Panasonic Digital Camera Dmc Ts2 Operating Instructions For Advanced Features

							- 31 -
Preparation
Setting the Menu
The camera comes with menus that allow you to choose the settings for taking pictures 
and playing them back as you like and menus that enable you to have more fun with the 
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s 
Clock and Power. Check the settings of this menu before proceeding to use the camera.
Note
•
Due to the camera’s specifications, it may not be possible to set some of the functions or some 
functions may not work in some of the conditions under which the camera is used.
!  [REC] Mode menu (P106  to 121 )[MODE] Playback Mode menu
 (P55 , 129  to133)
•This menu lets you 
set the Coloring, 
Sensitivity, Aspect 
Ratio, Number of 
pixels and other 
aspects of the 
pictures you are 
recording.•This menu lets you 
select the setting of 
the playback methods 
such as Playback or 
Slide Show of only the 
pictures set as 
[FAVORITE] .
 [MOTION PICTURE] Mode menu
 (P122 to  123)( [PLAYBACK] Mode menu  (P137 to 152 )
•This menu lets you 
set the [REC MODE], 
[REC QUALITY], and 
other aspects for 
Motion Picture 
Recording.•This menu lets you 
set the Protection, 
Cropping or Print 
Settings, etc. of 
recorded pictures.
 [SETUP] menu (P35  to 41)
•This menu lets you perform the Clock settings, select the operating 
Beep tone settings and set other settings which make it easier for you 
to operate the camera.
•The [SETUP] menu can be set from either the [REC] Mode or 
[PLAYBACK] Mode. 
						

							Preparation
- 32 -
This section describes how to select the Normal Picture Mode settings, and the same 
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Setting menu items
Press the [OFF/ON] button.
A [( ] button
B [MENU/SET] button
C Mode dial
Set the mode dial to  [ ·].
•To set the playback menu, proceed to step 3 by 
pressing the [ (].
Press [MENU/SET] to display the menu.
•You can switch menu screens from any menu item by 
pressing the zoom lever.
Press  3/4 to select [AF MODE].
•Select the item at the very bottom, and press  4 to 
move to the second screen.
Press  1.
•Depending on the item, its setting may not appear or it 
may be displayed in a different way.
Press 3/4 to select [ š]. 
						

							- 33 -
Preparation
Press [MENU/SET] to close the menu. Press [MENU/SET] to set.
Switching to other menus
e.g.: Switching to the [SETUP] menu
1Press [MENU/SET] to display the menu.
2Press 2.
3Press 4 to select the [SETUP] 
menu icon [ ].
4Press  1.
•Select a menu item next and set it. 
						

							Preparation
- 34 -
By using the Quick Menu, some of the menu settings can be easily found.
•Some of the menu items cannot be set by the Modes.
Using the quick menu
Press and hold [Q.MENU] when recording.
Press  3/4/2/ 1 to select the menu item and 
the setting and then press [MENU/SET] to 
close the menu.
A The items to be set and the settings are displayed.
A 
						

							- 35 -
Preparation
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their 
settings before using them.
•
In the Intelligent Auto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LANGUAGE] and 
[STABILIZER DEMO.] (P41) can be set.
For details on how to select the [SETUP] menu settings, refer to  P32.
•
Refer to P7  for details.
•Refer to P29  for details.
•Refer to P104 for details.
•Refer to P101 for details.
 [PRECAUTIONS]To maintain waterproof performance, display the Slide Show for 
the things you need to  check before use.
U [CLOCK SET]Setting the Date/Time.
 [WORLD TIME]
Set the time in your Home Area and Travel Destination.
“  [DESTINATION]:
Travel Destination Area
–  [HOME]:
Your Home Area
—  [TRAVEL DATE]
Set the departure date and the return date of your travels.
[TRAVEL SETUP]
[OFF]/[SET] [LOCATION]
[OFF]/[SET] 
						

							Preparation
- 36 -
•When you connect the camera to a TV, the volume of the TV speakers does not change.
•The brightness of the pictures displayed on the LCD monitor is increased so some subjects 
may appear different from real life on the LCD monitor. However, this does not affect the 
recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording 
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•If the screen is difficult to see because of bright light shining on it, use your hand or another 
object to block the light.
•The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.•[AUTO POWER LCD] cannot be selected in Playback Mode.
r  [BEEP]
This allows you to set the beep and shutter sound.
r [BEEP LEVEL]:
[s ] (Muted)
[t ] (Low)
[u ] (High)  [SHUTTER VOL.]:
[] (Muted)
[] (Low)
[] (High)
 [BEEP TONE]:
[]/[]/[]  [SHUTTER TONE]:
[]/[]/[]
u  [VOLUME]Adjust the volume of the speaker to any of 7 levels.
 [LCD MODE]
These menu settings make it easier to see the LCD monitor when 
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright 
it is around the camera.
…  [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when 
taking pictures outdoors.
 [DISPLAY SIZE]Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
123123
LCD 
						

