Panasonic Digital Camera Dmc Ls2 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc Ls2 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Menu Settings
71VQT0V10
If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
The protect setting may not be effective
on other equipment.
If you want to delete protected pictures, cancel their protection.
Even if you protect pictures in the built-in memory or a card, they will be deleted if
the built-in memory or the card is
formatted. (P74)
Even if you do not protect pictures on an SD Memory Card, they cannot be deleted
when the card’s write protect...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-70.png "Page 71
Menu Settings
71VQT0V10
If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
The protect setting may not be effective
on other equipment.
If you want to delete protected pictures, cancel their protection.
Even if you protect pictures in the built-in memory or a card, they will be deleted if
the built-in memory or the card is
formatted. (P74)
Even if you do not protect pictures on an SD Memory Card, they cannot be deleted
when the card’s write protect...")
Menu Settings 71VQT0V10 If you press [MENU/SET] while canceling protection, the canceling will stop halfway. The protect setting may not be effective on other equipment. If you want to delete protected pictures, cancel their protection. Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted. (P74) Even if you do not protect pictures on an SD Memory Card, they cannot be deleted when the card’s write protect...
Page 72
![Page 72
Menu Settings
72VQT0V10
If the original picture is protected, you
cannot overwrite it. Select [NO] and
newly create a resized picture.
4Press [MENU/SET] twice to close
the menu.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
You can enlarge and then clip the important
part of the recorded picture.
1Press 21 to select the picture
and then press 4.
Motion pictures cannot be trimmed.
It may not be possible to trim pictures
recorded with other equipment.
2Enlarge or...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-71.png "Page 72
Menu Settings
72VQT0V10
If the original picture is protected, you
cannot overwrite it. Select [NO] and
newly create a resized picture.
4Press [MENU/SET] twice to close
the menu.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
You can enlarge and then clip the important
part of the recorded picture.
1Press 21 to select the picture
and then press 4.
Motion pictures cannot be trimmed.
It may not be possible to trim pictures
recorded with other equipment.
2Enlarge or...")
Menu Settings 72VQT0V10 If the original picture is protected, you cannot overwrite it. Select [NO] and newly create a resized picture. 4Press [MENU/SET] twice to close the menu. Press [ ] to display the [PLAY] mode menu and select the item to set. (P65) You can enlarge and then clip the important part of the recorded picture. 1Press 21 to select the picture and then press 4. Motion pictures cannot be trimmed. It may not be possible to trim pictures recorded with other equipment. 2Enlarge or...
Page 73
![Page 73
Menu Settings
73VQT0V10
1Press 34 to select the copy
destination and then press
[MENU/SET].
:
All the picture data in the built-in
memory are copied onto the card at
one time.
(Perform step 3)
:
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2Press 21 to select the picture
and then press 4.
When you copy picture data from the
built-in memory to the card, all the
pictures are selected at one time so this
screen does not appear.
3Press 3 to select...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-72.png "Page 73
Menu Settings
73VQT0V10
1Press 34 to select the copy
destination and then press
[MENU/SET].
:
All the picture data in the built-in
memory are copied onto the card at
one time.
(Perform step 3)
:
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2Press 21 to select the picture
and then press 4.
When you copy picture data from the
built-in memory to the card, all the
pictures are selected at one time so this
screen does not appear.
3Press 3 to select...")
Menu Settings 73VQT0V10 1Press 34 to select the copy destination and then press [MENU/SET]. : All the picture data in the built-in memory are copied onto the card at one time. (Perform step 3) : One picture at a time is copied from the card to the built-in memory. (Perform step 2) 2Press 21 to select the picture and then press 4. When you copy picture data from the built-in memory to the card, all the pictures are selected at one time so this screen does not appear. 3Press 3 to select...
Page 74
![Page 74
Menu Settings
74VQT0V10
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-73.png "Page 74
Menu Settings
74VQT0V10
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the...")
Menu Settings 74VQT0V10 Press [ ] to display the [PLAY] mode menu and select the item to set. (P65) Usually, it is not necessary to format the built-in memory and the card. Format them when the message [BUILT-IN MEMORY ERROR] or [MEMORY CARD ERROR] appears. Press 3 to select [YES] and then press [MENU/SET]. (The illustration shows the screen when the built-in memory is formatted.) When a card is not inserted, you can format the built-in memory. When a card is inserted, you can format the...
Page 75
![Page 75
Connecting to other equipment
75VQT0V10
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software [LUMIX Simple Viewer]
(for Windows
®) in the CD-ROM (supplied)
allows you to easily acquire pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use Windows
98/98SE, install the
USB driver and then connect it to the
computer.
For information about installing [LUMIX
Simple Viewer] etc.,...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-74.png "Page 75
Connecting to other equipment
75VQT0V10
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software [LUMIX Simple Viewer]
(for Windows
®) in the CD-ROM (supplied)
allows you to easily acquire pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use Windows
98/98SE, install the
USB driver and then connect it to the
computer.
For information about installing [LUMIX
Simple Viewer] etc.,...")
Connecting to other equipment 75VQT0V10 Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] (for Windows ®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail. If you use Windows 98/98SE, install the USB driver and then connect it to the computer. For information about installing [LUMIX Simple Viewer] etc.,...
