Panasonic Digital Camera Dmc Ts1 Operating Instructions

							101VQT1Z45
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P102). (Only alphabetic characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in scene mode or [LOCATION] in travel date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P25)
Press 3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/ 2/1 to select text and then press 
[MENU/SET] to register.
•Press [DISPLAY] to switch text between [A] (capitals), [a] (small 
case) and [&/1] (special characters and numbers).
•The entry position cursor can be moved left and right with the 
zoom lever.
•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
•To stop editing at any time during text entry, press [ ‚].•A maximum of 30 characters can be entered.(Maximum of 9 characters when setting 
names in [FACE RECOG.])
Press  3/4/ 2/1 to move the cursor to [EXIT] and then press 
[MENU/SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
 [TITLE EDIT]
Select the picture, and then press 
[MENU/SET] to set.
•[ ’ ] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2/ 1 to 
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again.
VQT1Z45~_eng.book  101 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							VQT1Z45102
Advanced (Playback)
∫Delete the title 
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].2Press [ ‚].3Press [MENU/SET] to close the menu.
[MULTI] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].2Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.•The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in scene mode or 
[LOCATION] in travel date can also be  registered by using the operation in steps 4 and 
following.
•The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and 
[TITLE EDIT] cannot be registered at the same time.
•You can print out texts (comments) using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled 
software on the CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use title edit for the following pictures.–Motion pictures–Protected pictures–Pictures recorded with other equipment
You can stamp the recording date/time, age, trav el date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P25)
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
  [TEXT STAMP]
Select the picture, and then press 
[MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
•
The setting is canceled when [DISPLAY] 
is pressed again.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4/2 /1  to 
select the pictures.
VQT1Z45~_eng.book  102 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							103VQT1Z45
Advanced (Playback)
Press 3/4/ 2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P62)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in scene 
mode, [LOCATION] in travel date or [TITLE EDIT].
Press [MENU/SET].
•If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture 
size will become smaller as shown below.
•The picture becomes slightly rougher.
Press  3 to select [YES] and then press
 [MENU/SET].
•The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Press [ ‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
Note
•When you print pictures stamped with text, the dat e will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the [ ] pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures with audio–Pictures recorded without setting the clock and title–Pictures that were previously stamped with [TEXT STAMP]–Pictures recorded with other equipment
[W/O TIME] : Stamp the year, month and date.
[WITH TIME] : Stamp the year, month, day, hour and minutes.
Aspect ratio settingPicture size
X
 //> 
Y // > 
W // > 
VQT1Z45~_eng.book  103 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							VQT1Z45104
Advanced (Playback)
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P25)
Press 3 to select [YES] and then press 
[MENU/SET].
Press [‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
•Press [MENU/SET] to close the menu.
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•Motion pictures, pictures with audio, and pi ctures stamped with [TEXT STAMP] cannot be 
resized.
Q  [RESIZE] Reducing the picture size (number of pixels)
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting1Press  2/1  to select the picture, and 
then press [MENU/SET].
2Press  2/1  to select the size¢, and then 
press [MENU/SET].
¢ Only the sizes to which the pictures can be 
resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4  to select the size, and then 
press [MENU/SET].
•
When [DISPLAY] is pressed, an explanation 
of resizing is displayed.
2Press  3/4 /2/ 1 to select the picture, 
and then press [DISPLAY].
•
Repeat this step for each picture, and press 
[MENU/SET] to set.
[MULTI]
VQT1Z45~_eng.book  104 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							105VQT1Z45
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P25)
Press [MENU/SET].
Press 3 to select [YES] and then press 
[MENU/SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the trimmed picture may become smaller than 
that of the original picture.
•The picture quality of the trimmed picture will deteriorate.•It may not be possible to trim pictures recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT STAMP] cannot be 
trimmed.
  [TRIMMING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and press 
3/ 4/2/ 1 to select the parts 
to be trimmed.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3/ 4/2 /1 : Move Reduction Enlargement
()
Move the position
()
VQT1Z45~_eng.book  105 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							VQT1Z45106
Advanced (Playback)
Minute tilting of the image can be adjusted. 
