Panasonic Digital Camera Dmc Gx7 Basic Owners Manual

							61
Playback/Editing
 (ENG) VQT5A95
Switching the Playback Method
Rotate the rear dial left.
1 screen 12 screens 30 screens Calendar screen 
display
•
It is possible to switch the playback screen by touching the 
following icons.
–[ ]: 1 screen
–[ ]: 12 screens
–[ ]: 30 screens
–[ ]: Calendar screen display
•The screen can be switched gradually by dragging the screen up or down.
1Rotate the rear dial left to display the Calendar screen.
2Press 3/4 /2 /1 to select the date to be played back.
•If there were no pictures recorded during a month, that 
month is not displayed.
3Press [MENU/SET] to display the images that are 
recorded in selected date.
4Press  3/4/2 /1  to select a picture and then press [MENU/SET].
Displaying multiple screens (Multi Playback)
Displaying Pictures by Recording Date (Calendar Playback)
1/98
CAL
46/ .0/ 56& 8&% 5)6 3* 45
 
 
   





 



 


 

6HW
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  61 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							62
Playback/Editing
VQT5A95 (ENG) 
Using Playback Functions
With this menu, you can use various playback functions such as cropping and other 
editing of recorded images, protect settings, etc.
You can create a single still picture from a recorded motion picture.
1Press 3 to pause motion picture playback.
2Press [MENU/SET].
•The same operation can be performed by touching [ ].
•Confirmation screen is displayed. It is executed when 
[Yes] is selected.
You can erase unnecessary parts recorded on the pictures taken.
•The erasure operation can only be performed by touching. [Clear Retouch]  automatically 
enables the touch operation.
1Select the menu.
2Press 2/1 to select a picture, and then press [MENU/SET].3Drag your finger over the part you want to delete.
•The parts to be erased are colored.•Touching [Undo] will return the colored part back to its 
previous state.
4Touch [Set].
•Preview screen is displayed.
5Touch [Save]  or press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Creating Still Pictures from a Motion Picture
Removing unnecessary parts [Clear Retouch]
[MENU]>[Playback] >[Clear Retouch]
6HW
5(029(
6&$/,1*
8QGR
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  62 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							63
Wi-Fi/NFC
 (ENG) VQT5A95
What you can do with the Wi-FiR function
•Please refer to “Owner’s Manual for advanced features (PDF format)” for details.
What you can do
Controlling with a Smartphone/Tablet
Recording with a smartphone.
Saving images stored in the camera.
Sending images to an SNS.Easy connection, easy transfer
You can use easily by pressing and holding 
[Wi-Fi] or by using the NFC function.
Displaying pictures on a TV
When sending images to Printer
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house 
(home AV devices). You can also send them to the devices (external AV 
devices) of your family or friends living away from you via “LUMIX CLUB”.
When sending images to PC
Using Web services
You can send pictures and motion pictures to an SNS, etc. via “LUMIX 
CLUB”. By setting up automatic transfers of pictures and motion pictures to 
the [Cloud Sync. Service], you can rece ive the transferred pictures or motion 
pictures on a PC or smartphone.
0ç10Ô
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  63 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							64
Wi-Fi/NFC
VQT5A95 (ENG) 
Controlling with a Smartphone/Tablet
You can remotely operate the camera using a 
smartphone/tablet.
You need to install “Panasonic Image App” (referred to 
as “ Image App ” from this point on )  on your 
smartphone/tablet.
The “Image App” is an application provided by Panasonic.
•
Use the latest version.
•The service may not be able to be used properly depending on the type of smartphone/tablet 
being used. For information on the Image App, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)
•When downloading the app on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.
¢ Connecting to this unit with [Wi-Fi Direct] re quires  Android OS 4.0 or higher and Wi-Fi 
Direct
TM support.
Installing the smartphone/tablet app “ Panasonic Image App ”
For AndroidTM appsFor iOS apps
OS Android 2.2 ~ Android 4.2¢iOS 5.0~ iOS 6.1
Installation 
procedure
1Connect your Android device 
to a network.
2Select “Google PlayTM Store”.
3Enter “ Panasonic Image App ” 
into the search box.
4Select “ Panasonic Image 
App ” and install it.
•
The icon will be added to the 
menu.
1Connect the iOS device to the 
network.
2Select “App StoreSM”.
3Enter “ Panasonic Image App ” 
into the search box.
4Select “ Panasonic Image 
App ” and install it.
•
The icon will be added to the 
menu.
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  64 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							65
Wi-Fi/NFC
 (ENG) VQT5A95
A connection can be easily established by pressing and holding [Wi-Fi] or by using the 
NFC function.
1Press and hold [Wi-Fi].
•The information (SSID and password) required for directly 
connecting your smartphone/tablet to this unit is displayed.
•Except for when connecting for the first time, the screen 
from the previous connection is displayed.
•The same screen can be displayed by selecting the 
following menu items.
•To change the connection method, press [DISP.], and then 
select the connection method.
2Operate the smartphone/tablet.
Connecting to a smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance. (P64)
[Wi-Fi] >[New Connection] >[Remote Shooting 
& View]
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit, and 
then enter the password.
3 Start “ Image App ”. (P64)
•
When the connection is complete, live images being captured by the camera are 
displayed on the smartphone/tablet.
0ç10Ô
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  65 ページ  ２０１３年７月１１日　木曜日　午後７時１７分 
						

