Panasonic Digital Camera Dmc Lx3 Operating Instructions

111VQT1T27
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫Disconnecting the USB connection cable safely
Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the 
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of 
the digital camera before removing the hardware.
Note
Turn the camera off before connecting...

VQT1T27112
Connecting to other equipment
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures  are taken in the following situations.

After [NO.RESET]  (P26) in the [SETUP] menu has been executedWhen a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another make of camera)
When there is a picture with file number 999 inside the folder
∫Connection in the PTP mode...

113VQT1T27
Connecting to other equipment
Connect the camera to a printer via the USB connection cable A 
(supplied).
Note
Do not use any other USB connection cables except the supplied one. Use of cables other than 
the supplied USB connection cable may cause malfunction.
Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; 
optional).
Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.
You cannot switch between the built-in...

VQT1T27114
Connecting to other equipment
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites.  (P105)
Selecting a single picture and printing it
Press 2/ 1 to select the picture and then press 
[MENU/SET].
The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press 
[MENU/SET].
Refer to P115  for the items which can be set before starting to 
print the pictures.
Press [MENU/SET] to cancel printing halfway.Disconnect the USB connection cable after...

115VQT1T27
Connecting to other equipment
Select and set the items both on the screen in step 2 of the 
“Selecting a single picture and printing it ” and in step 3 of the 
“Selecting multiple pictures and printing them ” procedures.

When you want to print pictures in a paper size or a layout which is not 
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to 
[ {] and then set the paper size or the layout on the printer. (For 
details, refer to the operating instructions of the printer.)
When...

VQT1T27116
Connecting to other equipment
An item cannot be selected if the printer does not support the page layout.
∫Layout printing
When printing a picture several times on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set 
[PAGE LAYOUT] to [ ä] and then set [NUM. OF PRINTS] to 4 for the picture that you 
want to print. 
When printing different pictures on 1 sheet of paper
For example, if you want to print 4 different pictures on 1 sheet of paper, set...

117VQT1T27
Connecting to other equipment
1Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the AV cable  B (supplied) to the video input and the audio 
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and...

VQT1T27118
Connecting to other equipment
You can enjoy high quality pictures and motion pictures on the TV by connecting the 
camera with the TV using component cable (DMW-HDC2: optional).
Component output is output as 1080i. Connect with a TV compatible with the 1080i.
Note

Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left 
and right of the pictures.
Do not use any other cables except a g enuine Panasonic component cable (DMW-HDC2; 
optional).
Audio will be...

119VQT1T27
Connecting to other equipment
When pictures are displayed, they may not be displayed properly depending on the type of TV.Read the operating instructions for the TV.
Using the Conversion Lens (optional)
When the wide conversion lens is used, it is possible to achieve a wider field of view in 
pictures of landscapes or the like.
Refer to  P90 for details.
Preparations: Turn off the camera and remove the lens cap.
Remove the lens ring front.
Be careful not to lose the lens ring front.
Attach the...

VQT1T27120
Connecting to other equipment
Select [CONVERSION] on the [REC] menu.
Refer to P90 for [CONVERSION].
Press 3/4 to select [ ], and then press [MENU/SET] to set. 
Note
When there is dirt (water, oil, and fingerprints , etc.) on the surface of the lens, the image may 
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking 
pictures.
When the wide conversion lens is removed, set [CONVERSION] to [OFF].When you take pictures at close range, the re solution of...