Panasonic Digital Camera Dmc Lz20 Owners Manual For Advanced Features

							- 91 -VQT4K59
Using the [Playback] menu
[Copy]
You can copy pictures between built-in memory and memory card.
Use cursor button to select the copy method (direction) and 
press [MENU/SET]
:  Copy all pictures from built-in memory to card (go to step ).:  Copy 1 picture at a time from card to built-in memory.
Select picture with cursor button and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
 
•T o cancel → Press [MENU/SET].
 • After all the pictures are copied from the built-in memory to the memory card, the  display returns automatically to the playback screen.
 ●Copying pictures may take several minutes. Do not turn off power or perform other 
operations during copying.
 ●If identical names (folder/file numbers) are present in the copy destination, a new 
folder for copying will be created when copying from built-in memory to card (). 
Identically-named files will not be copied from card to built-in memory (). ●The following setting is not copied. Set it again after copying:
- [Protect]
 ●Only pictures from Panasonic digital cameras (LUMIX) may be copied.
 • For [Playback] menu display and operation methods (→42) 
						

							- 92 -VQT4K59
Viewing on TV screen
Connecting with other devices
You can view pictures on a TV screen by connecting your camera to your TV with the AV 
cable (supplied).
 ●Do not use any other AV cables except the supplied one. Doing so may cause 
malfunction of the camera.
Getting Ready:  • Set [TV Aspect]. (→48)
 
•T urn off both camera and TV.
Connect camera to TV
Check the plug direction and insert it 
straight in. (Damage to plug can lead to 
faulty operation.)
AV cable 
(always use cable supplied) White: 
To audio socket Yellow:  
To video socket
Turn on TV
 ●Set to auxiliary input.
Turn on camera
Press the Playback button
(Continued on the next page) 
						

							- 93 -VQT4K59
Viewing on TV screen
 
■When TVs, DVD recorders or Blu-ray disc recorders have an SD card 
slot
Insert the SD Memory Card into the SD card slot
 
•Y ou may not be able to play back panorama and motion pictures. Also you cannot 
perform automatic scrolling playback of panorama pictures. 
 • When using both SDHC and SDXC Memory Cards, be sure to play each type of card  in equipment compatible with the particular format.
 ●Also consult TV operating manual. ●You can play back pictures on TVs in other countries (regions) which use the NTSC or 
PAL system when you set [Output] in [Setup] menu. (→48) (DMC-LZ20PU only.)
 ●Change picture mode settings on TV if aspect ratios are not displayed correctly on 
widescreen or high-definition televisions.
 ●The camera speaker will not emit any sound and the monitor will not display pictures. 
						

							- 94 -VQT4K59
Using with your PC
Still/motion pictures can be copied from the camera to your computer by connecting the 
two together. • Some computers can read directly from the camera’s memory card.  For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards a message will be displayed  requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following support website. 
http://panasonic.net/avc/sdcard/information/sdxc.html
 
•Y ou can use pictures copied to your computer for printing, attaching them to e-mail, or 
other operation. The “PHOTOfunSTUDIO” software on the CD-ROM (supplied) enables 
you to perform these functions easily.
 
■Computer specifications
You can connect the camera to a computer that can detect a mass storage device 
(device that stores a large volume of data).
 • Windows: Windows 7 / Windows Vista / Windows XP
 • Mac: OS X10.1 - 10.7 
						

							- 95 -VQT4K59
Using with your PC
Using the supplied software
The supplied CD-ROM contains the following software. 
Install the software on your computer before using.
 
■PHOTOfunSTUDIO 8.2 LE (Windows XP / Vista / 7)
This software allows you to acquire pictures to the PC, and also categorise these
acquired pictures by their recording date or the model name of the camera used. You 
can write pictures to a DVD, create a Slide Show using your preferred music or effects 
and so on before saving it to a DVD.
 
■LoiLoScope 30 day full trial version (Windows XP / Vista / 7)
LoiLoScope is a video editing software that draws out the full power of your PC. 
Creating videos is as easy as organising cards on top of a desk. Use your music, 
picture and video files to create videos to share with your friends and family by burning 
it to a DVD, uploading it to websites, or simply share your videos with your friends via 
e-mail.
 • This will only install a shortcut to the trial version download site.
For more information on how to use LoiLoScope, read the LoiLoScope 
manual available for download at the link below. 
Manual URL: http://loilo.tv/product/20 
						

