Panasonic Digital Camera Dmc Ls85 Operating Instructions

							Advanced-Viewing
61VQT1X05
You can play back the pictures you have taken in synchronization with music, and you can 
do this in sequence while leaving a fi xed interval between each of the pictures.
Furthermore, you can play back only those pictures you have set as favorites as a slide 
show.
This playback method is recommended when you have connected the camera to a TV set 
to view the pictures you have taken.
1  Slide the recording/playback switch to [ 5] and then press [MODE].
2 Press 
e/
r  to select [SLIDE SHOW] and then press 
[MENU/SET].
3 Press  e/
r  to select an item and then press 
[MENU/SET].
[ALL]: All pictures
[FAVORITE]: Pictures set as FAVORITE (P70). (Set 
[FAVORITE] to [ON] and set any pictures as 
favorites.)
4 Press e to select [START] and press [MENU/SET].
5 Press 
r to fi
 nish the slide show.
•  Normal playback resumes after the slide show fi  nishes.
Operations performed during slide show
The cursor displayed during playback corresponds to  e/
r /
w /
q .
•  The menu screen is restored when [ 4] is pressed.
A
 Play/Pause
B  Stop
C   Back to previous picture

						

							Advanced-Viewing
62VQT1X05
Changing the slide show settings
You can change the settings for slide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when 
switching from one picture to the next picture.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•  When [URBAN] has been selected, the picture may appear in black and white as a  screen effect.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item Settings
[DURATION] [1SEC.]/[2SEC.]/[3SEC.]/[5SEC.].
[REPEAT] [ON]/[OFF]
[MUSIC] [ON]/[OFF]
•  [DURATION] can be set only when [OFF] has been selected as the [EFFECT] setti\
ng.
•  [MUSIC] cannot be set when the [EFFECT] is set to [OFF].
 Note
•  It is not possible to add new music effects.
•  Motion pictures cannot be played back as a slide show. „
VQT1X05_DMC-LS85_P-PC_EN.indb   62 VQT1X05_DMC-LS85_P-PC_EN.indb   62 2008/12/22   20:20:26
2008/12/22   20:20:26 
						

							Advanced-Viewing
63VQT1X05
Selecting Pictures and Playing Them Back
Playback mode: z
z [FAVORITE PLAY]
You can play back the pictures put in the favorites list only. (When [FAVORITE] is set to 
[ON] and there is more than one picture in the favorites list.)
Refer to [FAVORITE] (P70) to put a picture on your favorites list or to remove it from the 
list.
1  Slide the recording/playback switch to [
5] and then press [MODE].
2 Press 
e/
r  to select [FAVORITE PLAY] and then 
press [MENU/SET]
 Note
•  You can use only [ROTATE DISP.], [PRINT SET] or [PROTECT] in  the [PLAYBACK] menu.
VQT1X05_DMC-LS85_P-PC_EN.indb   63 VQT1X05_DMC-LS85_P-PC_EN.indb   63 2008/12/22   20:20:26
2008/12/22   20:20:26 
						

							Advanced-Viewing
64VQT1X05
Playing Back Motion Pictures
Playback mode: 9 
z
CBAPress  w/
q  to select a picture with a motion picture 
icon (such as [ -]), and then press 
e to play back.
A
  The motion picture recording time
B   Motion picture icon
C   Motion picture playback icon
•  After playback starts, the elapsed playback time is displayed on  the upper right of the screen. 
For example, 8 minutes and 30 seconds is displayed as [8m30s].
Operations performed during motion picture playback
The cursor displayed during playback corresponds to  e/
r /
w /
q .
A  Play/Pause
B  Stop
C   Fast rewind, Frame-by-frame rewind

						

							Advanced-Viewing
65VQT1X05
Using the [PLAYBACK] Menu
Playback mode: 9
You can use various functions in Playback Mode to rotate pictures, set protection for them 
etc.
•  With [TEXT STAMP] or [RESIZE], a new edited picture is created. A new picture cannot  be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
t  [CALENDAR]
You can display pictures by recording date.
1  Select [CALENDAR] on the [PLAYBACK] menu. (P18)
•  You can also rotate the zoom lever several times towards [
6] (W) to display the 
calendar screen. (P32)
2 Press  e/
r /
w /
q  to select the date to be played 
back.
e /
r : Select the month
w /
q : Select the date
•  If there were no pictures recorded during a month, the  month is not displayed.
3  Press [MENU/SET] to display the pictures that were recorded on the selected date.
•  To return to the calendar screen, press [ 4].
4 Press 
e/
r /
w /
q  to select a picture and then press [MENU/SET].
•  The picture that was selected will appear.
 Note
•  The recording date of the picture selected in the playback screen becomes the date  selected when the calendar screen is fi  rst displayed.
•  If there are multiple pictures with the same recording date, the fi  rst picture recorded on 
that day is displayed.
•  You can display the calendar between January 2000 and December 2099.
•  If the date is not set in the camera, the recording date is set as January 1st, 2009.
•  If you take pictures after setting the travel destination in [WORLD TIME], the pictures are  displayed by the dates at the travel destination in calendar playback.
VQT1X05_DMC-LS85_P-PC_EN.indb   65 VQT1X05_DMC-LS85_P-PC_EN.indb   65 2008/12/22   20:20:27
2008/12/22   20:20:27 
						

