Panasonic Digital Camera Dmc Lz2pp Operating Instructions

							Playback (advanced)
71VQT0P65
Using the [PLAY] mode menu
You can use various functions in playback 
mode such as a rotating function or 
protections for recorded pictures.
 
 When rotating the zoom lever toward T or W, the page of the menu screen can be 
forwarded or reversed.
 After selecting a menu item with the 
operation described above, make settings 
for each menu. : [ROTATE DISP.] (P72)
: [ROTATE] (P72)
: [PROTECT] (P75)
: [DPOF PRINT] (P73)
: [SLIDE SHOW] (P76)
: [AUDIO DUB.] (DMC-LZ2 only)
(P77)
: [RESIZE] (P78)
: [TRIMMING] (P79)
: [COPY] (P81)
: [FORMAT] (P82)
PLAY1/2
RO
DPOF PRINT
SLIDE SHO PR
EXITMENUSELECT
MENU
RON
Menu items
LZ2_1PP.book  71 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
72VQT0P65
This mode allows you to display pictures 
recorded by holding the camera vertically 
or pictures rotated in [ROTATE] function in 
the rotated direction.
1Select [ON] to set it.
 When you select [OFF], the pictures are 
displayed without being rotated.
 Refer to P49 for how to play back  pictures.
 When you take pictures by holding the 
camera vertically, read “Tips for taking 
good pictures” on P32 carefully.
 The direction detection function (P33) 
may not work properly on pictures 
recorded by aiming the camera up or 
down.
 Only still pictures in normal playback can  be rotated. When playing back rotated 
pictures in zoom playback or multi 
playback, pictures appear in original 
orientation.
 You can rotate and display pictures by 
using [ROTATE] function even if you do 
not take pictures by holding the camera 
vertically. You can rotate the recorded pictures in 
steps of 90° and display them.
∫
Example
When rotating clockwise ( )
Original
picture
1 Select the picture to be rotated 
and set it.
 Pictures recorded in motion image 
mode [ ] and protected pictures 
cannot be rotated.
Displaying pictures in a direction at the time of 
recording 
[ROTATE DISP.]
PLAY1/2
SLIDE SHO PR
EXITMENUSELECT
RO
DPOF PRINT
OFFRON
SET
Rotating the Picture [ROTATE]
EXITMENU
RO
SET
SELECT2560100 _
00011/5
LZ2_1PP.book  72 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
73VQT0P65
2Select the direction to rotate the 
picture.
 When you play back pictures on a PC, you 
cannot play back pictures keeping the 
rotated direction without an OS or 
software compatible with Exif.
 Exif is the file format for still pictures, to 
which recording information and other can 
be added, established by JEITA [Japan 
Electronics and Information Technology 
Industries Association].
 When [ROTATE DISP.] is set to [OFF],  [ROTATE] function is disabled.
 When pictures are recorded by holding  the camera vertically, the pictures are 
played back vertically (the pictures are 
rotated). DPOF (Digital Print Order Format) is a 
system that allows the user to select which 
pictures are to be printed, how many copies 
of each picture will be printed or whether 
the recording date is to be printed on 
compatible photo printers or commercial 
photo printing services.
For details, ask photo printing servicer.
When you want to use commercial photo 
printing servicer to print pictures recorded 
in the built-in memory, copy them onto the 
card (P81) and then set the DPOF setting.
For more information please visit:
http://panasonic.jp/dc/dpof_110/
white_e.htm
1
Select [SINGLE], [MULTI] or 
[CANCEL].
The picture rotates clockwise in 
steps of 90°.
The picture rotates 
counter-clockwise in steps of 90°.
RO
EXITMENUSELECT
MENU
2 times
Setting the Picture to be 
Printed and the Number of 
Prints 
[DPOF PRINT]
PLAY1/2
SLIDE SHO PR
EXITMENUSELECT
RO
SINGLE
MUL
CANCEL
DPOF PRINT
RON
LZ2_1PP.book  73 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
74VQT0P65
∫Single setting
Select the picture and set the number of 
prints.
 The number of prints can be set from 0 to  999.
 The number of prints icon [ ] appears.
 When the number of prints is set to “0”,  DPOF print setting is canceled.
∫ Multi setting
Select the pictures and set the number 
of prints.
 Repeat the above procedure.
 The number of prints can be set from 0 to 
999.
 The number of prints icon [ ] appears.
