Panasonic Digital Camera Dmc Gm5k Owners Manual

							21
Recording
 (ENG) SQT0419
Taking Pictures using the Automatic Function 
(Intelligent Auto Mode)
Recording Mode: 
In this mode, the camera makes the optimal settings for the subject and scene, so we 
recommend it when you wish to leave the settings to the camera and record without 
thinking about them.
1Set the mode dial to  [ ¦].
•The camera will switch to either the most recently 
used of Intelligent Auto Mode or Intelligent Auto Plus 
Mode.
At the time of purchase, the mode is set to Intelligent 
Auto Plus Mode.
2Align the screen with the subject.
•When the camera identifies the optimum scene, the 
icon of the scene concerned is displayed in blue for 2 
seconds, after which its color changes to the usual red. 
(Automatic scene detection)
∫Switching between Intelligent Auto Plus Mode and Intelligent Au to Mode
1Press [MENU/SET].2Press 2.3Press 3/4 to select the [ ] or [ ] tab.
4Press  2/1 to select [ ] or [ ] and then 
press  [MENU/SET].
•
If [DISP.]  is pressed, the description of the selected 
mode will be displayed.
When [iHandheld Night Shot] is set to [ON] and [ ] is detected whi le taking handheld 
night shots, pictures of the night scenery will be taken at a h igh burst speed and composed 
into a single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise, 
without using a tripod.
Recording night scenes ([iHandheld Night Shot])
>  [Rec] > [iHandheld Night Shot]  > [ON]/[OFF]
60
iL4:3
MENU
DMC-GM5K-SQT0419_eng.book  21 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							Recording
22SQT0419 (ENG) 
When [iHDR] is set to [ON] and there is, for example, strong contrast between the 
background and the subject, multiple still pictures are recorded with differing exposures 
and combined to create a single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [ ]  is displ ayed on the screen.
Recording Mode: 
You can easily set the blurrine ss of the background while checking the screen.
1Press the rear dial to display the setting screen.
•Each time the rear dial is press ed in Intelligent Auto Plus Mode, the camera switches 
between brightness setting operation, Defocus Control operation , and normal operation.
•Each time the rear dial is pressed in Intelligent Auto Mode, the camera switches between 
Defocus Control operation and normal operation.
2Set the blurriness by rotating the rear dial.
Recording Mode: 
This mode enables you to change the brightness and color tone t o your preferred settings 
from the ones set by the camera.
∫ Setting brightness
1Press the rear dial to display the setting screen.
•Each press of the rear dial switches among brightness 
setting, Defocus Control and end operation.
2Rotate the rear dial to adjust brightness.
∫ Setting color
1Press  1 to display the setting screen.2Rotate the rear dial to adjust color.
•This will adjust the color of the image from a reddish 
color to a bluish color.
•Press [MENU/SET] to return to the recording screen.
Combining pictures into a single picture with rich gradation ([ iHDR])
>  [Rec] > [iHDR]  > [ON]/[OFF]
Taking a picture with a blurred background (Defocus Control)
Recording images by changing the brightness or color tone
MENU
SS SS
SS
F
F250
500
4.0 5.6 8.0 3060
125
+1 +1 +2+2 +3+3 +4+4 +5+5-5-5-4-4-3-3-2-2-1-10 0000+5+5+5
AABBB
DMC-GM5K-SQT0419_eng.book  22 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							23
Recording
 (ENG) SQT0419
Taking panorama pictures (Panorama Shot Mode)
Recording Mode: 
Consecutive photos taken while the camera is moved are combined to form a panorama.
1Set the mode dial to  [ ].
•After the screen that asks you to check the recording direction  is displayed, the 
horizontal/vertical gui delines will be displayed.
2Press the shutter button halfway to focus.
3Press the shutter button fully and move the camera in a small c ircle 
in the direction of the arrow on the screen.
4Press the shutter button once again to end the picture recordin g.
•Recording can also be ended by keeping the camera still while recording.•Recording can also be ended by moving the camera to the end of the guide.
