Panasonic Digital Camera Dmc Lc20 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc Lc20 Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Setting up the Power Save Mode
When setting this mode, the camera is
automatically turned off if it is not operated
for the specified time.
1Press the [MENU] button.
2Press 3/4 to select [POWER
SAVE]
.
3Press 2/1 to select [2MIN.] /
[5MIN.] / [10MIN.] / [OFF]
.
4Press the [MENU] button.
The menu will disappear.
If you want to cancel the power save mode, set the power switch to [OFF]
and then set it to [ON] again.
When using the AC adaptor (optional, DMW-AC1), the power save mode is
not...](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-60.png "Page 61
61
Setting up the Power Save Mode
When setting this mode, the camera is
automatically turned off if it is not operated
for the specified time.
1Press the [MENU] button.
2Press 3/4 to select [POWER
SAVE]
.
3Press 2/1 to select [2MIN.] /
[5MIN.] / [10MIN.] / [OFF]
.
4Press the [MENU] button.
The menu will disappear.
If you want to cancel the power save mode, set the power switch to [OFF]
and then set it to [ON] again.
When using the AC adaptor (optional, DMW-AC1), the power save mode is
not...")
61 Setting up the Power Save Mode When setting this mode, the camera is automatically turned off if it is not operated for the specified time. 1Press the [MENU] button. 2Press 3/4 to select [POWER SAVE] . 3Press 2/1 to select [2MIN.] / [5MIN.] / [10MIN.] / [OFF] . 4Press the [MENU] button. The menu will disappear. If you want to cancel the power save mode, set the power switch to [OFF] and then set it to [ON] again. When using the AC adaptor (optional, DMW-AC1), the power save mode is not...
Page 62
![Page 62
62
Memorizing the settings
If [MEMORY] is set to [ON], the status of
the following settings can be memorized
after the camera has been switched off.
ISO sensitivity
White balance
Monitor brightness
Beep sound
Auto review
Power save
Digital zoom
Exposure compensation
Flash mode
[Preparation]
Set the power switch to [ON].
1Press the [MENU] button.
2Press 3/4 to select [MEMORY].
3Press 2/1 to select [ON].
4Press the [MENU] button.
The menu will disappear
Even if you set [MEMORY] to [OFF],...](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-61.png "Page 62
62
Memorizing the settings
If [MEMORY] is set to [ON], the status of
the following settings can be memorized
after the camera has been switched off.
ISO sensitivity
White balance
Monitor brightness
Beep sound
Auto review
Power save
Digital zoom
Exposure compensation
Flash mode
[Preparation]
Set the power switch to [ON].
1Press the [MENU] button.
2Press 3/4 to select [MEMORY].
3Press 2/1 to select [ON].
4Press the [MENU] button.
The menu will disappear
Even if you set [MEMORY] to [OFF],...")
62 Memorizing the settings If [MEMORY] is set to [ON], the status of the following settings can be memorized after the camera has been switched off. ISO sensitivity White balance Monitor brightness Beep sound Auto review Power save Digital zoom Exposure compensation Flash mode [Preparation] Set the power switch to [ON]. 1Press the [MENU] button. 2Press 3/4 to select [MEMORY]. 3Press 2/1 to select [ON]. 4Press the [MENU] button. The menu will disappear Even if you set [MEMORY] to [OFF],...
Page 63
![Page 63
63
Resetting the File Number
Since the file numbers are recorded
sequentially by the camera, when you use
some cards, it is possible that the file
numbers on your cards are not in order.
Use this function when you insert a new
card and you want to start recording from
the file number 0001.
1Press the [MENU] button.
2Press 3/4 to select [NO. RESET].
3Press 2/1 to select [ON].
4Press the [MENU] button.
The menu will disappear.
1,42,3
2,3
NO. RESET
LANGUAGE ENG
MEMORY](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-62.png "Page 63
63
Resetting the File Number
Since the file numbers are recorded
sequentially by the camera, when you use
some cards, it is possible that the file
numbers on your cards are not in order.
Use this function when you insert a new
card and you want to start recording from
the file number 0001.
1Press the [MENU] button.
2Press 3/4 to select [NO. RESET].
3Press 2/1 to select [ON].
4Press the [MENU] button.
The menu will disappear.
1,42,3
2,3
NO. RESET
LANGUAGE ENG
MEMORY")
63 Resetting the File Number Since the file numbers are recorded sequentially by the camera, when you use some cards, it is possible that the file numbers on your cards are not in order. Use this function when you insert a new card and you want to start recording from the file number 0001. 1Press the [MENU] button. 2Press 3/4 to select [NO. RESET]. 3Press 2/1 to select [ON]. 4Press the [MENU] button. The menu will disappear. 1,42,3 2,3 NO. RESET LANGUAGE ENG MEMORY
Page 64
![Page 64
64
Playing Back Images on a TV Monitor
Connecting the camera with a television
via supplied video cable
1, it is possible to
play back and view the recorded images.
[Preparation]
Turn the camera and the television off.
1Connect the video cable to the
V.OUT socket of the camera.
2Connect the video cable to the video
in socket of the TV
.
3Turn the television on and then
select the appropriate external
input
.
4Turn the camera on.