							- 37 -
Preparation
•The [PATTERN]  setting is fixed to  [ ]  in the Intelligent Auto Mode and the Clipboard Mode.
•Motion picture recording frame display is only an approximation.•Recording frame display may disappear when zooming to Tele depending on the picture size 
setting.
•This cannot be used during Intelligent Auto Mode.
•[AUTO POWER OFF]  is set to  [5 MIN. ]  in the Intelligent Auto Mode and the Clipboard Mode.•[AUTO POWER OFF] does not work in the following cases.–When using the AC adaptor–When connecting to a PC or a printer–When recording or playing back motion pictures–During a Slide Show–[AUTO DEMO]•The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the 
Optical Zoom range.
•The effect of the [LCD POWER SAVE] will not affect the image being recorded.•Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the 
brightness of the LCD monitor.
 [GUIDE LINE]
Set the pattern of the guidelines displayed when taking pictures. 
You can also set whether or not to have the recording information 
displayed when the guidelines are displayed.  (P60)
[REC. INFO.]: 
[OFF]/[ON] [PATTERN]: 
[]/[ ]
 [HISTOGRAM]
This allows you to set either to display or not display the 
histogram. 
(P61)
[OFF]/[ON]
 [ REC AREA]Angle of view for motion picture recording can be checked.
[OFF]/[ON]
q  [ECONOMY]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
 [AUTO POWER OFF]:
The camera is automatically turned off if the camera has not been 
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
 [LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be 
conserved by lowering the image quality of the LCD monitor 
further during the recording
¢.¢ Excluding the Digital Zoom range.[OFF]/[ON]
&$0 &$0 
						

							Preparation
- 38 -
•The Auto Review function is activated regardless of its setting when using Auto Bracket (P71), 
[SELF PORTRAIT]  (P76), [HI-SPEED BURST]  (P82), [FLASH BURST]  (P83) and 
[PHOTO FRAME]  (P86) in Scene Mode, Burst Mode  (P117) and when recording still pictures 
with audio  (P120).
•In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].•[AUTO REVIEW] does not work when recording motion pictures.
•The folder number is updated and the file number starts from 0001.  (P165)•A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting 
the card (P41) after saving the data on a PC or elsewhere.
•To reset the folder number to 100, format the built-in memory or the card first and then use this 
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
•When the [RESET] setting is selected during recording, the operation that resets the lens is 
also performed at the same time. You will hear  the sound of the lens operating but this is 
normal and not indicative of malfunctioning.
•When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will also be 
reset.
•When [SETUP] menu settings are reset, the following settings are also reset. In addition, 
[ROTATE DISP.]  (P146) is set to [ON], and [FAVORITE]  (P147) is set to [OFF] in [PLAYBACK] 
Mode menu.
–The birthday and name settings for [BABY1]/[BABY2]  (P80) and [PET]  (P81) in Scene Mode–The settings of [TRAVEL DATE]  (P101) (departure date, return date, location)–The [WORLD TIME] (P104)  setting•The folder number and the Clock setting are not changed.
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one of the buttons is 
pressed.
v [NO.RESET]Reset the file number of the next recording to 0001.
w [RESET]The [REC] or [SETUP] menu settings are reset to the initial 
settings. 
						

							- 39 -
Preparation
•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication 
system.
•When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer 
Protocol)” communication system.
•This will work when the AV cable is connected.
x [USB MODE]
Select the USB communication system after or before connecting 
the camera to your PC or your printer with the USB connection 
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the 
camera to a PC or a printer supporting PictBridge.
{  [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z  [PC]:
Set after or before connecting to a PC.
 [TV ASPECT]
Set to match the type of TV.
(Playback Mode only)
[W ]: When connecting to a 16:9 screen TV.
[X ]: When connecting to a 4:3 screen TV. 
						

							Preparation
- 40 -
•Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/60 
seconds, where p= progressive scanning is a high density image signal that is scanning the 
screen with all the effective scanning lines every 1/60 seconds.
The [HDMI] terminal on this unit is compatible with high definition output [1080i]. It is necessary 
to have a compatible TV to enjoy progressive and high definition images.
•If the images are not output on the TV when the setting is [AUTO], match with the image format 
your TV can display, and select number of effective scanning lines. (Please read the operating 
instructions for the TV.)
•This will work when the HDMI mini cable (optional) is connected.•Refer to P155 for details.
•This will work when the HDMI mini cable (optional) is connected.•Refer to P157 for details.
[HDMI MODE]
Set the format for the HDMI output when playing back on the 
HDMI compatible high definition TV connected with this unit using 
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the 
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for 
output.
[720p]:
The progressive method with 720 available scan lines is used for 
output.
[480p]:
The progressive method with 480  available scan lines is used for 
output.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the 
VIERA by automatically coupling this unit with the VIERA Link 
compatible equipment using HDMI mini cable (optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link 
compatible equipment is enabled. (Not all operations 
are possible)
Button operation of the main unit will be limited.