Panasonic Digital Camera Dmc Sz1 Owners Manual For Advanced Features

							- 81 -
Playback/Editing
You can display pictures by recording date.Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2012.•If you take pictures after setting the travel destination in [World Time], the pictures are 
displayed by the dates at the travel destination in Calendar Playback.
  [Calendar]
Press  3/4/2/ 1 to select the date to be played 
back.
•If there were no pictures recorded during a month, that month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ] to return to the calendar screen. 
						

							Playback/Editing
- 82 -
Playback/EditingHaving Fun with Recorded Pictures
The brightness and color of the pictures taken can be balanced.
•With [Auto Retouch], a new edited picture is created. Check that there is free space on the 
built-in memory or the card.
[Auto Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
¢ These pictures are examples to show the effect.
(DMC-SZ1) (DMC-SZ02) 
Press  2/1 to select a picture, and then press  3.
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
(DMC-FH8)
Press  2/1 to select a picture, and then press  3.
Press  3/4 to select [Auto Retouch], and then press [MENU/SET].
Press  3/4 to select [ON], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Note
•Depending on the picture, noise may be emphasised by [Auto Retouch].•Effects may be difficult to see depending on the picture.•It may not be possible to perform [Auto Retouch] on pictures which have already been 
retouched.
•[Auto Retouch] may not be performed on pictures recorded with other equipment.•[Auto Retouch] is not possible in the following cases:–Motion pictures–Pictures taken in [Panorama Shot] and [Photo Frame] in Scene Mode
 [Auto Retouch] 
						

							- 83 -
Playback/Editing
Apply effects similar to that of aesthetics or makeup to brighten up any face.
•With [Beauty Retouch], a new edited picture is created. Check that there is free space on the 
built-in memory or the card.
[Beauty Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
Press 2/1 to select a picture, and then press  3.
Press  3/4 to select [Beauty Retouch], and then press [MENU/SET].
Press  2/1 to select the face of the person to edit, 
and then press [MENU/SET].
•Only a person with an arrow can be selected.
Press  3/4 to select the item, and then press  1.
Select effects from each of the following items.
Press  3/4 to select the effect.
•To continue to add different effects, press  2, and repeat steps 4 and 5.
 [Beauty Retouch] (DMC-FH8)
ItemDescription of settings
[] ([Aesthetic Retouch])
Gives skin a more transparent look, or make eyes 
and teeth look whiter.
[]([Foundation])Adjust skin color.
[]([Make Up Retouch])Add color to lips, more volume to faces or clarity 
to eyes. 
						

							Playback/Editing
- 84 -
After finishing the picture editing, press [MENU/SET].
•Confirmation screen is displayed. Selecting [Yes] displays images before application 
and after application.
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Note
•[Beauty Retouch] cannot be used on people who have already been retouched, or two or more 
people at the same time. To use [Beauty Retouch] for these pictures, save the picture first, then 
select the person to retouch.
•The brightness and color of pictures you are checking before saving may differ to the actual 
picture that is saved.
•[Beauty Retouch] cannot be used with motion pictures or pictures recorded with [Panorama 
Shot] in Scene Mode.
•[Beauty Retouch] may not be performed on pictures recorded with other equipment.•Intended retouching may not be possible when  the face detection is not performed properly.•When a subject is wearing glasses, the desired retouch may not be possible.•When a picture is bright due to reflected light from a flash or the sun, the retouching effect may 
be less pronounced.
•To take pictures appropriate for [Beauty Retouch]:–Record a large, frontal view of the face–Avoid taking pictures in a very dark place–Clearly record the part you intend to retouch•Reallusion is a trademark of Reallusion Inc. 
						

							- 85 -
Playback/Editing
Using the [Playback] Menu
You can set up pictures to be uploaded to image sharing sites and perform actions like 
cropping recorded pictures, as well as set up the protection of recorded images, etc.
•
With [Text Stamp], [Resize] or [Cropping], a new edited picture is created. A new picture cannot 
be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
•
You can only upload motion pictures to YouTube, while you may upload both motion pictures 
and still pictures to Facebook.
•This cannot be done to the images in the built-in memory. Copy the images to a card 
(P96) , and then perform the [Upload Set].
Select [Upload Set] on the [Playback] menu.  (P37)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
 [Upload Set]
Select the picture, and then press 
[MENU/SET] to set.
•The setting is canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
•Confirmation screen is displayed. It is 
executed when [Yes] is selected. 
Exit the menu after it is executed.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 86 -
∫Upload to the image sharing sites
An upload tool built into the camera, “LUMIX Image Uploader,” is automatically copied to 
the card when you set up [Upload Set].
Perform the upload operation after connecting the camera to a PC  (P102). For details, 
refer to  P104.
∫ Canceling all the [Upload Set] settings
1Select [Upload Set] on the [Playback] menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•Setting may not be possible for pictures recorded with other cameras.•It cannot be set with the card less than 512 MB. 
						

							- 87 -
Playback/Editing
You can stamp the recording date/time, name, location or travel date onto the recorded 
pictures.
Select [Text Stamp] on the [Playback] menu. (P37)
Press 3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Press  3/4 to select [Set], and then press [MENU/SET].
Press  3/4 to select text stamp items, and then press [MENU/SET].
Press  3/4 to select the settings, and then press [MENU/SET].
 [Text Stamp]
Select the picture, and then press 
[MENU/SET] to set.
•[‘ ] is displayed on pictures already with 
date or text stamped.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.
ItemSetting item
[Shooting Date]
[W/O TIME]:Stamp the year, month and day.
[WITH TIME]:Stamp the year, month, day, hour and minutes.
[OFF]
[Name]
[]
([Baby/Pet]):Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location]
[ON]:Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date][ON]:Stamps the travel date set under [Travel Date].
[OFF] 
						

							Playback/Editing
- 88 -
Press [ ].
Press 3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the 0.3M pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–Pictures recorded without setting the clock–Pictures with date or text stamped–Pictures recorded with other equipment 
						

							- 89 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•The order of images will change if motion pictures are divided.
It is recommended to search these motion pictures by using [Calendar] or [Category Selection] 
in the [Filtering Play].
•Motion pictures with a short recording time cannot be divided.
 [Video Divide]
Select [Video Divide] on the [Playback] menu.  (P37)
Press  2/1 to select the motion picture to divide, and then press 
[MENU/SET].
Press  3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing  2/1 
while the motion picture is paused.
Press  4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the 
dividing. 
						

							Playback/Editing
- 90 -
To allow easy posting to web pages, attachment to email etc., picture size (number of 
pixels) is reduced.
Select [Resize] on the [Playback] menu.  (P37)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•The following images cannot be resized.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–Pictures with date or text stamped
 [Resize]
Select the picture and size.
[SINGLE] setting
1Press  2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to 
set.
•Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.