Taking Pictures with Manual Focus
Applicable modes: 
Use this function when you want to fix the focus or when the distance between the lens 
and the subject is determined and you do not want to activate Auto Focus.
Recording from left to right
•
Move the camera at a constant speed.
Pictures may not be able to be recorded properly if 
the camera is moved too fast or slow.
A
Recording direction and 
panning (Guide)
When using an interchangeable lens (H-FS12032) with no focus ri ng
Press  1: Focuses on close-up subjects
Press  2: Focuses on distant subjects
A Slide bar•These operations are possible only on the 
focus adjustment screen.
•Pressing and holding  2/1 will increase the 
focus speed.
•Focus can also be adjusted by dragging the slide bar.
A
0ê0ô0ð
AF
++
A
DMC-GM5K-SQT0419_eng.book  23 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							Recording
24SQT0419 (ENG) 
1Set the focus mode dial to [MF].
2Press 2 ().
3Press 3/ 4/2/1 to determine the area to 
be enlarged, and press [MENU/SET].
•The assist screen is displayed, enlarging the area. 
(MF Assist)
•If you press [DISP.], the area to be enlarged will be 
reset to the center.
4Adjust the focus.
A Indicator for ¶  (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
•The in-focus portions will be highlighted. (Peaking)•You can check whether the point of focus is to the near 
side or to the far side. (MF Guide)
You can perform the following operations:
¢ When using an interchangeable lens with no focus ring, you can  perform these 
operations after pressing 4 to display the screen that lets you set the area to be 
enlarged.
5Press the shutter button halfway.
•The assist screen will close. The recording screen will be disp layed.•You can also close the assist screen by pressing [MENU/SET].
Button operationTouch operationDescription of operation
3/4/2 /1¢Dragging Moves the enlarged area
sPinching in/out Enlarges/reduces the screen (by steps of 0.1k)
sEnlarges/reduces the screen (by steps of 1.0k)
Switches the enlarged display (windowed/full 
screen)
[DISP.]¢[Reset]¢Resets the area to be enlarged back to the 
center.
AF
+ +
B
DAC
DMC-GM5K-SQT0419_eng.book  24 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							25
Recording
 (ENG) SQT0419
Recording Motion Picture
Applicable modes: 
This camera can record full high definition motion pictures compatible with the AVCHD 
format or motion pictures recorded in MP4.
Audio will be recorded in stereo.
1Start recording by pressing the motion 
picture button.
A Elapsed recording time
B  Available recording time
•Recording of motion picture appropriate for each 
mode is possible.
•The recording state indicator (red)  C will flash while 
recording motion pictures.
•If approximately 1 minute elapses without an 
operation being performed, part of the display will 
disappear. Press [DISP.] or touch the monitor to make 
the display reappear.
•Release the motion picture button right after you press 
it.
2Stop the recording by pressing the motion picture button again.
•Still picture recording is also possible during the motion pict ure recording by fully 
pressing the shutter button.
•When a high ambient temperature, continuous recording or other  conditions cause the camera 
to overheat, the following restrictions will occur to protect the camera. Wait until the camera 
cools down.
–Continuous recording, motion picture recording, and the Wi-Fi c onnection will be temporarily 
disabled.
–If you continue recording even when [ ] is flashing on the scree n, a message will be 
displayed and the camera will turn off automatically.
•It is recommended to use a fully charged battery or AC adaptor  (DMW-AC10PP: optional) when 
recording motion pictures.
•If while recording motion pictures using the AC adaptor (DMW-AC 10PP: optional) the power 
supply is cut off due to a power cut or if the AC adaptor (DMW- AC10PP: optional) is 
disconnected etc., the motion picture will not be recorded.
•Maximum time to record motion pictures continuously with [MP4]  is 29 minutes 59 seconds or 
up to 4 GB.
(For [FHD/28M/60p]/[FHD/20M/30p] in [MP4] format, the file size  is large and so the recordable 
time will drop below 29 minutes 59 seconds.)
