Panasonic Digital Camera Dmc Lz1pp Lz2pp Operating Instructions

							Playback (advanced)
81VQT0P65
Use this function when you want to copy 
recorded picture data from the built-in 
memory to the card and vice versa.
1Select the direction to copy the 
picture data.
:
All pictures are copied from the built-in 
memory to the card at one time.
(Proceed to step 3.)
:
Pictures are copied from the card to the 
built-in memory one by one.
(Follow the procedure from step 2.)
2Select pictures to be copied and 
set them.
 When you copy pictures from the 
built-in memory to the card, all pictures 
are selected at one time and this screen 
does not appear.
3Select [YES] and set it.
(The illustration is the screen when 
pictures are copied from the built-in 
memory to the card.)
 When you copy pictures from the card 
to the built-in memory, the message 
[COPY THIS PICTURE TO BUILT-IN 
MEMORY?] appears.
 If you turn the camera off or operate for 
other functions before the copy is 
completed, the data in the built-in 
memory or the card may be damaged 
or lost.
Copying Picture Data [COPY]
PLAY2/2
RESIZE
FORMAT AUDIO DUB.
EXITMENUSELECT
TRIMMING
COPY
EXITMENU
COPY
SELECT
SET
2560100_
00011/5
COPY
EXITMENU
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD ?
SELECT SET
YESNO
LZ2_1PP.book  81 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
82VQT0P65
 If you copy the data from the built-in 
memory to the card, we recommend using 
a card which has more free space than 
the built-in memory (about 14 MB).
 If a picture having the same name as the 
name of picture to be copied exists in the 
copy destination, the picture will not be 
copied.
 When you copy the data from the built-in 
memory to the card and if the free space 
on the destination recording medium is 
not sufficient, the picture data can only be 
copied halfway.
 DPOF settings on the original picture data 
will not be copied. Set DPOF settings 
again after the copy is completed. (P73)
 Only files conforming to DCF standard 
(P49, 75) can be copied. (Files which do 
not conform to DCF standard cannot be 
copied.)
 It may take time to copy the data.
 Pictures which are recorded or edited with 
other equipment may not be copied.
1Select [YES] to format the 
medium.
(The illustration is the screen when the 
built-in memory is formatted.)
 When a card is not inserted, you can 
format the built-in memory. When a 
card is inserted, you can format the 
card.
Initializing the Built-in Memory/
the Card [FORMAT]
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
SELECT
SET
YESNO
FORMAT
LZ2_1PP.book  82 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
83VQT0P65
 Usually, it is not necessary to format the 
built-in memory and the card. Format 
them when the message [BUILT-IN 
MEMORY ERROR] or [MEMORY CARD 
ERROR] appears.
 If the built-in memory or the card has been 
formatted by a PC or other equipment, 
format it on the camera again.
 Once the built-in memory or the card is 
formatted, all data including protected 
images are irretrievably erased. Please 
confirm that all data is transferred to 
your PC before proceeding with format 
function.
 During formatting, do not turn the camera 
off.
 When you format the built-in memory or 
the card, use batteries with sufficient 
battery power (P14) or AC adaptor 
(DMW-AC1; optional).
 When the SD Memory Card Write-Protect 
switch is slid to [LOCK], you cannot format 
the card.
 It may take longer to format the built-in 
memory than the card. (Max. about 
15 sec.)
 If the built-in memory or the card cannot 
be formatted, consult your nearest 
servicenter.
For USA assistance, please call: 1-800-272-7033 
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
LZ2_1PP.book  83 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Playback (advanced)
84VQT0P65
Playing Back Pictures on a TV Screen
∫Playing back pictures with the 
supplied cable
The procedure for DMC-LZ2 is described 
below. In the case of DMC-LZ1, connect 
the TV and the [V.OUT] terminal on the 
camera with the video cable (supplied).
 Turn the camera and the TV off.
1Connect the AV cable A 
(supplied) to the [AV OUT] socket 
of the camera.
 Connect the AV cable with the [ ] 
mark facing the [1] mark on the 
[AV OUT] socket.
 Hold the plug B to push into or pull out.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3Turn the TV on and select external 
input.
4Turn the camera on and then set 
the mode dial to playback mode 
[].
∫Viewing pictures in other countries
When setting [VIDEO OUT] on the 
[SETUP] menu, you can view images on 
the TV in other countries (regions) which 
use the NTSC or PAL system.
 Even if you set menu selection for 
[VIDEO OUT] to [PAL], the output signal is 
still NTSC in the recording mode.
∫Playback pictures on TV with SD 
Memory Card slot
A recorded SD Memory Card can be 
played back on TVs with an SD Memory 
Card slot.
If you play back pictures recorded using 
[HDTV] mode on a High-Definition TV, 
(HDTV has 16:9 aspect) the picture quality 
will be better.
(MultiMediaCard may not be played back 
on TV with SD Memory Card slot.)
