Panasonic Digital Camera Dmc Lf1 Owners Manual For Advanced Features

Wi-Fi/NFC
Displaying still pictures on a TVVQT5A33
- 191 -
 ●When a TV is connected to this unit, the TV screen may temporarily return to the 
status before the connection. Pictures are displayed again when you take or play back 
pictures.
 ●[Effect] and [Sound] of the Slide Show are disabled. ●Motion pictures cannot be played back. ●During the multi/calendar playback, pictures displayed on the screen of this unit are 
not displayed on TV.    

Wi-Fi/NFC
Sending still pictures to a printer
VQT5A33- 192 -
You can send still pictures to a compatible printer and print them wirelessly.
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending selected pictures
[Send Images Stored in the Camera] Yes No No No No
 • Some images may not be played back or sent depending on the device. • For more details about picture sending methods. 
(→237)
Preparation:
 • Y

ou can print out recorded still pictures wirelessly from a PictBridge...

Wi-Fi/NFC
Sending still pictures to a printerVQT5A33
- 193 -
Select the still picture and print
 • Pictures are selected the same way as when connecting by USB connection cable (supplied). For more details  (→255).
 • T

o change the setting or disconnect, press [Wi-Fi] button.  (→171)
 ●When sending still pictures on a mobile network, high packet communication fees 
may be incurred depending on the details of your contract.
 ●Motion pictures cannot be printed out.    

Wi-Fi/NFC
Sending pictures to AV equipment
VQT5A33- 194 -
Still pictures and motion pictures can be sent to AV equipment in the home (home AV 
equipment), such as DLNA compatible recorders. Through LUMIX CLUB, you can also 
send your still pictures and motion pictures to AV equipment of family and friends far 
away (outside AV equipment).
You can make a setting so that pictures in the camera can be sent to AV equipment 
automatically while the camera battery is charging. ([Smart Transfer] (→222))...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5A33
- 195 -
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
 • Read the operating instructions of your device for details.
When sending images to [External], the following are required:
 • Registration to “LUMIX CLUB”.  (→214) • Address number and access number acquired by the destination External A

V device. 
(→220)
See the part of the manual that applies to your objective. 
Sending a picture each time one is recorded...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5A33
- 196 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Home] or [External]
Select [Via Network] or [Direct] to connect (→229)
 • [Direct] cannot be selected when...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5A33
- 197 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Home] or [External]
Select [Via Network] or [Direct] to connect (→229)
 • [Direct] cannot be selected when [External] has...

Wi-Fi/NFC
Sending pictures to AV equipmentVQT5A33
- 198 -
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→171)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    

Wi-Fi/NFC
Sending pictures to a PC
VQT5A33- 199 -
Still pictures and motion pictures recorded by the camera can be sent to a PC.
You can make a setting so that pictures in the camera can be sent to a PC automatically 
while the camera battery is charging. ([Smart Transfer] (→222))
 ■Sending method, and pictures that can be sent
JPEG RAW MP4AVCHD*3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes Yes No No Yes
Sending selected pictures
[Send Images Stored in the Camera] Yes...

Wi-Fi/NFC
Sending pictures to a PCVQT5A33
- 200 -
 ■To create a folder that receives images
 • Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters.  An attempt to create a receive 
folder may fail if the account includes non-alphanumeric characters.
 ■When using “PHOTOfunSTUDIO”
Install “PHOTOfunSTUDIO” to the PC
 • For details on hardware requirements and installation, read “Installing supplied  software” (→251).
Create...