Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features
Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features
Here you can view all the pages of manual Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 31
31 Basics Adjusting the angle of the monitor You can adjust the angle of the monitor. •Be careful not to catch your finger , etc. in the monitor. •When rotating the angle of the monitor , be careful not to apply too much force. Doing so may cause damage or malfunction. (Open and close with your finger on point .) • When not using this camera, close the monitor completely back to the original position. Recording from a variety of angles The monitor can be rotated to suit your needs. This is...
Page 32
![Page 32
32
Basics
Buttons/Dials/Levers Used for Recording
Zoom Lever (Use Zoom)
You can adjust the area of a picture to be taken using the zoom lever or \
control ring. • You can also use the zoom function from the touch panel. (→143)
• For details about zoom types and use, refer to (→
140).
Zoom leverControl ring
1Move the zoom lever1Turn the control ring*
* You can perform zoom operation by assigning
the [Zoom] setting to the control ring. (→36)
T side: Telephoto, Enlarge the subject
W side: Wide-angle,...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-31.png "Page 32
32
Basics
Buttons/Dials/Levers Used for Recording
Zoom Lever (Use Zoom)
You can adjust the area of a picture to be taken using the zoom lever or \
control ring. • You can also use the zoom function from the touch panel. (→143)
• For details about zoom types and use, refer to (→
140).
Zoom leverControl ring
1Move the zoom lever1Turn the control ring*
* You can perform zoom operation by assigning
the [Zoom] setting to the control ring. (→36)
T side: Telephoto, Enlarge the subject
W side: Wide-angle,...")
32 Basics Buttons/Dials/Levers Used for Recording Zoom Lever (Use Zoom) You can adjust the area of a picture to be taken using the zoom lever or \ control ring. • You can also use the zoom function from the touch panel. (→143) • For details about zoom types and use, refer to (→ 140). Zoom leverControl ring 1Move the zoom lever1Turn the control ring* * You can perform zoom operation by assigning the [Zoom] setting to the control ring. (→36) T side: Telephoto, Enlarge the subject W side: Wide-angle,...
Page 33
![Page 33
33
Basics
Buttons/Dials/Levers Used for Recording
Shutter button (Taking pictures)
• Press the [ ] button ( ) to set the drive mode to [ ] ([Single]).
1Press the shutter button halfway (press lightly) to
focus on the subject
Focus display
(
When focus is aligned: illuminated
When focus is not aligned: flashing)
Aperture valueShutter speed
• The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing,
you do not have the...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-32.png "Page 33
33
Basics
Buttons/Dials/Levers Used for Recording
Shutter button (Taking pictures)
• Press the [ ] button ( ) to set the drive mode to [ ] ([Single]).
1Press the shutter button halfway (press lightly) to
focus on the subject
Focus display
(
When focus is aligned: illuminated
When focus is not aligned: flashing)
Aperture valueShutter speed
• The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing,
you do not have the...")
33 Basics Buttons/Dials/Levers Used for Recording Shutter button (Taking pictures) • Press the [ ] button ( ) to set the drive mode to [ ] ([Single]). 1Press the shutter button halfway (press lightly) to focus on the subject Focus display ( When focus is aligned: illuminated When focus is not aligned: flashing) Aperture valueShutter speed • The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the...
Page 34
34 Basics Buttons/Dials/Levers Used for Recording Motion picture button (Recording motion pictures) 1Press the motion picture button to start recording • Immediately release the motion picture button after pressing it. 2Press the motion picture button again to end recording Mode dial (Select the recording mode) 1Set to the desired recording mode •Rotate the mode dial slowly to select the desired mode. Intelligent Auto Mode (→50) Intelligent Auto Plus Mode (→50) Program AE Mode (→61) Aperture-Priority...
Page 35
![Page 35
35
Basics
Buttons/Dials/Levers Used for Recording
Control ring / Aperture ring / Rear dial
You can use the control ring ()/Aperture ring ()/rear dial () to change the settings of
the unit.
• You can adjust the aperture using the aperture ring. Gently turn the aper\
ture ring until it snaps into place with an audible click. (The aperture can be set betwee\
n [1.4] and [11].)