							- 96 -VQT4K59
Using with your PC
Installing supplied software (PHOTOfunSTUDIO)
Before inserting the CD-ROM, close all running applications.
Check the environment of your PC
Operating environment of PHOTOfunSTUDIO 8.2 LE
OSWindows XP (32 bit) SP3
Windows Vista (32 bit) SP2
Windows 7 (32 bit/64 bit) and SP1
CPU Windows XP Pentium III 500 MHz or higher
Windows Vista Pentium III 800 MHz or higher
Windows 7 Pentium III 1 GHz or higher
Display 1024x768 pixels or more 
(1920x1080 pixels or more recommended)
RAM Windows XP
512 MB or more
Windows Vista
Windows 7 1 GB or more (32 bit) 
2 GB or more (64 bit)
Free hard disk space 450 MB or more for installing software
 • Refer to the Operating Instructions of “PHOTOfunSTUDIO” (PDF) for further  information about the operating environment.
Insert the CD-ROM with the supplied software
 • When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu
Click on the [Recommended Installation]
 • Proceed with installation according to messages appearing on the screen.
 ●The software compatible with your PC will be installed. ●PHOTOfunSTUDIO is not compatible with Mac. 
						

							- 97 -VQT4K59
Using with your PC
Copying still pictures and motion pictures
Getting Ready: • Use batteries with sufficient power. 
 • When importing pictures from the built-in memory, remove any memory cards.
 
•T urn on the camera and computer.
Connect camera to computer
Check the plug direction and insert it straight in. 
(Damage to plug can lead to faulty operation.)
[Access] (sending data)  • Do not disconnect the USB connection 
cable while [Access] is 
displayed. USB connection cable
(always use cable supplied)
Use cursor button on the camera to select [PC], and press 
[MENU/SET]
Operate with your computer
 
•Y ou can save pictures to use on your computer by dragging and dropping folders 
and files into separate folders on your computer.
 ●Do not use any other USB connection cables except the supplied one. Doing so may 
cause malfunction of the camera.
 ●Turn off power before inserting or removing memory cards. ●If the batteries run out while transmitting, a warning beep sounds. Cancel 
communication via your computer immediately. Use batteries with sufficient power.
 ●For more details, consult your computer operating manual. 
						

							- 98 -VQT4K59
Using with your PC
*
  New folders are created in the following cases:  • When pictures are taken to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example, pictures taken with other cameras, etc.).
 
■To cancel connection
 • Windows: Execute “Safely Remove Hardware” on the taskbar
 • Mac: Open the Finder and click the eject icon that appears on the sidebar
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if you select [PictBridge(PTP)] in 
the step  on the previous page.
 • Only picture output can be performed.
 • It may not be possible to import if there are 1000 or more pictures on the card.
 
■Folder and file names on computer
DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
  :P1000999.JPG
101_PANA
  :                      *999_PANA
MISC
 
●Windows
Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
●Mac
Drives are displayed on 
the desktop.
(Displayed as “LUMIX”, 
“NO_NAME”, or 
“Untitled”.)
JPG: Still pictures
MOV: Motion Pictures 
						

							- 99 -VQT4K59
Printing
You can connect directly to a PictBridge-compatible printer for printing. • Some printers can print directly from the camera’s memory card. For details, see the manual for your printer.
Getting Ready:  • Use batteries with sufficient power.
 • When printing pictures from the built-in memory, remove any memory cards.
 • Adjust the print quality or other settings on your printer, as needed.
 
•T urn on the camera and printer.
Connect camera to printer
Check the plug direction and insert it straight in. 
(Damage to plug can lead to faulty operation.)
Do not disconnect the USB connection 
cable when the cable disconnection icon 
 is displayed (may not be displayed with 
some printers). USB connection cable
(always use cable supplied)
Use cursor button on the camera to select [PictBridge(PTP)], 
and press [MENU/SET]
Use cursor button to select a picture to print and press 
[MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→101))
 
■To cancel print    Press [MENU/SET].
(Continued on the next page) 
						

							- 100 -VQT4K59
Printing
 ●Do not use any other USB connection cables except the supplied one. Doing so may 
cause malfunction of the camera.
 ●Disconnect USB connection cable after printing. ●Turn off power before inserting or removing memory cards. ●If the batteries run out while transmitting, a warning beep sounds. Cancel printing and 
disconnect USB connection cable. Use batteries with sufficient power.
 ●Motion pictures cannot be printed.
Printing multiple pictures
Connect camera to printer 
 • Do not use any other USB connection cables except the supplied one. Doing so may cause malfunction of the camera.
Use cursor button on the camera to select [PictBridge(PTP)], 
and press [MENU/SET]
Press 
Use cursor button to select item and press [MENU/SET]
 •[Multi Select]:           Scroll between pictures with cursor button, select pictures 
to print with the [DISP.] button. (Press [DISP.] button again 
to release selection.)
                            
  Press [MENU/SET] when selection is complete.
 • [Select All]:            Print all pictures.
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→101))
 • Select [Yes] if print confirmation screen is displayed.
 ●An orange “●” displayed during printing indicates an error message.  ●Print may be divided into several pictures if printing a large amount of pictures.
(Remaining sheets display may differ from the number of pictures set for printing.)