Panasonic Digital Camera Dmc Sz10 Owners Manual For Advanced Features

							- 111 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images While Recording], and 
then press [MENU/SET].
4Press  3/4  to select [Smartphone], and then press [MENU/
SET].
5Press [MENU/SET].6Press [MENU/SET].
•For details on the connection methods, refer to  P104, 105 .
7Press  3/4  to select a device you want to connect, and then press [MENU/S ET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press 2. (P127)
9Take pictures.
•The pictures are sent automatically after taking them.•To change the setting or disconnect, press [Wi-Fi].  (P100)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
•You cannot record motion pictures when the camera is connected  using [Send Images While 
Recording].
Sending an image each time a recording is made ([Send Images Wh ile Recording] )
CancelSelectSet
Select a functionRemote Shooting & ViewSend Images While RecordingSend Images Stored in the Camera 
						

							- 112 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images Stored in the Camera], 
and then press [MENU/SET].
4Press  3/4  to select [Smartphone], and then press [MENU/
SET].
5Press [MENU/SET].6Press [MENU/SET].
•For details on the connection methods, refer to  P104, 105 .
7Press  3/4  to select a device you want to connect, and then press [MENU/S ET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press 2. (P127)
9Press  3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P100)
Sending selected images ([Send Images Stored in the Camera])
[SINGLE] setting
1 Press  2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press  3/4/ 2/1 to select the picture, and then press 
[MENU/SET]. (repeat this step)
•
If you press [MENU/SET] again, the setting is canceled.
2 Press  2 to select [OK], and then press [MENU/SET].
•The number of pictures that can be sent by [MULTI] is 
limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
CancelSelectSet
Select a functionRemote Shooting & ViewSend Images While RecordingSend Images Stored in the Camera
123
456
789
2. 
						

							- 113 -
Wi-Fi
When sending images to PC
∫Methods for sending and images that can be sent
•
When you send a motion picture, w e recommend supplying power with the AC adaptor (supplied).•Some images may not be played back or sent depending on the dev ice.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P126.
Click the followings to jump to the beginning of each menu. You can send pictures and motion pictures recorded with 
this unit to a PC.
You can also set this unit so that images on it are transferred  
automatically while it is being charged.
(Smart Transfer)  (P116)
JPEGMotion JPEG
Sending an image each time a recording is made
([Send Images While Recording]) ±
—
Sending selected images
([Send Images Stored in the Camera]) ±±
Preparations
(On the camera)
•
If the workgroup of the destination PC has been 
changed from the standard setting, you also 
need to change the setting of this unit in [PC 
Connection]. 
(P128)(On your PC)
•Turn the computer on.•Prepare folders for receiving images on the PC 
before sending a picture to the PC.  (P114)
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] ) P114
Sending selected images ([Send Images Stored in the Camera]) P115 
						

							- 114 -
Wi-Fi
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters.
An attempt to create a receive folder may fail if the account i ncludes non-alphanumeric characters.
•The name of a destination folder must consist of 20 or less alp hanumeric characters. 
(For Windows)
Supported OS: Windows VistaR/WindowsR 7/WindowsR 8/WindowsR 8.1
Example: Windows 7
1Select a folder you intend to use for receiving, then right-cli ck.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.10
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]   [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].3Press  3/4  to select [Send Images While Recording], and then press [MENU/ SET].
4Press 3/4  to select [PC], and then press [MENU/SET].
5Press [MENU/SET].
•For details on the connection methods, refer to  P120.
6Press  3/4  to select the PC you want to connect to, and 
then press [MENU/SET].
•
When the PC you want to connect to is not displayed, select 
[Manual Input], and enter the computer name of the PC (NetBIOS 
name for Apple Mac computers).
7Press  3/4  to select the destinations folder of the PC, and then press [M ENU/SET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press 2. (P127)
9Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P100)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
•You cannot record motion pictures when the camera is connected  using [Send Images While 
Recording].
To create a folder that receives images
Sending an image each time a recording is made ([Send Images Wh ile Recording] )
CancelSelectSet
Select a functionRemote Shooting & ViewSend Images While RecordingSend Images Stored in the Camera 
						

							- 115 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [PC], and then press [MENU/SET].
5Press [MENU/SET].
•For details on the connection methods, refer to  P120.
6Press  3/4  to select the PC you want to connect to, and then press [MENU/ SET].
•When the PC you want to connect to is not displayed, select [Ma nual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
7Press  3/4  to select the destinations folder of the PC, and then press [M ENU/SET].
8Check the send setting, and then press [MENU/SET].
•To change the send setting, press 2. (P127)
9Press  3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P100)
•Folders sorted by the sent date are created in the specified fo lder, and pictures are saved in those 
folders.
•If the screen for a user account and password entry appears, en ter the one you set on your PC.
•When the computer name (NetBIOS name for Apple Mac computers) c ontains a space (blank 
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the  computer name (or NetBIOS 
name) to the one consisting of only alphanumeric characters, wi th a maximum of 15 characters.
Sending selected images ([Send Images Stored in the Camera])
[SINGLE] setting
1 Press  2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press  3/4/ 2/1 to select the picture, and then press 
[MENU/SET]. (repeat this step)
•
If you press [MENU/SET] again, the setting is canceled.
2 Press  2 to select [OK], and then press [MENU/SET].
•The number of pictures that can be sent by [MULTI] is 
limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
123
456
789
2. 
						