 Do not use any other AV cables 
(DMC-LZ2)/video cables (DMC-LZ1) 
except the supplied one.
 Read the TV operating instructions too.
 Audio playback is in monaural.
(DMC-LZ2 only)
DIGITAL
AV OUTDC IN3V
LZ2_1PP.book  84 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
85VQT0P65
Connecting to a PC or Printer
Before Connecting to the PC or the Printer
[ : USB MODE]
Select the USB communication system 
before connecting the camera to your PC or 
your printer with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the 
[SETUP] menu. (P24)
1Select [USB MODE].
2Select [PC] or [PictBridge (PTP)].
 If you connect the camera to a PC, 
select [PC]. (P86)
 If you connect the camera to a printer 
supporting PictBridge, select 
[PictBridge (PTP)]. (P88)
 When [PC] is selected, the camera is 
connected via USB Mass Storage 
communication system.
 When [PictBridge (PTP)] is selected, the 
camera is connected via PTP (Picture 
Transfer Protocol) communication system.
SETUP2/3
NO.RESET
VIDEO OUT CLOCK SET
RESET
SELECT
EXITMENU
MENU
NTSCPCUSB MODE
USB MODE
SELECTSET
PictBridge
(
PTP)
PC
MENU
LZ2_1PP.book  85 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
86VQT0P65
Connecting to a PC
If you use Windows® 98/98SE, install the 
USB driver and then connect it to the 
computer.
(When using Windows Me/2000/XP, Mac 
OS 9.x, Mac OS X, you do not have to 
install the USB driver. Refer to the separate 
operating instructions about PC connection 
for the installation of the USB driver.)
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC1; optional)
1Turn the camera on and then set 
[USB MODE] on the [SETUP] 
menu to [PC]. (P85)
 If you set [USB MODE] to [PictBridge 
(PTP)] and then connect the camera to 
the PC, messages may appear on the 
screen of the PC.Select [Cancel] to close the indications 
and disconnect the camera from the 
PC. Connect the camera after you set 
[USB MODE] again.
2Connect the camera to a PC via 
the USB connection cable A 
(supplied).
 Connect the USB connection cable with 
the [ ] mark facing the [1] mark on 
the [DIGITAL] socket.
 Hold the plug C to push into or pull out.
D: This message appears during data 
transfer.
[Windows]
The drive appears on the [My Computer] 
folder.
 If it is the first time you are connecting the 
camera to a PC, the required driver is 
installed automatically so that the camera 
can be recognized by the Windows Plug 
and Play, then it appears on the 
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
 When you connect the camera with the 
card inserted, the drive is shown on the 
screen as untitled.
 When you connect the camera without the 
card (with the built-in memory used), the 
drive is titled as “LUMIX”.
DIGITAL
AV OUTDC IN3V
ACCESS
LZ2_1PP.book  86 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
87VQT0P65
∫Folder Composition
The folder structure of the built-in memory, 
the card or MultiMediaCard is displayed as 
the illustration below.
1Folder number
2File number
3JPG: pictures
MOV: motion images
Files will be saved in each folder as follows.
 When recording, up to 999 picture data 
can be included in 1 folder. If the number 
of picture data exceeds 999, another 
folder will be created.
 When you reset the file number or the 
folder number, select [NO.RESET] in the 
[SETUP] menu. (P24)
 If the remaining battery power is 
exhausted during communication, the 
recorded data may be damaged. When 
you connect the camera to the PC, use 
batteries with sufficient battery power 
(P14) or the AC adaptor (DMW-AC1; 
optional). If the remaining battery power becomes 
low during communication, the status 
indicator blinks and the alarm beeps. In 
this case, stop the communication at 
once.
 While [ACCESS] is being displayed, do 
not disconnect the USB connection cable.
 When the OS of your PC is Windows 
2000 and you connect the camera to 
the PC with the USB connection cable, 
do not replace the card with the 
camera connected to the PC. The 
information in the card may be 
damaged.
 Do not use any other USB connection 
cables except the supplied one.
 For more information, refer to the separate 
operating instructions about PC 
connection.
 Also refer to the operating instructions of 
the PC.
 If the card is not inserted when the 
camera is connected to a PC, you can edit 
or access the picture data in the built-in 
memory. If the card is inserted, you can 
edit or access the picture data in it.
 You cannot switch the recording medium 
between the built-in memory and the card 
while the camera is connected to the PC. 
When you want to switch the recording 
medium, disconnect the USB connection 
cable, insert (or remove) the card and 
then connect the USB connection cable to 
the PC again.
∫PictBridge (PTP) setting
Even if you set the [USB MODE] to 
[PictBridge (PTP)], you can connect to the 
PC only when the OS is Windows XP 
Home Edition, Windows XP Professional or 
Mac OS X.
 You can only load pictures from the 
camera and cannot write them on the card 
or delete them.
