Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features
Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features
Here you can view all the pages of manual Panasonic Digital Camera Dmc Sz5 Owners Manual For Advanced Features . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
- 41 -
Basic
Setting the Menu
The camera comes with menus that allow you to choose the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [Setup] menu contains some important settings relating to the camera’s clock
and power. Check the settings of this menu before proceeding to use the camera.
Example: In the [Rec] menu, change [AF Mode] from [Ø] ([1-Area]) to [ š] ([Face Detection])...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-40.png "Page 41
- 41 -
Basic
Setting the Menu
The camera comes with menus that allow you to choose the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [Setup] menu contains some important settings relating to the camera’s clock
and power. Check the settings of this menu before proceeding to use the camera.
Example: In the [Rec] menu, change [AF Mode] from [Ø] ([1-Area]) to [ š] ([Face Detection])...")
- 41 - Basic Setting the Menu The camera comes with menus that allow you to choose the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [Setup] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera. Example: In the [Rec] menu, change [AF Mode] from [Ø] ([1-Area]) to [ š] ([Face Detection])...
Page 42
![Page 42
- 42 -
Basic
∫Close the menu
Press [ ] until the screen returns to the
recording/playback screen or press the shutter button
half-way.
Note
•
There are functions that cannot be set or used depending on
the modes or menu settings being used on the camera due to the specifications.
By using the Quick Menu, some of the menu settings can be easily found.
•The features that can be adjusted using Quick M enu are determined by the mode or a display style
the camera is in.
3Press 3/ 4 to select the menu item...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-41.png "Page 42
- 42 -
Basic
∫Close the menu
Press [ ] until the screen returns to the
recording/playback screen or press the shutter button
half-way.
Note
•
There are functions that cannot be set or used depending on
the modes or menu settings being used on the camera due to the specifications.
By using the Quick Menu, some of the menu settings can be easily found.
•The features that can be adjusted using Quick M enu are determined by the mode or a display style
the camera is in.
3Press 3/ 4 to select the menu item...")
- 42 - Basic ∫Close the menu Press [ ] until the screen returns to the recording/playback screen or press the shutter button half-way. Note • There are functions that cannot be set or used depending on the modes or menu settings being used on the camera due to the specifications. By using the Quick Menu, some of the menu settings can be easily found. •The features that can be adjusted using Quick M enu are determined by the mode or a display style the camera is in. 3Press 3/ 4 to select the menu item...
Page 43
![Page 43
- 43 -
Basic
About the Setup Menu
For details on how to select the [Setup] menu settings, refer to P41.
[Clock Set], [Auto Power Off] and [Auto Review] are important items. Check their settings
before using them.
•
Refer to P23 for details.
•Press 3 if you are using Summer Time [ ]. (The time will move forward by 1 hour.) Press 3
once more to return to the normal time.
•If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
U...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-42.png "Page 43
- 43 -
Basic
About the Setup Menu
For details on how to select the [Setup] menu settings, refer to P41.
[Clock Set], [Auto Power Off] and [Auto Review] are important items. Check their settings
before using them.
•
Refer to P23 for details.
•Press 3 if you are using Summer Time [ ]. (The time will move forward by 1 hour.) Press 3
once more to return to the normal time.
•If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
U...")
- 43 - Basic About the Setup Menu For details on how to select the [Setup] menu settings, refer to P41. [Clock Set], [Auto Power Off] and [Auto Review] are important items. Check their settings before using them. • Refer to P23 for details. •Press 3 if you are using Summer Time [ ]. (The time will move forward by 1 hour.) Press 3 once more to return to the normal time. •If you cannot find the travel destination in the areas displayed on the screen, set by the time difference from the home area. U...
Page 44
![Page 44
- 44 -
Basic
•The number of days that have passed since the departure date can be printed out using the
“ PHOTOfunSTUDIO ” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. If you
set [World Time] to the travel destination, the travel date is calculated using the date in the clock
setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.
•The number of...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-43.png "Page 44
- 44 -
Basic
•The number of days that have passed since the departure date can be printed out using the
“ PHOTOfunSTUDIO ” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. If you
set [World Time] to the travel destination, the travel date is calculated using the date in the clock
setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.
•The number of...")
- 44 - Basic •The number of days that have passed since the departure date can be printed out using the “ PHOTOfunSTUDIO ” bundled software on the CD-ROM (supplied). •The travel date is calculated using the date in the clock setting and the departure date you set. If you set [World Time] to the travel destination, the travel date is calculated using the date in the clock setting and the travel destination setting. •The travel date setting is memorized even if the camera is turned off. •The number of...
Page 45
![Page 45
- 45 -
Basic
•When you connect the camera to a TV, the volume of the TV speakers does not change. Also, when
connected, no sound is output from the camera speakers.
•Some subjects may appear differently from actuality on the LCD monitor. However, this does not
affect the recorded pictures.
•When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
r [Beep]
This allows you to set the beep and shutter sound.
r [Beep Level]: [Shutter Vol.]:
[t ]
[u ]
[s ]...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-44.png "Page 45
- 45 -
Basic
•When you connect the camera to a TV, the volume of the TV speakers does not change. Also, when
connected, no sound is output from the camera speakers.
•Some subjects may appear differently from actuality on the LCD monitor. However, this does not
affect the recorded pictures.
•When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
r [Beep]
This allows you to set the beep and shutter sound.
r [Beep Level]: [Shutter Vol.]:
[t ]
[u ]
[s ]...")
- 45 - Basic •When you connect the camera to a TV, the volume of the TV speakers does not change. Also, when connected, no sound is output from the camera speakers. •Some subjects may appear differently from actuality on the LCD monitor. However, this does not affect the recorded pictures. •When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be adjusted. r [Beep] This allows you to set the beep and shutter sound. r [Beep Level]: [Shutter Vol.]: [t ] [u ] [s ]...