Select [LEVELING] on the [PLAYBACK] mode menu. (P25)
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when leveling is performed. •Recorded pixels may decrease compared to original image when leveling is performed.•Leveling may not be performed on images recorded with other equipment.•Motion pictures, pictures with audio, and pictures stamped with [TEXT STAMP] cannot be levelled.
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P25)
Note
•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The display is not rotated during multi playback (P43) or [CALENDAR] (P100).•Pictures recorded with the camera upside down will not be displayed rotated.
  [LEVELING]
Press 2/ 1 to select the picture, and then press [MENU/SET].
Press 2/ 1 to adjust the tilting, and press 
[MENU/SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.
Press 3 to select [YES] and then press 
[MENU/SET].
M  [ROTATE DISP.]
Press 4 to select [ON] and then press [MENU/SET].
•The pictures are displayed without being rotated when you select 
[OFF].
•Refer to P42 for information about how to play back pictures.
Press [MENU/SET] to close the menu.
VQT1Z45~_eng.book  106 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							107VQT1Z45
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favorites. ([FAVORITE PLAY])•Play back the pictures set as favorites only as a slide show.•Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P25)
∫Canceling all the [FAVORITE] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set as a favorite.
Note
•You can set up to 999 pictures as favorites.•When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P45) is useful so 
only the pictures you want to be printed remain on the card.
•You may not be able to set pictures taken with other equipment as favorites.•You can perform, check and cancel the settings of images as favorites using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled software on the CD-ROM (supplied).
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing stor e to print pictures recorded on the built-in 
memory, copy them to a card (P111) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Ü  [FAVORITE]
Press  4 to select [ON] and then press [MENU/SET].
•You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press  2/1 to select the picture and then press  4.
•Repeat the above procedure.•If 4  is pressed again, the favorite setting is canceled.
 [PRINT SET]
VQT1Z45~_eng.book  107 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							VQT1Z45108
Advanced (Playback)
Select [PRINT SET] on the [PLAYBACK] mode menu. (P25)
Press 3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Canceling all the [PRINT SET] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
Note
•The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date pr int settings of the printer may take precedence 
so check if this is the case.
•It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
•If the file is not based on the DCF standard, the print setting cannot be set.
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/ 2/1 
to select the 
pictures.
VQT1Z45~_eng.book  108 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							109VQT1Z45
Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P25)
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on an SD  Memory Card or an SDHC Memory Card, they 
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P25)
P  [PROTECT]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
When [MULTI] has been selected
•Repeat these steps for each picture.•The settings are canceled when 
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4 /2 /1  
to select the 
pictures.
B  [AUDIO DUB.]
VQT1Z45~_eng.book  109 ページ  ２００９年１月２８日　水曜日　午後９時３０分 
						

							VQT1Z45110
Advanced (Playback)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures (When [REC MODE ] is set to [MOTION JPEG]) or pictures 
with audio recorded by this camera cannot be played back by older models of 
Panasonic digital camera (LUMIX) launched before July 2008.
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] Mode menu. (P25)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for 
[CATEGORY PLAY].
•Clearing of [FACE RECOG.] cannot be done of the protected image.
Press 2/ 1 to select the picture and then press 
[MENU/SET] to start audio recording.
•The message [OVERWRITE AUDIO DATA?] screen appears 
when audio has already been recorded. Press  3 to select [YES] 
and then press [MENU/SET] to start audio recording. (The 
original audio is overwritten.)
•Audio is recorded from the built-in microphone on the camera.•If you press [ ‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
•It will automatically stop after recording about 10 seconds without 
pressing [MENU/SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
 [FACE RECOG.]
Press 2/ 1 to select the picture and then press [MENU/SET]
Press 3 to select [YES] and then press 
[MENU/SET].
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
VQT1Z45~_eng.book  110 ページ  ２００９年１月２８日　水曜日　午後９時３０分