The image is displayed on the
television.
Viewing images in other...](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-63.png "Page 64
64
Playing Back Images on a TV Monitor
Connecting the camera with a television
via supplied video cable
1, it is possible to
play back and view the recorded images.
[Preparation]
Turn the camera and the television off.
1Connect the video cable to the
V.OUT socket of the camera.
2Connect the video cable to the video
in socket of the TV
.
3Turn the television on and then
select the appropriate external
input
.
4Turn the camera on.
The image is displayed on the
television.
Viewing images in other...")
64 Playing Back Images on a TV Monitor Connecting the camera with a television via supplied video cable 1, it is possible to play back and view the recorded images. [Preparation] Turn the camera and the television off. 1Connect the video cable to the V.OUT socket of the camera. 2Connect the video cable to the video in socket of the TV . 3Turn the television on and then select the appropriate external input . 4Turn the camera on. The image is displayed on the television. Viewing images in other...
Page 65
![Page 65
65
After Use
After using the camera, it is recommended
that you complete the following steps:
1Turn the power switch to [OFF]. (P17)
2Open the memory card door.
3Slide the battery door and open it.
4Eject the card. (P15)
5Remove batteries. (P12)
The date back-up disappears after
about 6 hours.
5
4
2
3](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-64.png "Page 65
65
After Use
After using the camera, it is recommended
that you complete the following steps:
1Turn the power switch to [OFF]. (P17)
2Open the memory card door.
3Slide the battery door and open it.
4Eject the card. (P15)
5Remove batteries. (P12)
The date back-up disappears after
about 6 hours.
5
4
2
3")
65 After Use After using the camera, it is recommended that you complete the following steps: 1Turn the power switch to [OFF]. (P17) 2Open the memory card door. 3Slide the battery door and open it. 4Eject the card. (P15) 5Remove batteries. (P12) The date back-up disappears after about 6 hours. 5 4 2 3
Page 66
![Page 66
66
Connecting to PC
[Preparation]
Only if using Windows 98 or 98SE, start
the supplied CD from PC and install the
USB driver.
1Connect the camera to PC via the
supplied USB cable.
2After inserting the memory card into
the camera, turn the power switch
to [ON] and set the mode dial to
playback [ ].
[Windows]
The drive is shown on the [My
computer] folder.
If it is the first time connecting the
camera to PC, the required driver is
installed automatically in order to let
the camera be recognized...](http://img.usermanuals.tech/thumb/58/64809/w300_dmc-lc20_en_om_d-65.png "Page 66
66
Connecting to PC
[Preparation]
Only if using Windows 98 or 98SE, start
the supplied CD from PC and install the
USB driver.
1Connect the camera to PC via the
supplied USB cable.
2After inserting the memory card into
the camera, turn the power switch
to [ON] and set the mode dial to
playback [ ].
[Windows]
The drive is shown on the [My
computer] folder.
If it is the first time connecting the
camera to PC, the required driver is
installed automatically in order to let
the camera be recognized...")
66 Connecting to PC [Preparation] Only if using Windows 98 or 98SE, start the supplied CD from PC and install the USB driver. 1Connect the camera to PC via the supplied USB cable. 2After inserting the memory card into the camera, turn the power switch to [ON] and set the mode dial to playback [ ]. [Windows] The drive is shown on the [My computer] folder. If it is the first time connecting the camera to PC, the required driver is installed automatically in order to let the camera be recognized...
Page 67
67 The Menu Items REC mode menu 1W.BALANCE (P39) 2PICT. SIZE (P35)3QUALITY (P36)4SENSITIVITY (P41)5D. ZOOM (P31)6MONITOR (P58)7AUTO REVIEW (P59)8BEEP (P60)9POWER SAVE (P61)10CLOCK SET (P25)11NO. RESET (P63)12LANGUAGE13MEMORY (P62) Playback mode menu For items without number, refer to that with the same name of REC mode menu. 14DELETE (P50)15PROTECT (P55)16DPOF (P52)17SLIDE SHOW (P56)18MONITOR19BEEP20POWER SAVE 21CLOCK SET22LANGUAGE23VIDEO (P64)24MEMORY
Page 68
68 Cautions for Use ª Cautions for Use Keep the digital camera away from magnetized equipment (such as a microwave oven, TV, video game equipment, etc.). If you use the digital camera on or near a TV, images may be disturbed due to electromagnetic wave radiation. Do not use near a cell phone because doing so may cause noise to adversely affect the images. Recorded data may be damaged, or images may be distorted by strong magnetic fields created by speakers or large motors. Electromagnetic...
Page 69
69 For storing or transporting the digital camera, place it in a bag or case lined with soft pads so as to prevent the coating on the camera body from being worn. After use, be sure to take the card out, and remove batteries. If the batteries are left in the digital camera for a long time, the voltage drops excessively, and the batteries will not function even after they are recharged. ª Optimal Use of Batteries Do not throw batteries into fire because it may cause an explosion. Always keep...
Page 70
70 ª LCD Monitor/Viewfinder LCD monitor In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. If the digital camera is extremely cold when you turn the power on, the image on the LCD monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness. Extremely high precision technology is employed to produce the LCD monitor screen featuring a total of...