							Advanced-Viewing
66VQT1X05
y [TITLE EDIT]
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P67). (Only alphabetical characters and symbols can be 
entered.)
1  Select [TITLE EDIT] on the [PLAYBACK] menu. (P18)
2 Press 
e/
r  to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
[SINGLE] [MULTI]
Press  w/
q  to 
select the picture. Press 
e/
r /
w /
q  to 
select the pictures.
A
3  Select the picture, and then  press [MENU/SET] to set.
• [ u ] 
A  is displayed for pictures 
that have already been recorded 
with text in [BABY1]/[BABY2] or 
[PET] name settings in Scene 
Mode, [TRAVEL DATE] location 
setting or [TITLE EDIT].
For [MULTI] setting
Press [DISPLAY] to set (repeat), and then press [MENU/SET].
•  The setting is canceled when [DISPLAY] is pressed again.
4 Press  e/
r /
w /
q  to select text and press [MENU/
SET] to register.
•  Press [DISPLAY] to switch text between [A] (capitals), [a] 
(small case) and [&/1] (special characters and numbers).
•  The cursor at the entry position can be moved to the left  with [ 6], and to the right with [
7].
•  To enter a blank, move the cursor to [SPACE] and press [MENU/SET]. To delete  an entered character, move the cursor to [DELETE], and press [MENU/SET].
•  To stop editing during text entry, press [ 4].
•  A maximum of 30 characters can be entered.
5 Press  e/
r /
w /
q  to move the cursor to [EXIT] and then press [MENU/
SET] to fi  nish text input.
6 Press [
4] to return to the menu screen
						

							Advanced-Viewing
67VQT1X05
[MULTI] setting
1 In step 4
, delete all the texts, select [EXIT], and press [MENU/SET].
2  Press [MENU/SET] to close the menu.
 Note
•  Text can be scrolled if all of the registered text does not fi  t on the screen.
•  The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE]  location setting can also be registered by using the operation in steps  4
 and following.
•  The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [TRAVEL DATE]  location setting and [TITLE EDIT] cannot be registered at the same time.
•  You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on  the CD-ROM (supplied).
•  You can set up to 50 pictures at one time with [MULTI].
•  You cannot use [TITLE EDIT] for motion pictures, pictures protected and pictures taken  with other equipment.
s  [TEXT STAMP]
You can stamp the recording date/time, age, travel date or title onto the recorded pictures. 
It is suitable for regular size printing. (Pictures larger than 3M will be resized when 
stamping the date etc. on them.)
1  Select [TEXT STAMP] on the [PLAYBACK] menu. (P18)
2 Press 
e/
r  to select [SINGLE] or [MULTI] and 
press [MENU/SET].
[SINGLE] [MULTI]
Press  w/
q  to 
select the picture. Press 
e/
r /
w /
q  to 
select the pictures.
A
3  Select the picture, and then  press [MENU/SET] to set.
• [ d ] 
A  appears on the screen if 
the picture have added the text 
stamp.
For [MULTI] setting
Press [DISPLAY] to set (repeat), 
and then press [MENU/SET].
•  The setting is canceled when  [DISPLAY] is pressed again.
4 Press  e/
r /
w /
q  to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE], and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/O TIME]:  Stamp the year, month and date.
[WITH TIME]:  Stamp the year, month, day, hour and minutes.
[AGE] (P45) If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE] If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
VQT1X05_DMC-LS85_P-PC_EN.indb   67 VQT1X05_DMC-LS85_P-PC_EN.indb   67 2008/12/22   20:20:28
2008/12/22   20:20:28 
						

							Advanced-Viewing
68VQT1X05
[TITLE]Text is printed together with the image for pictures that have already been 
recorded with text in [BABY1]/[BABY2] or [PET] name settings in Scene Mode, 
[TRAVEL DATE] location setting or [TITLE EDIT].
5 Press [MENU/SET].
•  If you set [TEXT STAMP] for a picture larger than 3M, the picture size will become smaller as shown below
R/T
   C
 
Z    M
 
X    U
•  The picture becomes slightly rougher. (Example)
6 Press e to select [YES] and press [MENU/SET].
•  The message [SAVE NEW PICTURES?] appears if the 
picture was recorded with a picture size 3M or less.
7 Press [ 4] to return to the menu screen
						

							Advanced-Viewing
69VQT1X05
3  Select the picture(s) and size(s).
[SINGLE][SINGLE] setting
1 Press w/
q  to select the picture, 
and then press [MENU/SET].
2 Press  w/
q  to select the size

						

							Advanced-Viewing
70VQT1X05
k [ROTATE DISP.]
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically.
1  Select [ROTATE DISP.] on the [PLAYBACK] menu. (P18)
2 Press 
r to select [ON] and then press [MENU/
SET].
•  When you select [OFF], the pictures are displayed without 
being rotated.
•  Refer to P32 for information about how to play back  pictures.
3  Press [MENU/SET] to close the menu.
 Note
•  When you play the picture on a PC, you cannot play rotated pictures without an OS or a  software compatible with Exif. Exif is the fi  le format for still pictures, to which recording 
information and other data can be added, established by JEITA [Japan Electronics and 
Information Technology Industries Association].
•  You may not be able to rotate pictures shot on other equipment.
•  [ROTATE DISP.] cannot be used when displaying multiple screens or using a calendar  search.
z  [FAVORITE]
You can do the following if a mark [
z] has been added to pictures and they have been 
set as favorites.
•  Play back the pictures set as favorite. ([FAVORITE PLAY])
•  Play back the pictures set as favorites only as a slide show.
•  Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT  z])
•  Print only the pictures set as favorites.
1  Select [FAVORITE] on the [PLAYBACK] menu. (P18)
2 Press  r to select [ON] and then press [MENU/
SET].
•  You cannot set pictures as favorites if [FAVORITE] is set 
to [OFF]. Also the favorites icon [ z] will not appear when 
[FAVORITE] is set to [OFF] even if it was previously set to 
[ON].
VQT1X05_DMC-LS85_P-PC_EN.indb   70 VQT1X05_DMC-LS85_P-PC_EN.indb   70 2008/12/22   20:20:29
2008/12/22   20:20:29