 When the number of prints is set to “0”, 
DPOF print setting is canceled. ∫
To cancel all settings
Select [YES] to cancel all settings.
 When a card is not inserted, DPOF print  settings on the built-in memory are 
canceled. When a card is inserted, DPOF 
print settings on the card are canceled.
∫ To print the date
You can set/cancel the printing with the 
recorded date by pressing the [DISPLAY] 
button after setting the number of prints.
 The date print icon [ ] appears.
 When using the software “SD Viewer for 
DSC” in the CD-ROM (supplied), you can 
print pictures with the date by setting the 
position on the print preview screen. For 
details, refer to the separate operating 
instructions about PC connection.
 When you go to a photo studio for digital 
printing, be sure to order the printing of 
the date additionally if required.
DADISPLA
EXIT
1DPOF SET 
COUNT1
SELECTMENU
MENU
100 _
00011/18
2 times
7
101112
9
1
8
DADISPLA
EXIT
COUNT1
SELECTMENU
DPOF SET MUL
MENU
2 times
CANCEL ALL DPOF
CANCEL ALL DPOF
PRINT SETTINGS?
SELECTSET
YESNO
MENU
DADISPLA
EXIT
1DPOF SET 
COUNT1
SELECTMENU
DA
100
_
00011/18
DA
LZ2_1PP.book  74 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
75VQT0P65
 The date may not be printed depending on photo studios or printers even if you set 
the date print. For further information, ask 
the photo studio or refer to the operating 
instructions of the printer.
 DPOF print setting is a convenient function when you print pictures with 
printers supporting PictBridge. (P88)
 DPOF is an abbreviation of Digital Print  Order Format. This feature allows you to 
write print information into the media and 
to use such information on the 
DPOF-compliant system.
 If the file is not based on the DCF 
standard, the DPOF print setting cannot 
be set. DCF is an abbreviation of [Design 
rule for Camera File system], stipulated by 
JEITA [Japan Electronics and Information 
Technology Industries Association].
 When setting the DPOF print on the  camera, delete any previous DPOF print 
settings made by other equipment. You can set the protection for the pictures 
which you do not want to be deleted by 
accident.1
Select [SINGLE], [MULTI] or 
[CANCEL].
∫ Single setting
Select the picture and set/cancel the 
protection.
Preventing Accidental Erasure  of the Picture [PROTECT]
SET The protect icon [ ] appears.
CANCEL The protect icon [ ] 
disappears.
PLAY1/2
SLIDE SHO
EXITMENUSELECT
RO
SINGLE
MUL
CANCEL
DPOF PRINTPR
RON
SET/CANCELMENU
PR
SELECT
MENU
100
_
00011/5
2 times
LZ2_1PP.book  75 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
76VQT0P65
∫Multi setting/To cancel all settings
Perform the same operation as in “Setting 
the Picture to be Printed and the Number of 
Prints [DPOF PRINT]”. (P73 – 75)
 If you want to delete protected pictures, 
cancel the protect setting first.
 While this feature protects the pictures  from accidental erasure, formatting the 
card will permanently delete all data. 
(P82)
 The protect setting may not be effective in 
other equipment.
 Sliding the Card Write-Protect switch  A 
on the SD Memory Card to [LOCK] 
prevents the picture from deletion even if 
the protection is not set.
 The following functions cannot be used  with protected pictures.
–[ROTATE] (P72)
– [AUDIO DUB.] (DMC-LZ2 only) (P77)
1 Set the items of the Slide Show.
¢When the camera is connected to TV 
(P84), the audio can be played back.
2 Select [START].
3By pressing the [MENU] button, 
the Slide Show stops.
Playing Back with Slide Show [SLIDE SHOW]
DURATION It can be set to 1, 2, 3 or 
5 seconds.
AUDIO
¢
(DMC-LZ2 
only) By setting it to [ON], the 
audio of the pictures with 
audio can be played back 
during Slide Show.
SLIDE SHO
EXITMENU
ST
AU1
2
3
5DURA
SELECT
SLIDE SHO
EXITMENU
ST
AU1 OFFDURA
SELECT
LZ2_1PP.book  76 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
77VQT0P65
∫SD Slide Show
If you insert a card including the SD 
Slide Show edited with the [SD Viewer for 
DSC] which is in the supplied CD-ROM, 
and then turn the camera on in playback 
mode, the confirmation screen appears. 
