Panasonic Digital Camera Dmc Lx7 Owners Manual For Advanced Features

Others
Message displays
- 211 -VQT4J11
Meanings of and required responses to major messages displayed on LCD monitor.
[This memory card cannot be used]
 ●A MultiMediaCard was inserted.  → 
 Not compatible  with the camera. Use a compatible card.
[Some pictures cannot be deleted]     [This picture cannot be deleted]
 ●Non-DCF pictures  (→152) cannot be deleted. → 
 Save needed da ta on a computer or other device, and then use [Format] on the camera.  (→42)
[No additional selections can be made]
 ●The...

Others
Message displays
- 212 -VQT4J11
[Memory card parameter error]
 ●Card is not of SD standard. ●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are 
supported.
[Read Error] / [Write Error]     [Please check the card]
 ●Data read has failed. →  Check whether card has been insert ed correctly (→18).
 ●Data write has failed. →  Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
 ●Card may possibly be damaged. ●Try with a different...

Others
Q&A  Troubleshooting
- 213 -VQT4J11
Before asking for repairs, check and try the following procedures.
A message is displayed on the camera(→211)
Battery-and power supply-related problems(→214)
Recording-related problems(→214)
LCD monitor-related problems(→217)
Playback-related problems(→218)
Other problems(→219)
If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue  
(→39). Note that except for some items such as [Clock Set], all settings are returned to 
their...

Others
Q&A  Troubleshooting
- 214 -VQT4J11
Battery, power
Camera does not work even if power is turned on. ●Battery is not inserted correctly (→18), or needs recharging.
LCD monitor shuts off even if power is turned on.
Camera switches off as soon as power is turned on.
 ●[Opt. Viewfinder] is set to [ON]. →  Press [DISP .] button to switch to the LCD monitor display.
 ●The Live View Finder (optional) display is selected. →  Press the [L VF/LCD] button of the Live View Finder (optional) to switch to the...

Others
Q&A  Troubleshooting
- 215 -VQT4J11
Recording (continued)
Cannot use [WB Bracket]. ●Built-in memory/card is full. → Free space by deleting unwanted pictures (→163).
Recorded pictures appear coarse, or there is interference. ●ISO Sensitivity is high, or shutter speed is low. (Default [Sensitivity] setting is [AUTO] – interference may appear with indoor pictures.)
 → 

 
Lowe
 r [Sensitivity]  (→109).
 →  T

ake pictures in brighter locations.
Striping or flicker may appear under lighting such as...

Others
Q&A  Troubleshooting
- 216 -VQT4J11
Recording (continued)
The subject appears distorted. ●An MOS is used as the imaging device for this unit, so if the subject passes quickly in front of the 
lens, it will appear slightly distorted. Note, however, that this does not indicate a malfunction.
An unusual noise, such as a clicking or buzzing noise, is recorded on a motion picture.
The audio level is extremely low.
 ●When recording a motion picture in a quiet environment, noise due to the motion of the...

Others
Q&A  Troubleshooting
- 217 -VQT4J11
LCD monitor 
No picture is displayed on the LCD monitor. ●[Opt. Viewfinder] is set to [ON]. →  Press [DISP .] button to switch to the LCD monitor display.
 ●The Live View Finder (optional) display is selected. →  Press the [L VF/LCD] button of the Live View Finder (optional) to switch to the LCD monitor 
display.
Brightness is unstable. ●Aperture value is set while shutter button is pressed halfway. (Does not affect recorded picture.)  
This symptom may also...

Others
Q&A  Troubleshooting
- 218 -VQT4J11
Playback
Pictures have been rotated. ●[Rotate Disp.] is activated (→40)
Cannot view pictures. There are no recorded pictures. ●No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if 
not).
 ●Has the file name of the picture been changed on a computer? If so, it cannot be played back on the 
camera.
 ●The [Playback Mode] has been changed. →  Set [Playback Mode] to [Normal Play ] (→152).
Folder/file number displayed...

Others
Q&A  Troubleshooting
- 219 -VQT4J11
TV, computer, printer
No image appears on TV. Image blurred or not colored. ●Not connected correctly (→183). ●The television has not been switched to auxiliary input. 
TV screen display different to LCD monitor. ●Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV. ●Card is inserted into TV. → 
 Conn ect with AV cable (optional) or HDMI mini cable (optional) and play on camera  (→183).
Picture is not...

Others
Q&A  Troubleshooting
- 220 -VQT4J11
TV, computer, printer (continued)
Cannot communicate with the computer. ●Not connected correctly (→191). ●Check whether computer has recognized camera. → 
 Set [USB Mode] to [PC]  (→
39).
 →  T

urn the camera off and then on again. 
Computer does not recognize card (only reads built-in memory). ●Disconnect USB connection cable and reconnect with card in place.
Computer does not recognize card. (When using an SDXC Memory Cards) →   Check whether your computer is...