3s3s3s
R1m3737sR1m37s
C
B
A
DMC-GM5K-SQT0419_eng.book  25 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							Recording
26SQT0419 (ENG) 
Recording Snap Movies
Applicable modes: 
You can specify the recording time in advance and record motion pictures casually like you 
take snapshots. The function also allows you to shift a focus a t the start of recording and 
add fade in/out effects in advance.
•
Motion pictures will be recorded with [FHD/20M/30p] in [MP4].•Using the smartphone/tablet app “ Panasonic Image App ”, you can  combine motion pictures 
recorded with the camera. Music can be added and various editin g operations can be 
performed when you combine them. In addition, you can send the  combined motion picture to a 
web service.
1Select the menu. (P20)
2Select [SET] with  3/4, and then press [MENU/SET] .
3Press 3/ 4 to select an item and then press [MENU/SET].
4Press [ ].
5Press [MENU/SET].
6Select [ON] with  3/4, and then press [MENU/SET] .
•Press the shutter button halfway to exit the menu.
•If [Pull Focus] is set to [ON], set its focus.
7Start recording by pressing the motion 
picture button.
A Elapsed recording time
B Set recording time
•Release the motion picture button right after you press it.
•You cannot stop motion picture recording in the 
middle.The recording will stop automatically when the 
set recording time has elapsed.
∫To deactivate Snap Movie
Select [OFF] in step 2.
•
For details, refer to the “Owner’s Manual for advanced features  (PDF  format)”.
> [Motion Picture]  > [Snap Movie]
[Record time] Sets the recording time of motion pictures.
[Pull Focus]Allows dramatic imaging expression by shifting focus gradually 
at 
the start of recording.
[Fade] Adds a fade-in (gradual appearance) effect to an image and audi
o 
as recording starts or adds a fade-out (gradual disappearance) 
effect to them as recording ends.
MENU
3s3s3s
4s4s4s
SNAP 4SEC
A
B
DMC-GM5K-SQT0419_eng.book  26 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							27
Playback
 (ENG) SQT0419
Playing Back Pictures
1Press [(].
2Press 2/1.
Playing Back Motion Pictures
This unit was designed to play motion pictures using the AVCHD,  MP4 and QuickTime 
Motion JPEG formats.
•
Motion pictures are displayed with the motion picture icon 
([ ]).
Press  3 to play back.
A Motion picture recording time
∫Operations during Motion Picture Playback 2: Play back the previous picture
1: Play back the next picture
Sending an image to a web service
If you press 
4 when displaying images one by one, you can easily send an imag e to a 
web service. 
•
For details, refer to the “Owner’s Manual for advanced features  (PDF  format)”.
Button 
operationTouch 
operationDescription of  operationButton 
operationTouch 
operationDescription of  operation
3Play/Pause4St o p
2
Fast rewind¢
1
Fast forward¢
Frame-by-frame 
rewind
(while pausing)Frame-by-frame 
forward
(while pausing)
Reduce volume levelIncrease volume 
level
¢ The fast forward/rewind speed increases if you press  1/2 again.
•If you press [MENU/SET] during a pause, you can create a pictur e from a motion picture.
12s12s 12s
12s
A
DMC-GM5K-SQT0419_eng.book  27 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							Playback
28SQT0419 (ENG) 
Deleting Pictures
Once deleted, pictures cannot be recovered.
¢Picture groups are treated as a single picture.
(All the pictures in the selected picture group will be deleted .)
To delete a single picture
1In Playback Mode, select the picture to 
delete and then press [ ].
•The same operation can be performed by touching 
[].
2Press 3 to select [Delete Single] and then 
press [MENU/SET].
•Confirmation screen is displayed.
Picture is deleted by selecting [Yes].
To delete multiple pictures (up to 100¢) or all the pictures
1In Playback Mode, press [ ].
2Press 3/4 to select [Delete Multi] or [Delete All] and then press 
[MENU/SET].
•[Delete All]  > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
•It is possible to delete all pictures except the ones set as fa vorite when  [All Delete 
Except Favorite]  is selected with the [Delete All] set.
