Panasonic Digital Camera Dmc Ls5 Owners Manual For Advanced Features

							- 51 -VQT3W70
 
Using the [Playback] menu
Playback Mode: 
For details about the setting procedure in the [Playback] menu (→24)
[Resize]
Picture size can be reduced to facilitate e-mail attachment and use in w\
ebpages, etc.
(Still pictures recorded at the smallest recording pixel level cannot b\
e further reduced.)
Set-up: Press [MENU/SET] → [Playback] menu → Select [Resize]
 
■[SINGLE]
Select [SINGLE] 
Select still picture
Select size
Current size
Size after change
Select [Yes]
 • After confirmation, press [ / ] to return to the menu screen. 
						

							- 52 -VQT3W70
Using the [Playback] menu
 
■
[MULTI]
Select [MULTI] in step  on the previous page
Select size
Select still picture (up to 50 pictures)
Resize setting
 • To cancel → Press [MENU/SET] again.
Select [OK]
Select [Yes]
 
●Picture quality is reduced after resizing. 
●May not be compatible with still pictures taken on other devices. 
						

							- 53 -VQT3W70
Using the [Playback] menu
For details about the setting procedure in the [Playback] menu (→24)
 [Protect]
Set protection to disable picture deletion. Prevents deletion of importa\
nt pictures.
Set-up:  Press [MENU/SET] → [Playback] menu → Select [Protect]
Select [SINGLE] or [MULTI]
Select picture and make setting
 
●[SINGLE] 
●[MULTI]
 Picture protectedPicture protected
 • To cancel → Press 
[MENU/SET] again.
 • After confirmation,  press [
 / ] to 
return to the menu 
screen.
 
■To clear all
Select [CANCEL] in step 
 and select [Yes].
 
■To cancel while releasing all
Press [MENU/SET].
 
●May not be effective when using other devices. 
●Formatting will cause even protected files to be deleted. 
●If the write-protect switch is set to “LOCK,” pictures on the card\
 cannot be deleted even 
if they are not protected with the camera setting. 
						

							- 54 -VQT3W70
Using the [Playback] menu
For details about the setting procedure in the [Playback] menu (→24)
 [Copy]
You can copy pictures between built-in memory and memory card.
Set-up:  Press [MENU/SET] → [Playback] menu → Select [Copy]
Select the copy method (direction)
 :  Copy all pictures from built-in memory to card (go to step ). :  Copy 1 picture at a time from card to built-in memory.
When selecting , press   to select a picture, and then 
press [MENU/SET] 
Select [Yes]
 • To cancel → Press [MENU/SET].
 • After confirmation, press [ / ] to return to the menu screen.
 
●Copying pictures may take several minutes. Do not turn off power or perform other 
operations during copying.
 
●If identical names (folder/file numbers) are present in the copy desti\
nation, a new 
folder for copying will be created when copying from built-in memory to \
card (). 
Identically-named files will not be copied from card to built-in memory \
(). 
●The [Protect] setting will not be copied. Set it again after copying. 
●Only pictures from Panasonic digital cameras (LUMIX) may be copied. 
						

							- 55 -VQT3W70
 
Using with your PC
Pictures and motion pictures can be imported from the camera to your com\
puter by 
connecting the two together. • If your computer does not support SDXC Memory Cards, a message will be d\
isplayed requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.) If the card is not recognized, refer to the following suppor\
t website: 
http://panasonic.net/avc/sdcard/information/SDXC.html
Getting Ready:  • Make sure to insert batteries with sufficient power.
 • When importing pictures from the built-in memory, remove any memory cards. 
 
■To cancel connection
Click “Safely Remove Hardware”  in the Windows System Tray → disconnect USB 
connection cable  → turn off camera power
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
[Access] 
(sending data)
 • Do not disconnect the USB 
connection cable 
while [Access] is 
displayed.
USB connection 
cable
(always use cable 
supplied)Connect camera to 
computer
 • Please make sure you use the supplied USB connection cable.
Use of cables other than the 
supplied USB connection cable 
may cause malfunction.
Select [PC] on the camera
Operate with your computer 
						

							- 56 -VQT3W70
Using with your PC
DCIM (Still pictures/motion pictures)100_PANA  (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
  
:999_PANA
MISC
∗   New folders are created in the following cases:
 • When pictures are added to folders containing files numbered 999.
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.)
 