Page 76
![Page 76
Connecting to other equipment
76VQT0V10
If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by Windows Plug and
Play. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-75.png "Page 76
Connecting to other equipment
76VQT0V10
If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by Windows Plug and
Play. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card...")
Connecting to other equipment 76VQT0V10 If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by Windows Plug and Play. The drive then appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen. The drive is displayed as [LUMIX] when you connect the camera with no card inserted. The drive is displayed as [NO_NAME] or [Untitled] when you connect the camera with a card...
Page 77
![Page 77
Connecting to other equipment
77VQT0V10
Do not use any other USB connection
cables except the supplied one.
Do not disconnect the USB connection
cable while [ACCESS] is displayed.
If battery power is exhausted while the
camera and the PC are communicating,
the recorded data may be damaged. Use
batteries with sufficient battery power
(P13) or the AC adaptor (DMW-AC6;
optional) when you connect the camera to
the PC.
If the remaining battery power becomes
low while the camera and the PC are...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-76.png "Page 77
Connecting to other equipment
77VQT0V10
Do not use any other USB connection
cables except the supplied one.
Do not disconnect the USB connection
cable while [ACCESS] is displayed.
If battery power is exhausted while the
camera and the PC are communicating,
the recorded data may be damaged. Use
batteries with sufficient battery power
(P13) or the AC adaptor (DMW-AC6;
optional) when you connect the camera to
the PC.
If the remaining battery power becomes
low while the camera and the PC are...")
Connecting to other equipment 77VQT0V10 Do not use any other USB connection cables except the supplied one. Do not disconnect the USB connection cable while [ACCESS] is displayed. If battery power is exhausted while the camera and the PC are communicating, the recorded data may be damaged. Use batteries with sufficient battery power (P13) or the AC adaptor (DMW-AC6; optional) when you connect the camera to the PC. If the remaining battery power becomes low while the camera and the PC are...
Page 78
![Page 78
Connecting to other equipment
78VQT0V10
Connect the USB connection cable with
the [ ] mark facing the [1] mark on
the [DIGITAL] socket.
Hold the USB connection cable at C
and insert straight in or take straight
out.
3Press 4 to select [PictBridge
(PTP)] and then press
[MENU/SET].
If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P22)
Do not use any other USB connection
cables except the supplied...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-77.png "Page 78
Connecting to other equipment
78VQT0V10
Connect the USB connection cable with
the [ ] mark facing the [1] mark on
the [DIGITAL] socket.
Hold the USB connection cable at C
and insert straight in or take straight
out.
3Press 4 to select [PictBridge
(PTP)] and then press
[MENU/SET].
If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P22)
Do not use any other USB connection
cables except the supplied...")
Connecting to other equipment 78VQT0V10 Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket. Hold the USB connection cable at C and insert straight in or take straight out. 3Press 4 to select [PictBridge (PTP)] and then press [MENU/SET]. If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a PC. (P22) Do not use any other USB connection cables except the supplied...
Page 79
![Page 79
Connecting to other equipment
79VQT0V10
Items not supported by the printer are
displayed in gray and cannot be selected.
When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [ ] and then set the
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
[PRINT WITH DATE]
If the printer does not support date
printing, the date cannot be printed on the
picture....](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-78.png "Page 79
Connecting to other equipment
79VQT0V10
Items not supported by the printer are
displayed in gray and cannot be selected.
When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [ ] and then set the
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
[PRINT WITH DATE]
If the printer does not support date
printing, the date cannot be printed on the
picture....")
Connecting to other equipment 79VQT0V10 Items not supported by the printer are displayed in gray and cannot be selected. When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ ] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.) [PRINT WITH DATE] If the printer does not support date printing, the date cannot be printed on the picture....
Page 80
![Page 80
Connecting to other equipment
80VQT0V10
∫Setting the date printing with the
DPOF print in advance
We recommend setting DPOF date printing
with [DPOF PRINT] (P70) in advance when
the printer supports it. If you select
[DPOF PICTURE], printing starts and the
recording date is printed.
∫Layout printing
When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set
[PAGE LAYOUT] to [ ] and then set
[NUM. OF PRINTS] to 4.
...](http://img.usermanuals.tech/thumb/58/64823/w300_dmc-ls2_om_d-79.png "Page 80
Connecting to other equipment
80VQT0V10
∫Setting the date printing with the
DPOF print in advance
We recommend setting DPOF date printing
with [DPOF PRINT] (P70) in advance when
the printer supports it. If you select
[DPOF PICTURE], printing starts and the
recording date is printed.
∫Layout printing
When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set
[PAGE LAYOUT] to [ ] and then set
[NUM. OF PRINTS] to 4.
...")
Connecting to other equipment 80VQT0V10 ∫Setting the date printing with the DPOF print in advance We recommend setting DPOF date printing with [DPOF PRINT] (P70) in advance when the printer supports it. If you select [DPOF PICTURE], printing starts and the recording date is printed. ∫Layout printing When printing a picture several times on 1 sheet of paper For example, if you want to print a picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [ ] and then set [NUM. OF PRINTS] to 4. ...