Panasonic Digital Camera Dmc Ts5 Owners Manual For Advanced Features

- 211 -
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P48.
Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)
2Press  3/4  to select item, and press [MENU/SET].
•
Refer to P206 for details.
•For details on how to enter characters, refer to “Entering Text” section on  P94.•If you are using the PC with standard...

- 212 -
Wi-Fi
•For details on how to enter characters, refer to “Entering Text” section on P94.•Make a copy of password. If you forget the password, you can reset it with [Reset Wi-Fi Settings] in 
the [Setup] menu, however other settings will also be reset. (excluding [LUMIX CLUB] )
•A “MAC Address” is a unique address that is used to identify network equipment.•“IP address” refers to a number that identifies a PC connected to a network such as the Internet. 
Usually, the addresses for homes are...

- 213 -
Connecting to other equipment
Playing Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
Confirm the terminals on your TV and use a cable compatible with the terminals. Image 
quality may vary with the connected terminals.
1High quality
2 HDMI 
socket3Video socket
1Connect the camera and a TV.
•Check the direction of the terminals and plug in/out straight holding onto the plug. (It may 
result in malfunction by the deforming of the terminal if it is...

- 214 -
Connecting to other equipment
2Turn on the TV and select the input to match the terminal in use.
3Turn the camera on and then press [(].
•Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the left 
and right of the pictures.
•Change the screen mode on your TV if the pictur e is displayed with the top or bottom cut off.•Output from the HDMI micro cable has priority when both AV cable and HDMI micro cable are 
connected.
•The connection with the USB connection...

- 215 -
Connecting to other equipment
1Connect this unit to a Panasonic TV compatible with VIERA Link with an 
HDMI micro cable (optional). (P213)
2Turn the camera on and then press [ (].
3Operate with the remote control for the TV.
•Operate with reference to the operation icons displayed on the screen.
•To play back the audio of the motion pictures, se t the [Sound] in the Slide Show setting screen to 
[AUTO] or [Audio].
•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if...

- 216 -
Connecting to other equipment
∫Other linked operations
Turning this unit off:
If you use the remote control for the TV to turn the TV off, this unit is also turned off.
Automatic input switching:
•
If you connect with an HDMI micro cable and then turn this unit on, and then press [ (], the input 
channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, 
it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting)....

- 217 -
Connecting to other equipment
Playing back 3D pictures
Connecting the camera to a 3D compatible television and playing back pictures taken in 3D 
allows you to enjoy 3D pictures for extra impact.
It is also possible to play back the recorded 3D pictures by inserting an SD card into the 3D 
compatible television with an SD card slot.
Connect the unit to a 3D compatible television using the HDMI micro cable and 
display the playback screen. (P213)
•When [VIERA Link]  (P60) is set to [ON] and the...

- 218 -
Connecting to other equipment
•When the picture is not appropriate to view in 3D (disparity is too large, etc.)–[Slide Show]: 
The picture will be played back in 2D.
–[Filtering Play]: 
Confirmation screen is displayed. Select whether or not to play back the picture in 3D.
•2 pictures may be displayed side by side when a 3D  picture is played back on a TV that is not 3D 
compatible.
•When a picture recorded in 3D is displayed on the LCD monitor of this unit, it is played back in 2D 
(conventional...

- 219 -
Connecting to other equipment
Saving still pictures and motion pictures on your 
PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message prompting you 
to format may appear. (Doing so will cause recorded images to be erased so do not choose to 
format.)
If the...

- 220 -
Connecting to other equipment
The supplied CD-ROM includes the following software.
Install the software on to your computer before use.
•
PHOTOfunSTUDIO 9.1 PE (Windows XP/Vista/7/8)
This software allows you to manage images. For example, you can send pictures and motion 
pictures to a PC and sort them by recording date or model name. You can also perform operations 
such as writing images to a DVD, processing and correcting images, and editing motion pictures.
•LoiLoScope 30 day full trial...