							66
Wi-Fi/NFC
VQT5A95 (ENG) 
Using the NFC “ Near Field Communication ” function, you can easily transfer data 
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
1Launch “ Image App ” on your smartphone/tablet.
2While  [ ]  is displayed on the connection 
screen of the “ Image App ”, touch the 
smartphone/tablet to  [ ] of this unit.
•
It may take time to complete the connection.•When the smartphone/tablet has connected, an 
image of this 
camera will be displayed on the 
smartphone/tablet.
•If a connection attempt by touching fails, restart the 
“ Image App ”, and then display the screen in step 
1 
again.
•If a connection is established during single picture 
playback, the picture will be transferred to the 
smartphone/tablet. (P68)
Connecting to a smartphone/tablet by using the NFC function
∫ Compatible models
This function can be used with the NFC comp atible device with Android (OS version 
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer 
to the owner’s manual of your device. 
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
(On your smartphone/tablet)
•Check that your smartphone/tablet is a 
compatible model.
•Turn on the Wi-Fi function.•Install the “ Image App ” in advance. (P64)
When connecting for the first time, the connection confirmation screen is  displayed
1When the connection confirmation screen is displayed on this unit, select 
[Yes].
2Touch the smartphone/tablet to [ ] of the camera again.
•The connected smartphone/tablet is registered to this camera.
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  66 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							67
Wi-Fi/NFC
 (ENG) VQT5A95
1Connect to a smartphone/tablet. (P65)2Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.
•Motion pictures can also be recorded.•Some settings are not available.•The screen differs depending on the operating system.
1Connect to a smartphone/tablet. (P65)
2Select [ ] on the smartphone/tablet.
3Drag an image.
•The function can be assigned to the top, bottom, left or 
right according to your preference.
•If an image is touched, the picture will be played back in an 
enlarged size.
Taking pictures via a smartphone/tablet (remote recording)
Saving images stored in the camera/Sending images in the camera to 
an SNS
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  67 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							68
Wi-Fi/NFC
VQT5A95 (ENG) 
A Wi-Fi connection using NFC function is possible by touching the smartphone/tablet to 
this unit, and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the 
smartphone/tablet
¢ of your family or friend.¢Installing the “ Image App ” is required for use.
1Play back the picture you want to tran sfer to the smartphone/tablet in the 
camera.
2Launch “ Image App ” on the smartphone/tablet at the transfer destination.
3While  [ ]  is displayed on the connection 
screen of the “ Image App ”, touch the 
smartphone/tablet to  [ ] of this unit.
•
It may take time to complete the connection.
•If a connection attempt by touching fails, restart the 
“ Image App ”, and then display the screen in step 2 
again.
•They cannot be transferred as a batch.
•Depending on the environment you are using, it may take a few minutes to complete the image 
transfer. 
Transferring images stored in the camera easily
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].•Set [Touch Sharing] to [ON].
(On your smartphone/tablet)
•Check that your smartphone/tablet is a 
compatible model.
•Turn on the Wi-Fi function.•Install the “ Image App ” in advance. (P64)
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  68 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							69
Wi-Fi/NFC
 (ENG) VQT5A95
To change the connection method, press [DISP.], and then 
select the connection method.
Changing the connection method
Connection methodDescription of settings
[Via Network]Connects via a wireless access point. P70
[Direct]Your device connects directly to this unit. P72
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  69 ページ  ２０１３年７月１１日　木曜日　午後２時４０分 
						

							70
Wi-Fi/NFC
VQT5A95 (ENG) 
You can select the method for connecting to a wireless 
access point.
¢WPS refers to a function that allows you to easily configure 
the settings related to the connection and security of wireless 
LAN devices. To check if the wireless access point you are 
using is compatible with WPS, refer to the manual of the 
wireless access point.
Via the network
Connection methodDescription of settings
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup
TM with a WPS mark.
Press the wireless access point 
WPS button until it switches to WPS 
mode.
•
Refer to the wireless access point 
instruction manual for details.
e.g.:
[WPS (PIN code)]
Save PIN code type wireless access
 point that is compatible with 
Wi-Fi Protected Setup with a WPS mark.
1Select the wireless access point you are connecting 
to.
2Enter the PIN code displayed on the camera screen 
into the wireless access point.
3Press [MENU/SET].
•Refer to the wireless access point instruction manual for 
details.
[Manual Connection]
Select this option when you are not sure about the WPS 
compatibility, or when you want to search for and connect to a 
wireless access point.
•
Refer to P71 for details.
DMC-GX7C&GX7K&GX7PPC-VQT5A95_eng.book  70 ページ  ２０１３年７月１６日　火曜日　午後５時５９分