Panasonic Digital Camera Dmc Ts25 Owners Maual For Advanced Features Manual

							- 151 -
Others
•Is it a picture that has been recorded with other equipment? In such cases, these pictures may be 
displayed with a deteriorated picture quality.
•This unit automatically adjusts the aperture during motion picture recording. At such times, the 
sound may break up. This is not a malfunction.
•Even if a compatible MP4 playback device is used, the video or sound quality of the recorded motion 
pictures may be poor, or they may not be able to be played. The recorded data may also not be 
displayed properly in certain cases.
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Depending on the TV model, the pictures may be elong ated horizontally or vertically or they may be 
displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the 
TV? > Connect the camera to the TV with the AV cable (optional) and then play back the pictures on 
the camera. (P120)
> Check [TV Aspect] setting.  (P49)
[Thumbnail is displayed] appears on the screen.
The sound of the recorded motion pictures sometimes breaks up.
Motion pictures recorded with this model cannot be played back on other equipment.
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s LCD monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV. 
						

							- 152 -
Others
•Is the camera connected to the PC correctly?
•Is the camera recognized by the PC correctly?> Select [PC] when connecting.  (P124)
> Turn this unit off and on.
> Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection cable 
to another USB terminal.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not format.
> If the [Access] displayed on the LCD monito r does not disappear, disconnect the USB 
connection cable after turning this unit off.
•Pictures cannot be printed using a printer that does not support PictBridge. > Select [PictBridge(PTP)] when connecting.  (P127)
> When using a printer with a Cropping or borderless printing function, cancel this function before 
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures,  ask the photo studio if the 16:9 pictures can be 
printed.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly. > Please use a printer that supports panorama pictures. (For details, please see the operating 
instructions of your printer)
> We recommend using the “ PHOTOfunSTUDIO ” software on the CD-ROM (supplied) to adjust 
the size of the still picture to the print paper size.
Cannot communicate with the PC.
The card is not recognized by the PC. (The built-in memory is recognized.)
The card is not recognized by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly. 
						

							- 153 -
Others
•Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P9.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then 
select the [ ~] icon to set the desired language.  (P50)
•AF Assist Lamp will turn on white in the dark place to assist the focusing.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]?  (P95)
•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance or 
quality of the camera.
•When the brightness changes due to zoom or camera movement, etc., the lens may click and the 
picture on the screen may drastically change. However, the picture is not affected. The sound is 
caused by the automatic adjustment of the aperture. This is not a malfunction.
•Have foreign objects become trapped?
> Remove the foreign objects.  (P10)
•When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or 
leaks.
> Release the lock.  (P20)
•If the camera is used in cold places such as ski resorts or places at high altitude with the snow or 
water droplets adhered to the camera, some parts of the camera may become hard to move with 
snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF] button. This 
is not a malfunction. When the camera returns to normal temperature it will function as normal.
•When using the camera in a place with sand or dust, some parts of the camera may become hard to 
move with foreign objects getting in the gap of the zoom button, or the camera [ON/OFF] button.
Wipe off with a dry, lint-free cloth or rinse with fresh water.
Others
[Requirements for Underwater use] is displayed repeatedly whenever this unit is 
turned on.
An unreadable language was selected by mistake.
A white lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The side door will not close.
A part of the camera such as the zoom button and side door does not move. 
						

							- 154 -
Others
•Below cases are not malfunctions, so you can use the camera as normal.> You hear a “rattling” sound when the camera is shaken while this unit is turned off or during 
Playback Mode (this is the sound of the lens moving).
> When this unit is turned on or off, or when switching from recording to Playback Mode, there is a 
rattling noise (this is the sound of the lens moving).
> When zooming, you can feel some vibration (this is caused by the lens moving).
•If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed, please reset the clock.  (P25)
•It is possible that the subject may be warped slightly, or the borders get colored, depending on the 
zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
•When using the Extended Optical zoom, the zooming action will stop temporarily. This is not a 
malfunction.
•Is the camera set to Macro Zoom Mode? (P58)
Maximum zoom during Macro Zoom Mode is 3 k digital zoom.
•When you perform an operation after taking a certain action, the pictures may be recorded in folders 
with different numbers from the ones used prior to the operation.
•If you insert or remove the battery before turning off this unit, the folder and file numbers for the 
pictures taken will not be stored in the memory. When this unit is turned on again and pictures are 
taken, they may be stored under file numbers which should have been assigned to previous 
pictures.
•Formatting is not available in Intelligent Auto Mode. Switch the recording mode to another one.  (P50)
The camera makes a rattling sound or you can feel some vibration.
The clock is reset.
When pictures are taken using the zoom, they are slightly distorted and the areas 
around the subject contain colors which are not actually present.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification.
The file numbers are not recorded consecutively.
The file numbers are recorded with previously used numbers.
The card cannot be formatted. 
						

							•SDXC Logo is a trademark of SD-3C, LLC.
•QuickTime and the QuickTime logo are trademarks or registered trademarks 
of Apple Inc., used under license therefrom.
•Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and 
other countries.
•SILKYPIX® is a registered trademark of Ichikawa Soft Laboratory.•Windows and Windows Vista are either  registered trademarks or trademarks 
of Microsoft Corporation in the United States and/or other countries.
•This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered 
trademark of DynaComware Taiwan Inc.
•Other names of systems and products mentioned in these instructions are usually the registered 
trademarks or trademarks of the manufacturers  who developed the system or product concerned.
This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC 
Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and 
non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. 
No license is granted or shall be implied for any  other use. Additional information may be obtained 
from MPEG LA, LLC. See http://www.mpegla.com
 .