Home > Panasonic > Digital Camera > Panasonic Digital Camera Dmc Lz2pp Operating Instructions

Panasonic Digital Camera Dmc Lz2pp Operating Instructions

Here you can view all the pages of manual Panasonic Digital Camera Dmc Lz2pp Operating Instructions. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.

Page 31

Recording pictures (basic)
31VQT0P65
∫Normal recording
The camera automatically sets the shutter 
speed and the aperture value according to 
the brightness of the subject.
1 1 Turn the camera on.
2 Select normal picture mode 
[].
2Aim the AF area  1 to the point 
you want to focus and then press 
the shutter button halfway.
 A : Press the shutter button halfway to 
foc us.
 The focus indication  2 is lit and then 
the aperture value  3 and the shutter 
speed  4 are displayed.
3Take a picture.
B :...

Page 32

Recording pictures (basic)
32VQT0P65
∫AF/AE Lock (AF: Auto focus/
AE: Auto exposure)
When recording a picture of people with a 
composition as the above picture, you 
cannot focus on the subject because it is 
out of AF area in usual operation.
In this case,
1 Aim the AF area at the subject.
2 Press the shutter button halfway to fix 
the focus and the exposure.
 When the subject is focused, the focus 
indication lights.
3 Keeping the focus and the exposure 
fixed, move the camera as you compose 
the...

Page 33

Recording pictures (basic)
33VQT0P65
∫Focusing
 The focus range is 1.64 feet (50 cm) – ¶ 
(Wide), 3.94 feet (1.2 m) – ¶ (Tele).
 When you press the shutter button fully  with one stroke, pictures may be blurry or 
unfocused.
 When the focus indication is blinking, the  subject is not focused. Press the shutter 
button halfway and focus on the subject 
again.
 If the camera will not focus after a few  tries, turn it off and on and try again.
 In the following cases, the camera cannot  focus on...

Page 34

Recording pictures (basic)
34VQT0P65
∫Exposure
 If you press the shutter button halfway  when the exposure is not adequate, the 
indication of the aperture value and the 
shutter speed turns red. (However, the 
aperture value and the shutter speed do 
not turn red when the flash is activated.)
 The brightness of the LCD monitor may  differ from that of recorded pictures. The 
subject looks dark on the LCD monitor, 
but the actual picture is bright.
 When most of the subjects in the screen 
are bright...

Page 35

Recording pictures (basic)
35VQT0P65
Taking Pictures in Simple Mode
This mode allows beginners to take 
pictures easily. Only the most basic 
functions appear in the menu to make 
operations simple.
1Select the desired item and set 
the desired value.
∫ Settings in Simple mode
[PICT.MODE]
[BATTERY TYPE]
Change the type of battery you use. 
(P24)
[BEEP]
[CLOCK SET]
Change date and time. (P23)
SIMPLE MODE
BA
BEEP
CLOCK SET
PICT
EXITMENUSELECT
MENU
MENU
ENLARGE
4k6/1k15
E-MAIL
ENLARGE This selection is...

Page 36

Recording pictures (basic)
36VQT0P65
∫Other Settings in Simple mode
In Simple mode, other settings are fixed as follows. For details, refer to the pages 
corresponding to each item.
Focus range 1.64 feet (50 cm) – ¶ (Tele)
0.16 feet (5 cm) – ¶ (Wide)
MONITOR [0] (standard) P24
AUTO REVIEW [1SEC.] P24
POWER SAVE [2MIN.] P24
Self-timer 10 seconds P43
Optical Image 
Stabilizer [MODE1]
P46
Burst speed Low speed P47
Number of recordable pictures in Burst mode
DMC-LZ2:
 [ENLARGE]: max. 3 pictures
[4 qk6q/10...

Page 37

Recording pictures (basic)
37VQT0P65
∫The Backlight Compensation
Backlight is a situation where light comes 
from the back of subjects. The subjects 
such as people become dark when pictures 
are recorded in backlight. If you press  3, 
[ ] (compensating backlight ON 
indication) appears and the backlight 
compensation function is activated. This 
function compensates the backlight by 
brightening the whole of the picture.
 If you press  3 while [ ] is displayed, 
[ ] disappears and the backlight...

Page 38

Recording pictures (basic)
38VQT0P65
Checking the Recorded Picture (Review)
1Press 4.
 The last recorded picture appears for 
about 10 seconds.
 Press the shutter button halfway or  4 
to cancel the review.
 You can check other pictures by  pressing  2/1 .
 When the recorded pictures are too  bright or dim, compensate the 
exposure. (P44)
2 Enlarge and shift the picture.
:1 k> 4k> 8k
:8 k>4k> 1k  When you change the magnification or 
the position to be displayed, the zoom 
position indication  A...

Page 39

Recording pictures (basic)
39VQT0P65
Using the Optical Zoom
You can make people and subjects appear 
closer with the 6 times optical zoom, and 
landscapes can be recorded in wide angle.
∫ To make subjects appear further away 
use (Wide)
∫ To make subjects appear closer use 
(Tele) The optical zoom is set to Wide (1 k) 
when the camera is turned on.
 The picture may have some distortion  (typical example: vertical straight line bent 
outwards). This is due to the lens 
aberration, which is common to...

Page 40

Recording pictures (basic)
40VQT0P65
Taking Pictures using the Built-in Flash
When you set the flash, you can take 
pictures using the built-in flash according to 
the recording condition.
A:Photo flash
Do not cover it with your finger or any other 
items.
∫ Switching to the appropriate flash 
setting
For the selectable flash settings, refer to 
“Available flash settings by recording 
mode” on P41.
:AUTO
The flash is automatically activated 
according to the recording condition.
: AUTO/Red-eye reduction...
Start reading Panasonic Digital Camera Dmc Lz2pp Operating Instructions

Related Manuals for Panasonic Digital Camera Dmc Lz2pp Operating Instructions

All Panasonic manuals