Panasonic Digital Camera Dmc Tz1 Operating Instructions

Others
101VQT0V40
In Simple mode (P28):ENLARGE
:4qk6q/10 k15cm
:E-MAIL
7 Battery indication (P13)
8 Folder/File number (P93) Built-in memory/Card (P16)
9 Picture number/Total pictures
10 Cable disconnection warning icon (P97)  This is displayed when printing using a printer supporting PictBridge. 　
(Depending on the printer, the icon 
may not be displayed.)
Motion picture recording time (P69):
11 Histogram (P38)
12 Recording information
13 Favorites settings (P82)/Elapsed  playback time (P69):
14...

Others
102VQT0V40
Do not use the camera near radio 
transmitters or high-voltage lines.
 If you record near radio transmitters or high-voltage lines, the recorded pictures 
and sound may be adversely affected.
Always use the supplied cords and 
cables. If you use optional accessories, 
use the cords and the cables supplied 
with them.
Do not extend the cords or the cables.
Do not spray the camera with 
insecticides or volatile chemicals.
 If the camera is sprayed with such  chemicals, the body of the...

Others
103VQT0V40
Bring charged spare batteries when 
going out.
 Be aware that the operating time of the battery becomes shorter in low 
temperature conditions such as at a ski 
resort.
 When you travel, do not forget to bring the 
battery charger (supplied) so that you can 
charge the battery in the country that you 
are travelling in.
Dispose of unusable battery.
 The battery has a limited life.
 Do not throw the battery into fire because  it may cause an explosion.
 The unusable battery should...

Others
104VQT0V40
[NOT ENOUGH SPACE ON BUILT-IN 
MEMORY]/[NOT ENOUGH MEMORY IN 
THE CARD]
There is no space left on the built-in 
memory or the card.
 When you copy pictures from the built-in memory to the card (batch copy), the 
pictures are copied until the capacity of 
the card becomes full.
[SOME PICTURES CANNOT BE 
COPIED]/[COPY COULD NOT BE 
COMPLETED]
The following pictures cannot be copied.
 When a picture with the same name as  the picture to be copied exists in the copy 
destination.
 Files...

Others
105VQT0V40
[PICTURE IS DISPLAYED FOR 4:3 TV]/
[PICTURE IS DISPLAYED FOR 16:9 TV]
 The AV cable is connected to the camera. Press [MENU/SET] if you want to delete 
this message at once.
 Select [TV ASPECT] in the [SETUP]  menu to change the TV aspect. (P23)
 This message also appears when the  USB connection cable is connected to the 
camera only.
In this case, connect the other end of the 
USB connection cable to a PC or a printer. 
(P92, 95)Troubleshooting
If you return the menu settings to...

Others
106VQT0V40
∫Recording
1: The picture cannot be recorded.  Is the mode dial correctly set?
 Is there any memory remaining on the 
built-in memory or the card?
– Before recording, delete some  pictures. (P35)
2: The recorded picture is whitish. The lens is dirty.
 The picture can become whitish if there is dirt e.g. fingerprints on the lens. If the 
lens is dirty, turn the camera off, retract 
the lens barrel (P10) and gently wipe 
the lens surface with a soft dry cloth.
3: The recorded picture...

Others
107VQT0V40
2: The LCD monitor becomes darker or brighter for a moment.
 This phenomenon appears when you press the shutter button halfway to set 
the aperture value and does not affect 
the recorded pictures.
3: The LCD monitor flickers indoors.  The LCD monitor may flicker for a few seconds after turning the camera on 
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or dark.  Adjust the brightness of the screen. (P20)
 Is the power LCD function or...

Others
108VQT0V40
3: The folder number and the file number are displayed as [—] and the screen 
turns black.
 Is the picture edited with a PC or 
recorded with a digital camera from 
another manufacturer?
This may also happen if the battery is 
removed immediately after recording or   
if recording with a exhausted battery.
– Format the data to delete the pictures  mentioned above. (P91) (Formatting 
irretrievably deletes all data including 
the other pictures. Check the data 
carefully before...

Others
109VQT0V40
7: The ends of the pictures are cut at printing.
 When using a printer with a trimming or borderless printing function, cancel this 
function before printing. (For details, 
refer to the operating instructions for the 
printer.)
 When you order photo studios to print  pictures, ask the photo studio if the 
pictures can be printed with both ends.
8: The picture is not displayed fully on  the TV.
 Set the aspect of the TV on the camera. (P23)
∫ Others
1: An unreadable language was...

Others
110VQT0V40
10:Colors appear on the picture which were not found in the actual scene. 
 Depending on the zoom magnification, the picture may have some colored 
fringes around the subject. This is 
called chromatic aberration and may be 
more visible when recording distant 
subjects. However this is not a 
malfunction.
11: The file numbers are not recorded  consecutively. 
 When you perform an operation after 
taking a certain action, the pictures 
may be recorded in folders with 
different...