Panasonic Digital Camera Dmc Gm1 Owners Manual

							261
12. Using the Wi-Fi function
Using Web services
You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”.
By setting up automatic transfers of pictures and motion pictures to the Cloud Sync 
Service, you can receive the transferred pictures or motion pictures on a PC or 
smartphone.
Click the followings to jump to the beginning of each menu.
•
When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
A
Wireless access point BWeb service CCloud Sync Service
Preparations:
To send images to a web service or a cloud folder, you need to register to “LUMIX 
CLUB”  (P267).
To send images to a web service, you need to register the web service.  (P263)
When sending images to web service P262
When sending images to [Cloud Sync. Service] P265
-6.*9
$-6# 
						

							262
12. Using the Wi-Fi function
∫Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the web service.•For details on how to send images, refer to  P280.
Click the followings to jump to the beginning of each menu.
•
Images uploaded to the web service cannot be displayed or deleted with this camera. Check 
images by accessing the web service with your smartphone/tablet or computer.
•If sending images fails, a report email outlining the failure will be sent to the email address 
registered with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image 
was taken. Check this information before uploading images to web services.
When sending images to web service
JPEGRAWMP4AV C H D3D
Sending an image each time a 
recording is made
([Send Images While Recording]) ±
——— ±
Select and send the images
( [Send Images Stored in the Camera] ) ±
— ±— ±
Sending an image each time a recording is made ([Send Images While 
Recording] )P263
Select and send the images ([Send Images Stored in the Camera]) P264
•Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc. 
of images uploaded on web services.
•When uploading images to the web service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the web service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							263
12. Using the Wi-Fi function
When sending images to web services, the web service being used must be registered 
with the “LUMIX CLUB”.
 (P267)•Check the “FAQ/Contact us” on the following site for compatible web services.
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the web service you want to use, and 
have the login information available.
1Connect to the “LUMIX CLUB” site using a smartphone/tablet or computer.
http://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the service. 
(P267)
3Register your email address.
4Select the web service to be used and register it.
•Follow the instructions on the screen to register the service.
1Select the menu.
2Select [Via Network], and connect.  (P274)
3Select a web service you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P282)
4Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P242)
You cannot change the settings while sending pictures. Wait until sending is complete.
Registering web services
Sending an image each time a recording is made ([Send Images While 
Recording] )
[Wi-Fi] >[New Connection]  > [Send Images While Recording]  > [Web 
service] 
						

							264
12. Using the Wi-Fi function
1Select the menu.
2Select [Via Network], and connect. (P274)3Select a web service you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P282)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P242)
Select and send the images ([Send Images Stored in the Camera])
[Wi-Fi] >[New Connection]  > [Send Images Stored in the Camera] >  [Web 
service]
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
6HW
2. 
						

							265
12. Using the Wi-Fi function
∫Using [Cloud Sync. Service]  (as of October 2013)
•
If you set the picture destination to [Cloud Sync. Service], sent pictures are temporarily saved 
in the cloud folder, and they can be synchronized with the device in use, such as the PC or 
smartphone/tablet.
•A Cloud Folder stores transferred images for 30 days (up to 1000 pictures). Transferred images 
are deleted automatically 30 days after the transfer. Furthermore, when the number of stored 
images exceeds 1000, some images may be deleted depending on the [Cloud Limit]  (P282) 
setting even within 30 days after the transfer.
•When the download of images from a Cloud Folder to all specified devices is complete, images 
may be deleted from the Cloud Folder even within 30 days after the transfer.
∫ Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P280.
Click the followings to jump to the beginning of each menu.
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P267) and configure the Cloud Sync. setting to 
send a picture to a Cloud Folder.
For a PC, use “ PHOTOfunSTUDIO ” to set up Cloud Sync settings. For a smartphone/
tablet, use “ Image App ” to set them up.
JPEGRAWMP4AV C H D3D
Sending an image each time a 
recording is made
([Send Images While Recording]) ±
——— ±
Select and send the images
( [Send Images Stored in the Camera] ) ±
— ±— ±
Sending an image each time a recording is made ([Send Images While 
Recording] )P266
Select and send the images ([Send Images Stored in the Camera]) P266 
						

							266
12. Using the Wi-Fi function
1Select the menu.
2Select [Via Network], and connect. (P274)
3Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P282)
4Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P242)
You cannot change the settings while sending pictures. Wait until sending is complete.
1Select the menu.
2Select [Via Network], and connect.  (P274)
3Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P282)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P242)
Sending an image each time a recording is made ([Send Images While 
Recording] )
[Wi-Fi] >[New Connection]  > [Send Images While Recording]  > [Cloud 
Sync. Service]
Select and send the images ([Send Images Stored in the Camera]) [Wi-Fi] >[New Connection]  > [Send Images Stored in the Camera] >  
[Cloud Sync. Service]
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
6HW
2. 
						

