Home > Panasonic > Digital Camera > Panasonic Digital Camera Dmc Lx2 Operating Instructions

Panasonic Digital Camera Dmc Lx2 Operating Instructions

Here you can view all the pages of manual Panasonic Digital Camera Dmc Lx2 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.

Page 121

Others
121VQT0Y44
[MEMORY CARD ERROR 
PLEASE CHECK THE CARD]
• Failed access to the card.
Insert the card again.
[READ ERROR 
PLEASE CHECK THE CARD]
Data reading error.
Insert the card again. Make sure the card is 
inserted properly and then play back again.
[WRITE ERROR 
PLEASE CHECK THE CARD]
Data writing error.
Turn the camera off and remove the card. 
Then insert the card and turn the camera 
on again. Be sure that the camera is turned 
off before removing or inserting the card to 
avoid damage. This...

Page 122

Others
122VQT0Y44
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be 
improved. Carry out the [RESET] in the setup menu. (P24)
nBattery and power supply
nShooting
ConditionsCauses
The camera will not turn 
on.
Is the battery inserted correctly? Check the direction of the battery.
Is the battery sufficiently charged?
Use a battery that has been sufficiently charged.
The picture is not 
displayed on the LCD 
monitor.
Is the power save mode (P23) or...

Page 123

Others
123VQT0Y44
nLCD
ConditionsCauses
Images are grainy or 
noisy.
Is the ISO sensitivity high or the shutter speed slow?
(When set to [AUTO], ISO sensitivity increases for indoor and 
other shooting occasions. When set to [ ], ISO sensitivity may 
increase depending on movements and brightness of the subject.)
• Reduce ISO sensitivity. (P84)
• Set [NOISE REDUCTION] in [PICT.ADJ.] to [HIGH] or set 
every item except [NOISE REDUCTION] to [LOW]. (P91)
• Improve the ambient light.
In [HIGH SENS.] (P68) in...

Page 124

Others
124VQT0Y44
nFlash
nPlayback
ConditionsCauses
Noise appears on the 
LCD monitor.
In dark places, noise may appear to maintain the brightness of the 
LCD monitor. This does not affect the pictures you are recording.
A vertical line appears 
on the LCD monitor.This is a phenomenon called smear. It is a characteristic of 
CCD and appears when the subject has a bright part.
Uneven colors may also appear around the smear. This is not 
a malfunction. It is recorded in motion pictures but is not 
recorded...

Page 125

Others
125VQT0Y44
nConnecting to a TV, computer or printer
ConditionsCauses
Folder or file number 
appears as [–] and the 
display goes black.The picture may have been changed on a computer or taken 
on a different manufacturer’s camera. 
This problem can also occur if you remove the battery immediately 
after taking a picture or if the battery had very little charge left.
• You will need to reformat the card to delete this type of 
picture. (P106) (Remember that all data will be irretrievably 
erased...

Page 126

Others
126VQT0Y44
nOthers
ConditionsCauses
The computer does not 
recognize the card.
(The built-in memory is 
recognized.)Disconnect the USB connection cable, then insert the card 
and reconnect the cable.
The pictures cannot be 
printed with printers.Does the printer support PictBridge? You cannot print 
pictures with printers which do not support PictBridge. (P110)
Set the camera’s mode dial to Print mode (P110).
The sides of printed 
images are cut off.• If your printer has trimming and border...

Page 127

Others
127VQT0Y44
ConditionsCauses
The camera gets hot.The camera may get a little warm while you are using it, but 
this is normal.
The lens clicks.When brightness has changed due to the zoom or the 
movement of the camera or other, the lens may click and the 
picture on the screen may be drastically changed, however, 
the pictures are not affected.
The sound is caused by automatic adjustment of the 
aperture. It is not a malfunction.
The clock setting is 
reset.If you do not use the camera for a long...

Page 128

Others
128VQT0Y44
Number of recordable pictures and available 
recording time
• The number of recordable pictures and the available recording time are an approximation. 
(These vary depending on the recording conditions and the type of card.)
• The number of recordable pictures varies depending on the subjects.
nNumber of recordable pictures
Aspect ratio
Picture size : 10M (4224×2376 pixels) : 8M EZ (3840×2160 pixels)
Quality
Built-in Memory
(Approx.13 MB)140 2 5
Card
16 MB 2 5 0 2 6
32 MB5111 6 13
64 MB...

Page 129

Others
129VQT0Y44
Aspect ratio
Picture size : 8.5M (3568×2376 pixels) : 7M EZ (3248×2160 pixels)
Quality
Built-in Memory
(Approx.13 MB)250 3 6
Card
16 MB260 3 7
32 MB6131 7 16
64 MB 14 28 2 17 34
128 MB 29 58 5 35 70
256 MB 57 110 10 69 135
512 MB 110 220 21 135 270
1 GB 230 450 42 270 540
2 GB 460 910 86 560 1090
4 GB 910 1800 165 1100 2150
Aspect ratio
Picture size : 4.5M EZ (2560×1712 pixels) : 2.5M EZ (2048×1360 pixels)
Quality
Built-in Memory
(Approx.13 MB)511817
Card
16 MB512918
32 MB 13 26 20 40...

Page 130

Others
130VQT0Y44
Aspect ratio
Picture size : 7.5M (3168×2376 pixels) : 6M EZ (2880×2160 pixels)
Quality
Built-in Memory
(Approx.13 MB)260 3 7
Card
16 MB 3 6 0 3 8
32 MB7151 9 18
64 MB 15 32 2 19 38
128 MB 32 65 5 39 79
256 MB 64 125 10 78 150
512 MB 125 250 21 155 300
1 GB 250 510 42 310 610
2 GB 520 1020 87 630 1220
4 GB 1030 2010 170 1240 2410
h
7.5M6M
GHRAWGH
Aspect ratio
Picture size : 4M EZ (2304×1728 pixels) : 3M EZ (2048×1536 pixels)
Quality
Built-in Memory
(Approx.13 MB)512715
Card
16 MB 6 13 8...
Start reading Panasonic Digital Camera Dmc Lx2 Operating Instructions

Related Manuals for Panasonic Digital Camera Dmc Lx2 Operating Instructions

All Panasonic manuals