(→62, 64, 82)
• Items that can be set by the control ring/rear dial vary depending on re\
cording modes. Following are the...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-34.png "Page 35
35
Basics
Buttons/Dials/Levers Used for Recording
Control ring / Aperture ring / Rear dial
You can use the control ring ()/Aperture ring ()/rear dial () to change the settings of
the unit.
• You can adjust the aperture using the aperture ring. Gently turn the aper\
ture ring until it snaps into place with an audible click. (The aperture can be set betwee\
n [1.4] and [11].)
(→62, 64, 82)
• Items that can be set by the control ring/rear dial vary depending on re\
cording modes. Following are the...")
35 Basics Buttons/Dials/Levers Used for Recording Control ring / Aperture ring / Rear dial You can use the control ring ()/Aperture ring ()/rear dial () to change the settings of the unit. • You can adjust the aperture using the aperture ring. Gently turn the aper\ ture ring until it snaps into place with an audible click. (The aperture can be set betwee\ n [1.4] and [11].) (→62, 64, 82) • Items that can be set by the control ring/rear dial vary depending on re\ cording modes. Following are the...
Page 36
![Page 36
36
Basics
Buttons/Dials/Levers Used for Recording
Changing the settings assigned to the control ring/rear dial
Changes the settings assigned to the control ring/rear dial.
→ [Custom] → [Ring/Dial Set]
→ [
] ([Control Ring Operation]) or [ ] ([Rear Dial Operation])
[DEFLT] [Normal][Photo Style] (→170)
[Zoom]* (→140)[Filter Effect] (→172)
[Step Zoom]* (→196)[Aspect Ratio] (→173)
[Exposure Comp.] (→103)[Highlight Shadow] (→176)
[Sensitivity] (→104)[i.Dynamic] (→177)
[White Balance]...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-35.png "Page 36
36
Basics
Buttons/Dials/Levers Used for Recording
Changing the settings assigned to the control ring/rear dial
Changes the settings assigned to the control ring/rear dial.
→ [Custom] → [Ring/Dial Set]
→ [
] ([Control Ring Operation]) or [ ] ([Rear Dial Operation])
[DEFLT] [Normal][Photo Style] (→170)
[Zoom]* (→140)[Filter Effect] (→172)
[Step Zoom]* (→196)[Aspect Ratio] (→173)
[Exposure Comp.] (→103)[Highlight Shadow] (→176)
[Sensitivity] (→104)[i.Dynamic] (→177)
[White Balance]...")
36 Basics Buttons/Dials/Levers Used for Recording Changing the settings assigned to the control ring/rear dial Changes the settings assigned to the control ring/rear dial. → [Custom] → [Ring/Dial Set] → [ ] ([Control Ring Operation]) or [ ] ([Rear Dial Operation]) [DEFLT] [Normal][Photo Style] (→170) [Zoom]* (→140)[Filter Effect] (→172) [Step Zoom]* (→196)[Aspect Ratio] (→173) [Exposure Comp.] (→103)[Highlight Shadow] (→176) [Sensitivity] (→104)[i.Dynamic] (→177) [White Balance]...
Page 37
![Page 37
37
Basics
Buttons/Dials/Levers Used for Recording
Cursor button / [MENU/SET] button (Selecting/setting items)
Pressing the cursor button: Selection of items or setting of values etc., is
performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is perf
ormed.
• In this manual, the button that is to be used is indicated by . • When the [Cursor Button Lock] is assigned to the function
button, operation of the cursor button and [MENU/SET]
button can be disabled. (→46, 47)
[DISP.]...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-36.png "Page 37
37
Basics
Buttons/Dials/Levers Used for Recording
Cursor button / [MENU/SET] button (Selecting/setting items)
Pressing the cursor button: Selection of items or setting of values etc., is
performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is perf
ormed.
• In this manual, the button that is to be used is indicated by . • When the [Cursor Button Lock] is assigned to the function
button, operation of the cursor button and [MENU/SET]
button can be disabled. (→46, 47)
[DISP.]...")
37 Basics Buttons/Dials/Levers Used for Recording Cursor button / [MENU/SET] button (Selecting/setting items) Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is perf ormed. • In this manual, the button that is to be used is indicated by . • When the [Cursor Button Lock] is assigned to the function button, operation of the cursor button and [MENU/SET] button can be disabled. (→46, 47) [DISP.]...
