Panasonic Digital Camera Dmc Lz30 Owners Manual For Advances Features

- 121 -VQT4V99
Q&A  Troubleshooting
TV, computer, printer
No image appears on TV. Image blurred or not colored. ●Not connected correctly (→102). ●The television has not been switched to auxiliary input.  ●Check the [Video Out] setting (NTSC/PAL) on the camera. (DMC-LZ30PU only.) (→50)
TV screen display different to LCD monitor. ●Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV. ●Card is inserted into TV. →  Connect with AV cable (supplied)...

- 122 -VQT4V99
Q&A  Troubleshooting
Others
Menu not displayed in desired language. ●Change [Language] setting (→51).
Camera rattles if shaken. ●This sound is made by the lens movement and is not a fault.
Red lamp illuminated when pressing shutter button halfway in dark locations. ●[AF Assist Lamp] is set to [ON] (→88).
AF Assist Lamp is not illuminated. ●[AF Assist Lamp] is set to [OFF] (→88). ●Not illuminated in bright locations.
Camera is hot. ●Camera may become a little warm during use, but this does...

- 123 -VQT4V99
Usage cautions and notes
When in use
 ●Camera may become warm if used for long periods of time, but this is not a fault. ●Keep this unit as far away as possible from electromagnetic equipment (such as 
microwave ovens, TVs, video games etc.).
 • If you use this unit on top of or near a TV
, the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave radiation.
 • Do not use this unit near cell phones because doing so may result in noise adversely  affecting the...

- 124 -VQT4V99
Usage cautions and notes
Memory cards
 ●To prevent damage to cards and data • Avoid high temperatures, direct sunlight, electromagnetic waves, and static electricity. • Do not bend, drop, or expose to strong impacts. • Do not touch terminals on reverse of card or allow them to become dirty or wet. ●When disposing of/transferring memory cards • If using the “format” or “delete” functions on your camera or computer, this only changes the file management information, and does not completely...

- 125 -VQT4V99
Usage cautions and notes
Batteries
 ●Be sure to remove the batteries from the camera if you are not using it for a long period 
of time.
 • If the batteries are left in the camera, a small electrical current continues to flow even when the camera is turned off and the batteries will be gradually drained.
 • If the temperature is too high or low or the humidity is high, the terminals may rust causing a malfunction.
 • Be sure to store the batteries in cool (15 °C to 25 °C (59 °F to 77 °F))...

- 126 -VQT4V99
Usage cautions and notes
Rechargeable Ni-MH batteries
 ●You can use Ni-MH batteries after charging them with a dedicated battery charger. 
However, improper handling of the batteries may cause leakage, heat generation, fire 
or an explosion. Observe the following.
 • If there is dirt on the battery poles, you may not be able to charge the batteries  normally. Carefully clean the battery poles and battery charger terminals with a soft 
dry cloth.
 • Do not peel off or scratch the covering...

- 127 -VQT4V99
Usage cautions and notes
Lens
 ●Images may appear slightly white if lens is dirty (fingerprints, etc.). Lightly wipe the 
surface of the lens with a soft, dry cloth before and after taking pictures.
 ●Do not leave the lens exposed to direct sunlight. ●Do not press the lens with excessive force.
When using a tripod or unipod
 ●Do not apply excessive force or tighten screws when they are crooked. (This may 
damage the camera, screw hole, or label.)
 ●Ensure that the tripod is stable. (Refer...

 • SDXC Logo is a trademark of SD-3C, LLC.
 • QuickTime and the QuickT
ime logo are trademarks or 
registered trademarks of Apple Inc., used under license 
therefrom.
 • Windows and Windows Vista are either registered trademarks  or trademarks of Microsoft Corporation in the United States 
and/or other countries.
 • Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
 • Other names, company names, and product names mentioned in these instructions are trademarks or...