Panasonic Digital Camera Dmc Ts5 Basic Owners Manual

21(ENG) VQT4T99
Recording using the GPS function
∫About the “GPS”
Your Panasonic Lumix digital still camera is GPS-equipped which can automatically 
record the precise location coordinates of where the photo was taken. The specific 
physical address of this location can easily be derived from this information.
If you upload such “geotagged” photos to the Internet, a social networking site or any 
other electronic media, the precise location of where the photo was taken will remain 
embedded in the photo...

VQT4T99 (ENG)22
When [GPS Setting] is set to [ON], positioning is performed at regular intervals. When the 
positioning is successful, location name information and latitude/longitude are acquired.
Press [MENU/SET].
Press 3/4 /2 /1  to select [GPS/Sensor] menu, and then press 
[MENU/SET].
Press  3/4  to select [GPS Setting], and then press [MENU/SET].
Press  3/4  to select [ON], and then press [MENU/SET].
•
Exit the menu after it is set.
∫ About the Icon indicating positioning statusPositioning is...

23(ENG) VQT4T99
When the displayed location name information is different from the current location or 
when the positioning is not successful, move to a location where the radio waves from 
GPS satellites can be received better and perform the positioning update.
Press [MENU/SET].
Press 3/4 /2 /1  to select [GPS/Sensor] menu, and then press 
[MENU/SET].
Press 3/4 to select [Repositioning], and then press [MENU/SET].
•Positioning is started and the current location information is updated once the...

VQT4T99 (ENG)24
Sensors (compass/altimeter/barometer) 
are operated
The direction, altitude, and atmospheric pressure can be measured and recorded in the 
recorded images.
•Information measured on this unit is only a rough indication. Do not use it for 
technical purposes.
•When using this unit for full-scale mountain climbing, trekking, or underwater, use the 
measured information (direction, altitude, depth, atmospheric pressure) only as a 
rough indication, and always carry a map and purpose-built...

25(ENG) VQT4T99
Remote Shooting
You can remotely operate the camera using a smartphone/tablet.
You need to install “Panasonic Image App” (referred to as “ Image App ” from this point 
on )  on your smartphone/tablet.
The “ Image App ” is an application provided by Panasonic.
•The service may not be able to be used properly depending on the type of\
 smartphone/tablet 
being used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English...

VQT4T99 (ENG)26
Using the NFC “ Near Field Communication ” function, you can easily transfer data 
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
∫Controlling this camera remotely with a smartphone/tablet by using 
the NFC function
You can use the following functions by controlling this camera remotely with your 
smartphone/tablet.
–Remote recording (P30)–Playing back the pictures in the camera (P30)–Saving the pictures in the camera to the sm artphone/tablet, or sending...

27(ENG) VQT4T99
∫Transferring images in this camera to a smartphone/tablet one at a 
time by using the NFC function
You can transfer pictures in this camera to the smartphone/tablet. This function is useful 
when you want to transfer an image to the smartphone/tablet of your family or friend.
1Launch “ Image App ” on the smartphone/tablet at the transfer destination.
2Play back the picture you want to transfer to the 
smartphone/tablet in this camera.
3Touch the smartphone/tablet to [ ] of the...

VQT4T99 (ENG)28
Press [Wi-Fi].
Press 3/4 /2 /1  to select [New Connection], 
and then press [MENU/SET].
•
When connecting with the setting you used before, you can 
select the connection destination from [History Connection] 
or [Favorite Connection].
Press  3/4 to select [Remote Shooting], and 
then press [MENU/SET].
•
The information (SSID and password) required for directly 
connecting your smartphone/tablet to this unit is displayed.
•To change the connection method, press [DISP.], and 
then select...

29(ENG) VQT4T99
∫Changing the connection method
•When connecting with [Via Network]
(On the camera)
1Press  3/4 to select [Via Network], and then press [MENU/SET].2Select the method for connecting to a wireless access point, and set.
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.4Select the wireless access point you want to connect to, and set.5Start “ Image App ” on your smartphone/tablet. (P25)
•When connecting with [Wi-Fi Direct] or [WPS...

VQT4T99 (ENG)30
Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.•Motion pictures can also be recorded (excluding [FHD/60p/ ]/ [FHD/60p]).•Some settings are not available.•The screen differs depending on the operating system.
Select [ ] on a smartphone/tablet.
•
You can save pictures on the smartphone/tablet.•Motion pictures cannot be played back.•You can send pictures to a WEB service, etc.•The screen differs depending on the operating system.
Taking pictures via a...