Panasonic Digital Camera Dmc Ts6 Owners Manual Advanced Features

- 51 -
Basic
•Press 3 if you are using Summer Time [ ]. (The time will move forward by 1 hour.) Press  3 
once more to return to the normal time.
•If you cannot find the travel destination in the areas displayed on the screen, set by the time 
difference from the home area.
•When the [Auto Clock Set] is set to [ON], you can change Summer Time setting in [Destination] only.
 [World Time]
Set the time in your home area and travel destination.
You can display the local times at the travel destinations and...

- 52 -
Basic
•The number of days that have passed since the departure date can be printed out using the 
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. If you 
set [World Time] to the travel destination, the travel date is calculated using the date in the clock 
setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.•The number of days...

- 53 -
Basic
•When you connect the camera to a TV, the volume of the TV speakers does not change. Also, when 
connected, no sound is output from the camera speakers.
•Some subjects may appear differently from actuality on the LCD monitor. However, this does not 
affect the recorded pictures.
 [Airplane Mode]
Restricts GPS/Sensor/Wi-Fi/NFC settings.
[ON]:
Wi-Fi and NFC functions cannot be used.
Furthermore, when this unit is turned off, GPS positioning and 
compass/altimeter/barometer do not work.
[OFF]...

- 54 -
Basic
•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may 
appear different from real life on the LCD monitor. However, this does not affect the recorded 
pictures.
•The LCD monitor automatically returns to normal brightness if no operations are preformed for 
30 seconds when recording in [Power Monitor]. Press any button to make the LCD monitor bright 
again.
•When [Monitor Luminance] is set, the usage time is reduced.
•When you align the subject on the...

- 55 -
Basic
•When the recorded picture and the histogram do not match each other under the following 
conditions, the histogram is displayed in orange.
–When the Manual Exposure Assistance is other than [n0 EV] during exposure compensation or in 
the Manual Exposure Mode
–When the flash is activated
–When the brightness of the screen is not correctly displayed in dark places–When the exposure is not adequately adjusted•The Histogram is an approximation in Recording Mode.
•The Histogram of a picture may...

- 56 -
Basic
•Maximum illuminating range of the LED light is 50 cm (1.6 feet).•The life of battery will decrease when the LED light is turned on constantly.•In locations where the use of light is prohibited, set to [ ].
•It is fixed to [ ] in the following cases.–Advanced Underwater Mode–Panorama Shot Mode
–[Baby1]/[Baby2]/[3D Photo Mode] (Scene Mode)•It is not available in Playback Mode.
 [LED Light]
This will illuminate the subject with a lamp when taking motion pictures 
in dark surrounding.
Also, the...

- 57 -
Basic
•[Auto Power Off]  is set to [5MIN.] in the Intelligent Auto Mode.•[Auto Power Off] does not work in the following cases.–When using the AC adaptor
–When connecting to a PC or a printer–When recording or playing back motion pictures–During a Slide Show
–When using [Time Lapse Shot]•The effect of the [Monitor Power Save] is lower in the Digital Zoom range compared to the Optical 
Zoom range.
•[Monitor Luminance] settings take priority, even if [Monitor Power Save] has been set.
q [Economy]...

- 58 -
Basic
•[Auto Review] is activated regardless of its setting in the following cases.
–When using Auto Bracket–When using [Burst]•The Auto Review function is fixed to [2 SEC] in the following case.
–Intelligent Auto Mode•[Auto Review] does not work in the following cases.
–When using [Time Lapse Shot]–When recording motion pictures.
•The folder number is updated and the file number starts from 0001.•A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number...

- 59 -
Basic
•Always reset the camera when disposing or selling it to prevent personal information saved within 
the camera from being misused.
•Always reset the camera after making a copy of personal information when sending the camera in to 
be repaired.
¢ (Excluding [LUMIX CLUB] ) (P209)
 
[Reset Wi-Fi Settings]Reset all settings in the [Wi-Fi] menu to factory default settings.¢
x  [USB Mode]
Select the USB communication system after or before connecting the 
camera to your PC or your printer with the...

- 60 -
Basic
•This will work when the HDMI micro cable (optional) is connected.
•Refer to P215 for details.
•This will work when the HDMI micro cable (optional) is connected.•Refer to P217 for the method to play back 3D pictures in 3D.
•Refer to P42 for information about how to play back pictures.•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the 
OS or software is compatible with Exif. Exif is a  file format for still pictures which allows recording...