Panasonic Digital Camera Dmc Lz20 Owners Manual For Advanced Features

- 41 -VQT4K59
Deleting pictures
To delete multiple (up to 50)/To delete all pictures
Press to delete displayed picture
Use   to select [Delete Multi]/[Delete All] and press 
[MENU/SET]
 
■[Delete Multi]
Use cursor button to select picture and press [DISP.] button
 
•T o cancel → Press [DISP.] button again.
 
•T o execute → Press [MENU/SET].
 Picture selected
 
•A  confirmation screen is displayed. Select [Yes] with cursor button and then press 
[MENU/SET]. 
 • May take time depending on number of...

- 42 -VQT4K59
Setting the menu
Refer to the procedure below for an example on how to operate the menus.
Example:  Changing [AF Mode] in the [Rec] menu in [Program AE] Mode
Press [MENU/SET]
The menu selection screen is displayed.
Press   to select [Rec] menu and press 
[MENU/SET]
Press   to select [AF Mode] and press 
[MENU/SET]
:  Pages
The pages can also be selected with the zoom lever.
: Menu description: Menu items: Operation guide
Press   to select a setting, and then press 
[MENU/SET]
The selected...

- 43 -VQT4K59
Setting the menu
Menu type
[Rec] menu(In recording mode only)
Changing picture preferences (→73) • Enables you to set the coloring, picture size, and other items.  
[Setup] menuMaking the camera more convenient to use (→45) • Enables you to specify clock settings, sound volume, and so on to make the camera easier to use.
[Playback Mode] menu(In playback mode only)
Viewing recorded pictures  (→84)
 • Enables you to see Slide Show or to display pictures separately under the selected...

- 44 -VQT4K59
Setting the menu
Using Quick menu
During recording, you can easily call some of the menu items and set them.
Press [Q.MENU] button
Press   to select a menu item
Press   to select the settings
Press [MENU/SET]
 ●The menu items and setting items that are displayed differ depending on the recording 
mode. 

- 45 -VQT4K59
Using the [Setup] menu
ItemSettings, notes
[Battery]
Specify the battery 
type so that the correct 
remaining battery power 
will be displayed. [Alkaline] /  [Ni-MH] 
Select the type of batteries used.
[Clock Set]
(→23, 24) Set time, date, and display format.
[Beep]
Change or mute the 
beep/shutter sounds. /  / : Low / High / Mute
[Volume]
Adjust volume of sound 
from speakers (7 levels). [0] / [1] / [2] / [3] / [4] / [5] / [6]
 • Cannot be used to adjust TV speaker volume when connected to...

- 46 -VQT4K59
Using the [Setup] menu
ItemSettings, notes
[LCD Mode]
Make LCD monitor easier 
to see. [Auto Power LCD]: The brightness is adjusted automatically depending on 
how bright it is around the camera.
 [Power LCD]:Makes screen brighter than normal (for outdoor use).
 [High Angle]: Makes the LCD monitor screen easier to see when the 
camera is held above eye level.
[OFF]
 • Cannot select [Auto Power LCD] and [High Angle] in playback mode.
 • [Power LCD] returns to ordinary brightness if there is...

- 47 -VQT4K59
Using the [Setup] menu
ItemSettings, notes
[Histogram]
Check brightness in 
picture on graph. [ON] / [OFF]
A peak in the center 
represents correct 
brightness (correct 
exposure). This can be 
used as a reference for 
exposure correction, etc.(Example)
Dark ← OK → Bright
 • Histogram from time of recording is different to Histogram 
in playback and displayed in orange, when recording with 
flash or in dark locations. Also, Histogram may differ from 
Histograms made with image editing...

- 48 -VQT4K59
Using the [Setup] menu
ItemSettings, notes
[Auto Review]
Automatically display 
still pictures immediately 
after taking them. [ON] / [OFF]
 • Automatically displays still pictures immediately after they are taken, regardless of [Auto Review] setting in 
[Auto Bracket] and [Burst] modes.
 • Motion pictures cannot be automatically reviewed.
[Reset]
Reset to the default 
settings. [Reset Rec. settings?]
[Reset setup parameters?]
 • When [Setup] settings are reset, [Age] setting in [Baby]...

- 49 -VQT4K59
Using the [Setup] menu
ItemSettings, notes
[Version Disp.]Current version is displayed.
[Format]
Use when [Built-In 
Memory Error] or 
[Memory Card Error] 
appears, or when 
formatting the built-in 
memory or card. 
When a card/built-in 
memory is formatted, 
the data cannot be 
restored. Check the 
content of the card/
built-in memory 
carefully before 
formatting.  • Use batteries with sufficient power. When formatting the 
built-in memory, remove the cards. 
(Only inserted card will be...

- 50 -VQT4K59
Changing recording information display
Application (Record)
Change between different LCD monitor displays, such as Histograms.
 
■In Recording Mode
Recording  
information * No display
Guide lines*
 
■In Playback Mode
Picture  
information Recording  
information *
No display
*  Set [Histogram] to display a histogram. (→47)
Press [DISP.] button to change display
 ●During Playback Zoom, Motion Picture Playback, Slide Show:  
You can only turn on and turn off the display.
 ●During menu...