3(When [Delete Multi] is selected)
Press 3/ 4/2/1 to select the picture, and 
then press [MENU/SET] to set.  (Repeat this 
step.)
•[ ‚ ] appears on the selected pictures.
If [MENU/SET] is pressed again, the setting is canceled.
4(When [Delete Multi] is selected)
Press 2 to select [OK], and then press [MENU/SET] to execute.
•Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
HOHWH6LQJOH
HOHWH0XOWL
HOHWH$OO
2.
DMC-GM5K-SQT0419_eng.book  28 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							29
Wi-Fi
 (ENG) SQT0419
What you can do with the Wi-FiR function
•The camera cannot be used to connect to a public wireless LAN connection.
Controlling with a Smartphone/Tablet (P31)
•
Recording with a smartphone (P31)•Playing back pictures in the camera (P31)
•Saving images stored in the camera (P32)•Sending images to an SNS (P32)•Writing location information on images stored in the camera 
(P32)
•Combining motion pictures recorded with Snap Movie according to  your preference on a 
smartphone/tablet (P32)
Displaying pictures on a TV
Printing Wirelessly
When sending images to AV device
When sending images to PC
Using Web services
This owner's manual refer to bot h smartphones and tablets as “smartphones” from this 
point on unless noted otherwise.
•
For details, refer to the “Owner’s Manual for advanced features  (PDF  format)”.
Installing the smartphone/tablet app “ Image App ”
•OS
App for AndroidTM: Android 2.3.3 or higher¢
>Search the Google PlayTM Store for “ Panasonic Image App ” or “ LUMIX ”, and install the 
app.
App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS  is not supported.)>Search the App StoreSM for “ Panasonic Image App ” or “ LUMIX ”, and install the app.
¢ Connecting to this unit with [Wi-Fi Direct] requires  Android OS  4.0 or higher and Wi-Fi 
Direct
R support.•Use the latest version.•Supported OSs are current as of September 2014 and are subject to change.
•Read the [Help] in the “ Image App ” menu for further details on  how to operate.•The service may not be able to be used properly depending on the type of smartphone being 
used.
For information on the “ Image App ”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
•When downloading the app on a mobile network, high packet commu nication fees may be 
incurred depending on the details of your contract.
Web
DMC-GM5K-SQT0419_eng.book  29 ページ  ２０１４年９月８日　月曜日　午後５時３４分 
						

							Wi-Fi
30SQT0419 (ENG) 
Connecting to a smartphone/tablet
1Press and hold [Wi-Fi] on the camera.
2Start “ Image App ” on your smartphone/tablet.3Select [QR code], and then select [OK] .4Using “ Image App ”, scan the QR code displayed on the screen of the camera.
•If you press [MENU/SET] on the camera, the QR code will be enla rged. When it is difficult 
to scan the QR code, try enlarging it.
5Install the profile of “ IMAGE APP ” .
•A message will be displayed on the browser.•If the smartphone/tablet is locked with a passcode, enter the 
passcode to unlock the smartphone/tablet.
6Press the home button to close the browser.7Turn on the Wi-Fi function in 
the setting menu of the 
smartphone/tablet .
8Select the SSID displayed on 
the screen of the camera.
9Return to the home screen, 
and then start “ Image App ”.
•
Steps 2 through 6 are not required from the second time on.
1Press and hold [Wi-Fi] on the camera.
2Start “ Image App ” on your smartphone/tablet.
If you are using an iOS device [iPhone/iPod touch/iPad]
Using the QR code to set up a connection 
If you are using an Android device
Using the QR code to set up a connection 
0ø1
0Î0ç1

0ç10Ò
QR code
IMAGE APPPanasonic Corporation
Wi-FiWi-Fi
0123456789ABC
0ø1
0Î0ç1
0ç10Ò
QR code
DMC-GM5K-SQT0419_eng.book  30 ページ  ２０１４年９月８日　月曜日　午後５時３４分