■When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if you select [PictBri\
dge(PTP)] in 
the step  on the previous page.
 • Only picture output can be performed from the camera. (Picture deletion\
 can also be  performed with Windows Vista and Windows 7.)
 • It may not be possible to import if there are 1000 or more pictures on t\
he card.
 
●   Windows
Drives are displayed 
in “My Computer” or 
“Computer” folder.
 
●  Mac
Drives are displayed 
on the desktop.
(Displayed as 
“LUMIX”, “NO_NAME”, 
or “Untitled.”)
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 
■ Folder and file names on computer
∗
JPG: 
Still pictures
MOV: 
Motion pictures
 
●Do not use any other USB connection cables except the one supplied. 
●Turn off power before inserting or removing memory cards. 
●If the batteries run out while transmitting, a warning beep sounds. Canc\
el transmission 
using your computer immediately. Use batteries with sufficient power.
 
●Some computers can read directly from the camera’s memory card. 
For details, see the manual for your computer.
 
●For more details, consult your computer operating manual. 
						

							- 57 -VQT3W70
Using with your PC
Using “PHOTOfunSTUDIO” to copy pictures to your computer
With the “PHOTOfunSTUDIO” software on the supplied CD-ROM, a computer can be 
used to manage the recorded pictures.
 
●Main “PHOTOfunSTUDIO” functions
 • Copying recorded still pictures or motion pictures to a computer
 • Backing up still pictures or motion pictures that have been copied to a \
computer to media such as a DVD
 • Editing still pictures on a computer
 • Stitching still pictures recorded in Scene Mode [Panorama Assist] into a panorama
 • Attaching recorded pictures to e-mail
 • Uploading recorded pictures to YouTube or Facebook
 
●After importing pictures to your computer, you can print or e-mail them. 
						

							- 58 -VQT3W70
 
Printing
You can connect directly to a PictBridge-compatible printer for printing.\
Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.
Getting Ready: • Make sure to insert batteries with sufficient power.
 • When printing pictures from the built-in memory, remove any memory cards. 
 • Adjust the print quality or other settings on your printer, as needed.
Connect camera to 
printer 
 • Make sure you use the supplied USB connection cable. Use of 
cables other than the supplied 
USB connection cable may cause 
malfunction.
Select [PictBridge(PTP)] 
on the camera
Press   to select a 
picture to print, and then 
press [MENU/SET]
Select [Print start]
(Print settings (→61))
 • Do not disconnect 
the USB connection 
cable when the 
cable disconnection 
icon 
 is displayed 
(displayed with some 
printers.).
USB connection cable
(always use cable supplied)
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty 
operation.)
 
■To cancel print
Press [MENU/SET]. 
						

							- 59 -VQT3W70
Printing
 
●Do not use any other USB connection cables except the one supplied. 
●Disconnect USB connection cable after printing. 
●Turn off power before inserting or removing memory cards. 
●When the batteries run out during communication, a warning beep sounds. \
Cancel 
printing and disconnect the USB connection cable. Use batteries with suf\
ficient power.
Printing multiple pictures
Select [Multi Print] in step  on the previous page
Select item
 • [Multi Select]:   Scroll between pictures with    , select pictures 
with [MENU/SET] to print. (Press [MENU/SET] again to 
release selection.)
                     
   Press  to select [OK], and press [MENU/SET].
 • [Select All]:    Print all pictures.
Print (Previous page )
 
●Select [Yes] if print confirmation screen is displayed. 
●An orange ● displayed during printing indicates an error message.  
●Print may be divided into several times if printing a large amount of pi\
ctures.
(Remaining sheets display may differ from set number.) 
						

							- 60 -VQT3W70
Printing
Print with date
 
●Printing in store: Only recording date can be printed. Request date prin\
ting in store.
 • When printing still pictures of 16:9 Aspect Ratio, check in advance that the store can accept this size.
 
●Using computer:   Print settings for recording date and text information can be made 
using the supplied CD-ROM “PHOTOfunSTUDIO.”
 
●Using printer:       Recording date can be printed by setting [Print with Date] ( →61) to [ON] 
when connecting to a printer compatible with date printing.