 When there are 1000 or more pictures on 
a card, the pictures may not be imported. DCIM Folders from [100_PANA] to 
[999_PANA]
100_PANA Pictures/motion images
MISC Files on which the DPOF 
print settings are recorded
100_PANA
101_PANA
999_PANA DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
≥Built-in memory
≥SD Memory Card
≥MultiMediaCard
1
23
LZ2_1PP.book  87 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
88VQT0P65
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing 
on the LCD monitor.
Set the print settings such as print quality 
on the printer beforehand. (Read the printer 
operating instructions.)
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC1; optional)
1Turn the camera on and then set 
[USB MODE] on the [SETUP] 
menu to [PictBridge (PTP)]. (P85)
2Turn on the printer.
3Connect the camera to a printer 
via the USB connection cable A 
(supplied).
 Connect the USB connection cable with 
the [ ] mark facing the [1] mark on 
the [DIGITAL] socket.
 Hold the plug C to push into or pull out.
 It may take time to print some pictures. 
Therefore, use batteries with sufficient 
battery power (P14) or the AC adaptor 
(DMW-AC1; optional) when you connect 
to a printer.
 If the remaining battery power becomes 
low during communication, the status 
indicator blinks and the alarm beeps. In 
this case, stop the communication at 
once.
 Disconnect the USB connection cable 
after printing.
 Do not use any other USB connection 
cables except the supplied one.
 If the card is not inserted when the 
camera is connected to a printer, you can 
edit or access the picture data in the 
built-in memory. If the card is inserted, you 
can edit or access the picture data in it.
 You cannot switch the recording medium 
between the built-in memory and the card 
while the camera is connected to the 
printer. When you want to switch the 
recording medium, disconnect the USB 
connection cable, insert (or remove) the 
card and then connect the USB 
connection cable to the printer again.
DIGITAL
AV OUTDC IN3V
When the DPOF 
Print is not set.Select [SINGLE 
PICTURE]. (P89)
When the DPOF 
Print is set. (P73)Select [DPOF 
PICTURE]. (P90)
LZ2_1PP.book  88 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
89VQT0P65
∫Single picture
1Select a picture to be printed.
 A message disappears in about 
2 seconds.
2Set the print settings.
 The items which are not supported by 
the printer are displayed in gray and 
cannot be selected.
 When you want to print pictures in a 
paper size or a layout which is not 
supported by the camera, set [PAPER 
SIZE] or [PAGE LAYOUT] to [ ] and 
then set the paper size or the layout on 
the printer. (For details, refer to the 
operating instructions of the printer.)
 [PRINT WITH DATE]
 If the printer does not support date 
printing, the date cannot be printed on the 
picture.
 [NUM. OF PRINTS]
Set the number of prints.
[PAPER SIZE]
(Possible paper sizes on the camera)
The items are listed on 1/2 and 2/2. Press 
4 to select the desired item.
¢These items cannot be displayed when 
the printer does not support the paper 
sizes.
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
PRINTSELECT
100_
00011/5
2560
CANCELMENU
PAPER SIZE
PAGE LAYOUT NUM. OF PRINTS
PRINT START SINGLE PICTURE
OFF
ONPRINT WITH DATE
SELECTSET
Settings on the printer are 
prioritized.
OFF Date is not printed.
ON Date is printed.
1/2
Settings on the printer are 
prioritized.
L/3.5qk5q
89 mmk127 mm
2L/5qk7q127 mmk178 mm
POSTCARD 100 mm
k148 mm
A4 210 mm
k297 mm
2/2¢
CARD SIZE54 mmk85.6 mm
10k15cm 100 mmk150 mm
4q
k6q101.6 mmk152.4 mm
8q
k10q203.2 mmk254 mm
LETTER 216 mm
k279.4 mm
LZ2_1PP.book  89 ページ  ２００５年１月１４日　金曜日　午前７時５６分 
						

							Connecting to a PC or Printer
90VQT0P65
 [PAGE LAYOUT]
(Possible layouts on the camera)
3Select [PRINT START] and then 
print out the picture.
 Press the [MENU] button to cancel 
printing.
∫DPOF picture
 Set the DPOF print with the camera in 
advance. (P73)
1Select [DPOF PICTURE].
 When printing under the new settings, 
disconnect the USB connection cable 
and connect it to the printer again.
 You can change the DPOF print setting 
by pressing the [MENU] button. (P73)
2Select [PRINT START] and then 
print out the picture.
 Refer to P89 for print setting.
 Press the [MENU] button to cancel 
printing.
Settings on the printer are 
prioritized.
1 page with no frame print
1 page with frame print
2 pages print
4 pages print
CANCELMENU
PAPER SIZE
PAGE LAYOUT NUM. OF PRINTS PRINT START
SELECT
1PRINT WITH DATE
SINGLE PICTURESELECTSET
DPOF PICTURESINGLE PICTURE
PictBridge
CANCELMENU
PAGE LAYOUT PRINT START
SELECT
PAPER SIZE
DPOF
LZ2_1PP.book  90 ページ  ２００５年１月１４日　金曜日　午前７時５６分