							267
12. Using the Wi-Fi function
Registering to the “LUMIX CLUB”
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using, or transfer these images to web services.
Use the “LUMIX CLUB” when uploading pictures to web services or external AV device.
•
You can set the same “LUMIX CLUB” login ID for this unit and a smartphone/tablet. (P270)
1Select the menu. (P37)
2Select [Set/Add Account].
3Select [New account].
•Connect to the network.
Proceed to the next page by selecting [Next].
•A confirmation screen will be displayed if a login ID has 
already been acquired for the camera. Select [Yes] to 
acquire a new login ID, or [No] if you do not need to acquire 
a new login ID.
4Select the method for connecting to a wireless access point, and set.
•Refer to P274 for details.
•A setting screen will be displayed only when connecting for the first time.
Once you set the connection method, it will be saved on this unit and used when 
connecting the next time. To change the wireless access point you want to connect to, 
press [DISP.], and change the connection destination.
•Proceed to the next page by selecting [Next].
About the [LUMIX CLUB]
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note:
•The service may be suspended due to regular maintenance or unexpected troubles, and 
the service contents may be changed or added, without prior notice to the users.
•The service may be stopped in whole or in part with a reasonable period of advance notice.
Acquiring a new login ID ([New account])
[MENU] > [Setup]  > [Wi-Fi]  > [Wi-Fi Setup]  > [LUMIX CLUB] 
						

							268
12. Using the Wi-Fi function
5Read through the “LUMIX CLUB” terms of use and select [Agree].
•You can switch pages by 3/4.•The display can be enlarged (2 k) by rotating the control dial to the right.
•The enlarged display can be reset to its original size (1 k) by rotating the control dial to the 
left.
•You can move the position of the enlarged display with  3/4/2/1.
•Press [ ] to cancel the process without acquiring a login ID.
6Enter a password.
•Enter any combination of 8 to 16 characters and numbers for the password.
•For details on how to enter characters, refer to “Entering Text” section on  P54.
7Check the login ID and select [OK].
•The login ID (12-digit number) will be displayed 
automatically.
When logging in to the “LUMIX CLUB” with a computer, 
you only need to enter the numbers.
•A message is displayed when the connection is complete. 
Select [OK].
•Be sure to make a note of the login ID and password.
•Exit the menu after it is set. 
						

							269
12. Using the Wi-Fi function
Preparation:
When using the acquired login ID, check the ID and password.
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” 
website from your smartphone/tablet or PC and change the “LUMIX CLUB” password in 
advance.
•
The login ID and password registered to the “LUMIX CLUB” cannot be changed on this unit.
1Select the menu. (P37)
2Select [Set/Add Account].
3Select [Set Login ID].
•The login ID and password are displayed.
•The password is displayed as “ ”.
•Close the menu if only checking the login ID.
4Select the item to change.5Enter the login ID or password.
•Refer to “Entering Text” (P54)  for information on how to 
enter text.
•Enter the new password you have created on your 
smartphone/tablet or PC into the camera. If the password 
differs from the one you created on your smartphone/tablet 
or PC, you will not be able to upload images.
•Exit the menu after it is set.
Using the acquired login ID/Checking or changing the login ID or password ([Set 
Login ID])
[MENU] > [Setup]  > [Wi-Fi]  > [Wi-Fi Setup]  > [LUMIX CLUB] 
						

							270
12. Using the Wi-Fi function
•Setting the same login ID on this unit and your smartphone/tablet is convenient for sending 
images on this unit to other devices or web services.
Check the details if the terms of use have been updated.
1Select the menu. (P37)
2Select [Terms of use].
•The camera will connect to the network and the terms of use will be displayed.
Close the menu after checking the terms of use.
To set the same login ID for the camera and the smartphone/tablet
When either this unit or the smartphone/tablet has acquired the login ID:
1Connect this unit to the smartphone/tablet. (P246)2From the “ Image App ” menu, set the common login ID.
•The login IDs for this unit and the smartphone/tablet become the same.
•After connecting this unit to the smartphone/tablet, the setup screen for a common login ID 
may appear when you display the playback screen. You can also set a common login ID by 
following the on-screen instructions.
•This operation is not available for [Wi-Fi Direct] connection.
When this unit and the smartphone/tablet have acquired different login IDs:
(When you want to use the smartphone’s/tablet’s login ID for this unit)
Change the login ID and password for this unit to those acquired by the 
smartphone/tablet.
(When you want to use this unit’s login ID for the smartphone/tablet)
Change the login ID and password for the smartphone/tablet to those acquired by 
this unit.Check the “LUMIX CLUB” terms of use
[MENU] > [Setup]  > [Wi-Fi]  > [Wi-Fi Setup]  > [LUMIX CLUB]