Select [YES] and press  1 to start the SD 
Slide Show. Select [NO] and press  1 to 
start normal playback.
 Pictures set with the DPOF Slide Show by  the [SD Viewer for DSC] cannot be played 
back as a Slide Show.
 Motion images cannot be played back in 
the Slide Show.
 When you play back pictures with audio,  the next picture appears after the 
playback of the audio is finished (when 
[AUDIO] is set to [ON]). (DMC-LZ2 only) You can record the audio after taking a 
picture (max. 10 seconds per picture). 
1
Select the picture and start audio 
recording.
 When audio has already been 
recorded, the confirmation screen 
appears. Press  4 to select [YES], and 
press  1 to start audio recording. (The 
original audio is overwritten.)
 The audio dubbing cannot be used with  the following pictures.
– Motion images
– Protected pictures
Adding Audio to Recorded Pictures [AUDIO DUB.]
(DMC-LZ2 only)
AUDUB
ST EXITMENUSELECT
2560100_
00011/5
LZ2_1PP.book  77 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
78VQT0P65
2Stop audio recording.
 The audio recording stops by pressing 
the  4 button.
 Even if you do not press  4, after about 
10 seconds, the audio recording stops 
automatically.
This function is useful if you want to reduce 
the file size of the picture in cases when it 
needs to be attached to an e-mail or 
uploaded to a website.
1 Select the picture and set it.
 The following pictures cannot be 
resized.
– Pictures equal to or smaller than 
640 k480 pixels
– Pictures recorded after setting the  picture size to [HDTV]
– Motion images
– Pictures with audio (DMC-LZ2 only)
 It may not be possible to resize pictures 
recorded with other equipment.
2 Select the size and set it.
 Sizes smaller than the recorded picture 
are displayed.
AUDUB
ST
MENU
2560100 _
00011/5
2 times
Resizing the Pictures [RESIZE]
RESIZE
EXITMENUSET SELECT
2560100 _
00011/5
2560
2048
RESIZE
EXITMENURESIZE
SELECT
2560100 _
00011/5
LZ2_1PP.book  78 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
79VQT0P65
 [2048]: 2048k1536 pixels
(DMC-LZ2 only)
 [1600]: 1600 k1200 pixels
 [1280]: 1280 k960 pixels
 [640]: 640 k480 pixels
3Select [YES] or [NO] and set it.
 When you select [YES], the picture is 
overwritten.
When resized pictures are overwritten, 
they cannot be restored.
 When the original picture is protected,  you cannot overwrite the resized 
picture.
When you select [NO], a resized picture 
is newly created.
Use this function when you trim needed 
parts of the recorded picture.
1 Select the picture to trim and set 
it.
 The following pictures cannot be 
trimmed.
– Pictures smaller than 640 k480 pixels
– Pictures recorded after setting the 
picture size to [HDTV]
– Motion images
– Pictures with audio (DMC-LZ2 only)
 It may not be possible to trim pictures  recorded with other equipment.
RESIZE
CANCELMENU
DELETE ORIGINAL
PICTURE?
SELECT
YESNO
MENU
2 times
Trimming the Pictures [TRIMMING]
TRIMMING
EXITMENUSELECTSET
2560
1/5100 _
0001
LZ2_1PP.book  79 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
80VQT0P65
2Enlarge or decrease the picture.
3Shift the picture and press the 
shutter button to set.
4Select [YES] or [NO] and set it.
 When you select [YES], the picture is 
overwritten.
When trimmed pictures are overwritten, 
they cannot be restored.
 When the original picture is protected,  you cannot overwrite the trimmed 
picture.
When you select [NO], a trimmed 
picture is newly created.
 Pictures will not be displayed in the 
rotated direction even if [ROTATE DISP.] is 
set to [ON]. (P72)
 The picture size of the trimmed pictures 
may become smaller than that of the 
original one depending on the cut size.
 The picture quality of the trimmed picture 
will be deteriorated.
ZOOMEXIT
TRIMMING
MENU
T
W
2560
1/5100 _
0001
TRIM:SHUTTER ZOOMEXIT
TRIMMING
MENU
2560
1/5100 _
0001
CANCELMENU
DELETE ORIGINAL
PICTURE?
SELECT
TRIMMING
YESNO
MENU
2 times
LZ2_1PP.book  80 ページ  ２００５年１月１４日　金曜日　午前７時５６分