Page 38
![Page 38
38
Basics
Buttons/Dials/Levers Used for Recording
■Using the level gauge
If you want to make sure that the camera is not slanted or tilted, for e\
xample, when you
take a picture of a landscape, use the level gauge indication as a refer\
ence.
The yellow line indicates the current angle. Correct the angle of the ca\
mera so that it
matches the white line.
Tilting up or down • In this case, it is facing upward.Tilting left or right • In this case, the right side has dropped.
• When the camera is...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-37.png "Page 38
38
Basics
Buttons/Dials/Levers Used for Recording
■Using the level gauge
If you want to make sure that the camera is not slanted or tilted, for e\
xample, when you
take a picture of a landscape, use the level gauge indication as a refer\
ence.
The yellow line indicates the current angle. Correct the angle of the ca\
mera so that it
matches the white line.
Tilting up or down • In this case, it is facing upward.Tilting left or right • In this case, the right side has dropped.
• When the camera is...")
38 Basics Buttons/Dials/Levers Used for Recording ■Using the level gauge If you want to make sure that the camera is not slanted or tilted, for e\ xample, when you take a picture of a landscape, use the level gauge indication as a refer\ ence. The yellow line indicates the current angle. Correct the angle of the ca\ mera so that it matches the white line. Tilting up or down • In this case, it is facing upward.Tilting left or right • In this case, the right side has dropped. • When the camera is...
Page 39
![Page 39
39
Basics
Touch screen (Touch operations)
Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
TouchTo touch and release the touch screen.
DragTo touch and slide your finger across the touch screen.
Pinch (spread/pinch)On the touch screen, spread (pinch out) your 2 fingers to
zoom in, and pinch (pinch in) your 2 fingers to zoom out.
●Touch the screen with the clean and dry finger. ●If you use a commercially available monitor protection sheet, please fol\
low the...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-38.png "Page 39
39
Basics
Touch screen (Touch operations)
Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
TouchTo touch and release the touch screen.
DragTo touch and slide your finger across the touch screen.
Pinch (spread/pinch)On the touch screen, spread (pinch out) your 2 fingers to
zoom in, and pinch (pinch in) your 2 fingers to zoom out.
●Touch the screen with the clean and dry finger. ●If you use a commercially available monitor protection sheet, please fol\
low the...")
39 Basics Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. TouchTo touch and release the touch screen. DragTo touch and slide your finger across the touch screen. Pinch (spread/pinch)On the touch screen, spread (pinch out) your 2 fingers to zoom in, and pinch (pinch in) your 2 fingers to zoom out. ●Touch the screen with the clean and dry finger. ●If you use a commercially available monitor protection sheet, please fol\ low the...
Page 40
![Page 40
40
Basics
Touch screen (Touch operations)
Touching the screen and recording (Touch Shutter function)
Recording mode:
This function enables you to focus and record still pictures simply by t\
ouching the
subjects that appear on the screen.
1Touch [ ]
2Touch [ ] • The icon changes to [ ] and you can now proceed with touch
shutter recording.
3Touch the subject you want to record
■To release the touch shutter function
Touch [
]
●If shooting with the touch shutter fails, the AF area turns red and...](http://img.usermanuals.tech/thumb/58/64844/w300_dmc-lx10_en_adv_om_d-39.png "Page 40
40
Basics
Touch screen (Touch operations)
Touching the screen and recording (Touch Shutter function)
Recording mode:
This function enables you to focus and record still pictures simply by t\
ouching the
subjects that appear on the screen.
1Touch [ ]
2Touch [ ] • The icon changes to [ ] and you can now proceed with touch
shutter recording.
3Touch the subject you want to record
■To release the touch shutter function
Touch [
]
●If shooting with the touch shutter fails, the AF area turns red and...")
40 Basics Touch screen (Touch operations) Touching the screen and recording (Touch Shutter function) Recording mode: This function enables you to focus and record still pictures simply by t\ ouching the subjects that appear on the screen. 1Touch [ ] 2Touch [ ] • The icon changes to [ ] and you can now proceed with touch shutter recording. 3Touch the subject you want to record ■To release the touch shutter function Touch [ ] ●If shooting with the touch shutter fails, the AF area turns red and...