Page 46
![Page 46
- 46 -
Basic
•High Angle Mode is also canceled if you turn the camera off.•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may
appear different from real life on the LCD monitor. However, this does not affect the recorded
pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in
Power LCD Mode. Press any button to make the LCD monitor bright again.
•When [LCD Mode] is set, the usage time is reduced.
[LCD Mode]...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-45.png "Page 46
- 46 -
Basic
•High Angle Mode is also canceled if you turn the camera off.•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may
appear different from real life on the LCD monitor. However, this does not affect the recorded
pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in
Power LCD Mode. Press any button to make the LCD monitor bright again.
•When [LCD Mode] is set, the usage time is reduced.
[LCD Mode]...")
- 46 - Basic •High Angle Mode is also canceled if you turn the camera off.•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear different from real life on the LCD monitor. However, this does not affect the recorded pictures. •The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD Mode. Press any button to make the LCD monitor bright again. •When [LCD Mode] is set, the usage time is reduced. [LCD Mode]...
Page 47
![Page 47
- 47 -
Basic
•Motion picture recording area display is only an approximation.•Recording area display may disappear when zooming to Tele depending on the picture size setting.•It will be fixed to [OFF] during the Intelligent Auto Mode.
•[Auto Power Off] is set to [5MIN.] in the Intelligent Auto Mode.•[Auto Power Off] does not work in the following cases.–When using the AC adaptor (supplied)
–When connecting to a PC or a printer–When recording or playing back motion pictures–During a Slide Show
–[Auto...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-46.png "Page 47
- 47 -
Basic
•Motion picture recording area display is only an approximation.•Recording area display may disappear when zooming to Tele depending on the picture size setting.•It will be fixed to [OFF] during the Intelligent Auto Mode.
•[Auto Power Off] is set to [5MIN.] in the Intelligent Auto Mode.•[Auto Power Off] does not work in the following cases.–When using the AC adaptor (supplied)
–When connecting to a PC or a printer–When recording or playing back motion pictures–During a Slide Show
–[Auto...")
- 47 - Basic •Motion picture recording area display is only an approximation.•Recording area display may disappear when zooming to Tele depending on the picture size setting.•It will be fixed to [OFF] during the Intelligent Auto Mode. •[Auto Power Off] is set to [5MIN.] in the Intelligent Auto Mode.•[Auto Power Off] does not work in the following cases.–When using the AC adaptor (supplied) –When connecting to a PC or a printer–When recording or playing back motion pictures–During a Slide Show –[Auto...
Page 48
![Page 48
- 48 -
Basic
•When the [Reset] setting is selected during recording, the operation that resets the lens is also
performed at the same time. You will hear the sound of the lens operating but this is normal and not
indicative of malfunctioning.
•When [Setup] menu settings are reset, the following settings are also reset.
–The birthday and name settings for [Baby1]/[Baby2] and [Pet] in Scene Mode.–The [Travel Date] setting. (Departure date, return date, destination)–The [World Time] setting.
•The folder...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-47.png "Page 48
- 48 -
Basic
•When the [Reset] setting is selected during recording, the operation that resets the lens is also
performed at the same time. You will hear the sound of the lens operating but this is normal and not
indicative of malfunctioning.
•When [Setup] menu settings are reset, the following settings are also reset.
–The birthday and name settings for [Baby1]/[Baby2] and [Pet] in Scene Mode.–The [Travel Date] setting. (Departure date, return date, destination)–The [World Time] setting.
•The folder...")
- 48 - Basic •When the [Reset] setting is selected during recording, the operation that resets the lens is also performed at the same time. You will hear the sound of the lens operating but this is normal and not indicative of malfunctioning. •When [Setup] menu settings are reset, the following settings are also reset. –The birthday and name settings for [Baby1]/[Baby2] and [Pet] in Scene Mode.–The [Travel Date] setting. (Departure date, return date, destination)–The [World Time] setting. •The folder...
Page 49
- 49 - Basic •Refer to P36 for information about how to play back pictures.•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”. •It may not be possible to rotate pictures that have been recorded with other equipment.•The...
Page 50
![Page 50
- 50 -
Basic
•The Stabilizer function is switched between [On] and [Off] every time [MENU/SET] is pressed during
the [Stabilizer Demo.].
•In Playback Mode, [Stabilizer Demo.] cannot be displayed.•[Stabilizer Demo.] is an approximation.
•[Auto Demo] is not output to the television.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows. ([Auto Demo])
[Stabilizer Demo.]:
AAmount of jitter
B Amount of jitter after...](http://img.usermanuals.tech/thumb/58/66158/w300_dmc-sz5_adv_en_om_d-49.png "Page 50
- 50 -
Basic
•The Stabilizer function is switched between [On] and [Off] every time [MENU/SET] is pressed during
the [Stabilizer Demo.].
•In Playback Mode, [Stabilizer Demo.] cannot be displayed.•[Stabilizer Demo.] is an approximation.
•[Auto Demo] is not output to the television.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows. ([Auto Demo])
[Stabilizer Demo.]:
AAmount of jitter
B Amount of jitter after...")
- 50 - Basic •The Stabilizer function is switched between [On] and [Off] every time [MENU/SET] is pressed during the [Stabilizer Demo.]. •In Playback Mode, [Stabilizer Demo.] cannot be displayed.•[Stabilizer Demo.] is an approximation. •[Auto Demo] is not output to the television. [Demo Mode] Displays the amount of jitter the camera has detected. ([Stabilizer Demo.]) The camera’s features are displayed as slide shows. ([Auto Demo]) [Stabilizer Demo.]: AAmount of jitter B Amount of jitter after...