							- 116 -
Wi-Fi
To transfer images automatically ([Smart Transfer])
Smart Transfer is a function that automatically transfers images in the camera to a PC.
The transfer starts when you connect the camera to the AC adaptor (supplied).
•
When [Auto Transfer] is set to [ON], the camera automatically u ploads recorded images. For this 
reason images may be uploaded unintentionally if, for example,  you share this unit with other 
people.
Panasonic assumes no responsibility for any damages caused by u ploaded images.
•Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].
•When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to  [ON], and 
turn off the camera because electromagnetic waves, etc. emitted  by the camera may interfere with 
gauges.  (P42)
•When a charging error occurs, Smart Transfer may not be perform ed. (P145)•Smart transfer is not available for images stored in the built- in memory.•[Smart Transfer] is not available when the memory card is locke d.
Example of [Auto Transfer]
AAC adaptor (supplied)
B USB connection cable (supplied)
C PC1Set [Auto Transfer] to [ON]
2 Record
3 Charge
4 Start a transfer
To perform Smart Transfer, follow the steps below:
1Set up Smart Transfer (initial setup).  (P117)2Perform [Auto Transfer]. (P117)



 
						

							- 117 -
Wi-Fi
When using Smart Transfer for the first time, follow the steps below to set it up.
From the next time on, you can change the settings from [Set De stination] (P118).
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P38)
2Press  3/4  to select [Smart Transfer], and press [MENU/SET].3Select the method for connecting to a wireless access point, an d set.
•Refer to P120 for details.
4Set the transfer destination.
•For details about the preparations before the transfer, refer t o “When sending images to PC” on 
P113 .
5Press  3/4  to select [Auto Transfer], and press [MENU/SET].6Press  3/4  to select [ON], and press [MENU/SET].
•Only the images you recorded when [Auto Transfer] is set to [ON ] is transferred.
You can transfer images while charging the camera.
Preparation:
Configure [Smart Transfer] in advance. (P117)
1Turn off the camera.2(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB  connection cable 
(supplied), and insert the AC adaptor (supplied) into the power  outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (su pplied).
•
Smart Transfer will start.
(When the remaining battery power is low, charging may be given  the priority.)
•Depending on the specifications of the PC, [Smart Transfer] may fail.
•If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that 
confirms whether to transfer these images is displayed. Select a desired option.
Configuring [Smart Transfer]
1Press  3/4 to select a PC you want to connect, and then press [MENU/SET].
2 Press  3/4 to select the folder you want to send, and then press [MENU/SE T].
Transferring automatically 
						

							- 118 -
Wi-Fi
Changing the transfer destination or settings of images.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P38)2Press  3/4  to select [Smart Transfer], and press [MENU/SET].
3Press  3/4  to select [Set Destination], and press [MENU/SET].4Press  3/4  to select the item, and press [MENU/SET].
You can check the date and details of transferred images.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P38)2Press  3/4  to select [Smart Transfer], and press [MENU/SET].
3Press  3/4  to select [Display Log], and press [MENU/SET].
•Dates and content of transferred images are displayed.
Exit the menu when you are done viewing.
[Set Destination]
ItemDescription of settings
[Destination] Changes the wireless access point to be connected.
Select the method for connecting to a wireless access point, an
d set.
•Refer to P120 for details.
[Size] Resizes the image to send.
[Original]/[Change]
•You can select the picture size from [M] or [S] in [Change].
The aspect ratio does not change.
[Display Log] 
						

							- 119 -
Wi-Fi
About Connections
You can select a connection method after selecting a Wi-Fi function and a destination.
When connecting with the same settings as the previous ones, you can use the Wi-Fi function 
quickly by connecting via [History Connection] or  [Favorite Connection].
Connecting to a PC ([Via Network])  (P120)
Connects via a wireless access point.
Connecting to a smartphone/tablet ([Direct])  (P123)
Your device connects directly to this unit.
A Wireless access point
CancelOK
Via NetworkConnect to the
network (AP)
A
Cancel OK
DirectConnect directly
to the destination 
						

							- 120 -
Wi-Fi
You can select the method for connecting to a wireless access point.¢WPS refers to a function that allows you to easily configure th e 
settings related to the connection and security of wireless LAN  
devices.
To check if the wireless access point you are using is compatib le with 
WPS, refer to the manual of the wireless access point.
Connecting to a PC (via a network)
Connection methodDescription of settings
[WPS (Push-Button)] Save push button type wireless access point that is compatible 
with 
Wi-Fi Protected Setup
TM with a WPS mark.
Press the wireless access point WPS 
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction 
manual for details. e.g.:
[WPS (PIN code)]Save PIN code type wireless access point that is compatible wit
h Wi-Fi 
Protected Setup with a WPS mark.
1Press  3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
2Enter the PIN code displayed on the camera screen into 
the wireless access point.
3Press [MENU/SET].
•Refer to the wireless access point instruction manual for detai ls.
[From List]Select this option when you are not sure about the WPS compatib
ility, or 
when you want to search for and connect to a wireless access po int.
•Refer to P121 for details.
CancelSelectSet
From List
Use button on
the WPS deviceWPS (PIN code) WPS (Push-Button)
Select connection method
WPSWPS button