Panasonic Digital Camera Dmc Ls1 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc Ls1 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
Recording pictures (basic) 41VQT0Q58 ∫Available flash settings by recording mode The available flash settings depend on the recording mode. (±: Available, —: Not available) ¢Not available in backlight compensation ∫The available flash range to take pictures The available flash range is an approximation. Refer to P33 for the focus range. Refer to P65 for the ISO sensitivity. If the ISO sensitivity is set to [AUTO], it is automatically adjusted from [ISO100] to [ISO400] when you use the flash. ...
Page 42
Recording pictures (basic) 42VQT0Q58 ∫Shutter speed for each flash setting ¢The shutter speed changes depending on the slow shutter setting. (P67) Do not stare at the photo flash from close proximity. If you bring the flash too close to the subjects, they may be distorted or discolored by its heat and lighting. Do not cover the photo flash with your fingers or any other items. While the flash is charged, the LCD monitor turns off and you cannot take pictures. The status indicator lights....
Page 43
Recording pictures (basic) 43VQT0Q58 Taking Pictures with the Self-timer 1Select the self-timer mode. : Self-timer set to 10 seconds ; : Self-timer set to 2 seconds ; No display: canceled 2Take the picture. A: Press the shutter button halfway to foc us. B: Press the shutter button fully to take the picture. The self-timer indicator A blinks and the shutter is activated after 10 seconds (or 2 seconds). If you press the [MENU] button when the self-timer is set, the self-timer setting is...
Page 44
Recording pictures (basic) 44VQT0Q58 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background. Under exposed Compensate the exposure toward positive. Properly exposed Over exposed Compensate the exposure toward negative. 1Press 3 several times until [ EXPOSURE] appears and then compensate the exposure. You can compensate from j2EV to i2 EV in steps of 1/3 EV. EV is an abbreviation of...
Page 45
Recording pictures (basic) 45VQT0Q58 Taking Pictures using Auto Bracket In this mode, 3 pictures are automatically recorded by each press of the shutter button according to the compensation range of the exposure. You can select the desired exposure among the 3 types of pictures. 1Press 3 several times until [ AUTO BRACKET] appears and then set the compensation range of the exposure. You can select the exposure from j1EV to i1 EV in steps of 1/3 EV. When you do not use auto bracket, select...
Page 46
Recording pictures (basic) 46VQT0Q58 Optical Image Stabilizer This mode recognizes and compensates jitter. You can reduce blurring caused by jitter especially when you take pictures with the optical zoom set to Tele or when you take pictures indoors where the shutter speed is slowed down. A:Optical image stabilizer button 1Press the optical image stabilizer button A until [STABILIZER] appears and then select the stabilizer function mode. ∫Demonstration of the optical image stabilizer...
Page 47
Recording pictures (basic) 47VQT0Q58 Taking Pictures using Burst Mode 1Select the burst mode. : High speed ; : Low speed ; : Unlimited ¢ ; No display: canceled ¢Depending on the memory size, battery power, picture size and quality (compression) ∫Number of pictures recorded in burst mode ¢When the shutter speed is higher than 1/60 and the flash is not activated When the burst mode setting is set to Unlimited – You can take pictures until the capacity of the built-in memory or the card becomes...
Page 48
Recording pictures (basic) 48VQT0Q58 Hold down the shutter button fully to activate the burst mode. When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3. If the flash is activated, you can record only 1 picture. When setting auto bracket and the burst mode simultaneously, auto bracket will be performed. The ways to control the exposure and the white balance vary depending on the burst mode setting. When the burst mode is set to [ ] or [ ], they are...
Page 49
Playback (basic) 49VQT0Q58 Playback (basic) Playing Back Pictures When a card is not inserted, the picture data in the built-in memory appear. When a card is inserted, the picture data in the card appear. (P20) 1Select the picture. 2 : Play back the previous picture. 1 : Play back the next picture. The last recorded picture will be played back first. When [ROTATE DISP.] (P71) is set to [ON], pictures recorded by holding the camera vertically are played back vertically. ∫ Fast...
Page 50
Playback (basic) 50VQT0Q58 9 Pictures Multi Playback 1Switch to multi screen. (The illustration shows the screen when the card is used.) 2Select the pictures. ∫ To return to the normal playback Rotate the zoom lever towards [ ] or press the [MENU] button. The picture with the number colored in orange appears. ∫ To delete a picture during a 9 pictures multi playback Press the [ ] button. When the confirmation screen appears, press 4 to select [YES], and press 1. (P52) Pictures will not be...