with the zoom lever.
3Press  3/4/2/1 to move the 
position of the part to be trimmed.
4 Press shutter button.
 The message [DELETE ORIGINAL 
PICTURE?] appears.
5 Press  34 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. The trimmed pictures 
cannot be restored when they are 
overwritten.
 A trimmed picture is newly created  when you select [NO].
 When the original picture is protected,  you cannot overwrite it. Select [NO] and 
newly create a trimmed picture.
6 Press [MENU/SET] twice to close 
the menu.
 Depending on the cut size, the picture size 
of the trimmed picture may become 
smaller than that of the original picture.
 The picture quality of the trimmed picture 
will deteriorate.
[TRIMMING]
Enlarging a picture and trimming itMENUSET
TRIMMING
EXITSELECTSETMENU
100 _
00011/3
ZOOMEXIT
TRIMMING
MENU
100 _
00011/3T
W
TRIM:SHUTTER ZOOMEXIT
TRIMMING
MENU
100 _
00011/3
DELETE ORIGINAL
PICTURE?
TRIMMING
NO
SELECTSETMENUCANCEL
YES
MENU
SET
VQT0V40ENG.book  88 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
89VQT0V40
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can convert pictures taken with a 
[ ] aspect ratio to a [ ] or a [ ] 
aspect ratio.
1Press 3/ 4 to select [ ] or 
[ ] and then press [MENU/
SET].
 Only pictures taken with a [ ] 
aspect ratio can be converted.
 You may not be able to convert pictures 
taken on other equipment.
2 Press  2/1 to select a picture and 
then press  4.
 If you select and set a picture with an 
aspect ratio other than [ ], the 
message [CANNOT BE SET ON THIS 
PICTURE] is displayed on the screen.
3 Press 2 1 to determine the 
horizontal position and press the 
shutter button to set.
 Use  3/4  to set the frame position for 
pictures rotated vertically.
 The message [DELETE ORIGINAL  PICTURE?] appears.
4 Press  3/4 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you  select [YES]. If you convert the aspect 
ratio of a picture and then overwrite it, 
you cannot restore it.
 A picture with the converted aspect ratio  is newly created when you select [NO].
 When the original picture is protected, you cannot overwrite it. Select [NO] and 
newly create a picture with the 
converted aspect ratio.
5 Press [MENU/SET] twice to close 
the menu.
 After converting the aspect ratio, the 
picture size may become larger than that 
of the original picture.
 The following pictures cannot be  converted.
– Pictures with audio
– Motion pictures
 Files that do not conform to the DCF  standard cannot be converted. DCF is an 
abbreviation of [Design rule for Camera 
File system], stipulated by JEITA [Japan 
Electronics and Information Technology 
Industries Association].
[ASPECT CONV.]
Changing the aspect ratio of a 16:9 
picture
MENUSET
MENU
SETSETMENUSELECT
PLA2/3
A
RESIZE
TRIMMING
PR
ASPECT CONV
EXITSELECT
ASPECTCONV
MENU
100 _
00011/3
SET
ADJUSTEXITMENU
DELETE ORIGINAL
PICTURE?
ASPECT CONV
MENU
SETSELECTSETMENUCANCEL
NOYES
VQT0V40ENG.book  89 ページ  ２００６年２月２７日　月曜日　午後１時１９分 
						

							Menu Settings
90VQT0V40
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P80)
You can copy recorded picture data from 
the built-in memory to a card or vice versa.
1Press  34 to select the copy 
destination and then press 
[MENU/SET].
:
All the picture data in the built-in 
memory are copied onto the card at 
one time.
(Perform step 3)
:
One picture at a time is copied from the 
card to the built-in memory.
(Perform step 2)
2 Press  21 to select the picture 
and then press  4.
 When you copy picture data from the 
built-in memory to the card, all the 
pictures are selected at one time so this 
screen does not appear.
3 Press  3 to select [YES] and then 
press [MENU/SET].
(The illustration shows the screen when 
pictures are copied from the built-in 
memory to a card.)
 The message [COPY THIS PICTURE 
TO BUILT-IN MEMORY?] appears when 
you copy pictures from the card to the 
built-in memory.
 If you press [MENU/SET] while copying  pictures from the built-in memory to the 
card, the copying will stop halfway.
 Do not turn the camera off or do any  other operations before copying is 
finished. The data on the built-in 
memory or the card may be damaged 
or lost.
4 Press [MENU/SET] several times 
to close the menu.
 If you copy picture data from the built-in 
memory to a card, the screen 
automatically returns to the playback 
screen when all the pictures are copied.
[COPY]
Copying the picture data
MENUSET
MENU
SET
PLA3/3
FORMACOPY
SETMENUSELECT
COPY
EXIT
SELECTSETMENU
100
_
00011/3
COPY
SELECT
SETMENUMENU SET
COPY PICTURES FR
BMEMOR
MEMOR
NOYES
VQT0V40ENG.book  90 ページ  ２００６年２月２７日　月曜日　午後１時１９分