Panasonic Digital Camera Dmc Gh4 Owners Manual
Here you can view all the pages of manual Panasonic Digital Camera Dmc Gh4 Owners Manual . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
41 2. Getting Started/Basic Operations Rotate the mode dial to switch the Recording Mode. Press the mode dial lock button 1 to release the lock. •The dial is locked if the mode dial lock button is depressed. Each press locks/unlocks the dial. Rotate the mode dial 2 and adjust the recording mode. •After adjusting the recording mode, press the mode dial lock button to lock the dial. Mode dial (Selecting a Recording Mode) Intelligent Auto Mode (P69) The subjects are recorded using settings...
Page 42
![Page 42
2. Getting Started/Basic Operations
42
Rotating:
Selection of items or setting of values is performed during the various settings.
•
This owner’s manual describes operations of the rear dial/front dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in / / /
modes.
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and
rear dial. (P312)
Rotating the control dial:
Selection of items or setting of values etc., is performed....](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-41.png "Page 42
2. Getting Started/Basic Operations
42
Rotating:
Selection of items or setting of values is performed during the various settings.
•
This owner’s manual describes operations of the rear dial/front dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in / / /
modes.
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and
rear dial. (P312)
Rotating the control dial:
Selection of items or setting of values etc., is performed....")
2. Getting Started/Basic Operations 42 Rotating: Selection of items or setting of values is performed during the various settings. • This owner’s manual describes operations of the rear dial/front dial as follows: Allows you to set the aperture, shutter speed, and other settings when in / / / modes. • In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and rear dial. (P312) Rotating the control dial: Selection of items or setting of values etc., is performed....
Page 43
![Page 43
43
2. Getting Started/Basic Operations
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
•
This owner’s manual expresses the up, down, left, and right of
the cursor button as 3/4/2 /1.
Even when the camera is operated using the touch screen, it
is possible to operate with the cursor button and [MENU/SET]
button if a guide like the one shown on the right is displayed.
Even on menu screens...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-42.png "Page 43
43
2. Getting Started/Basic Operations
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
•
This owner’s manual expresses the up, down, left, and right of
the cursor button as 3/4/2 /1.
Even when the camera is operated using the touch screen, it
is possible to operate with the cursor button and [MENU/SET]
button if a guide like the one shown on the right is displayed.
Even on menu screens...")
43 2. Getting Started/Basic Operations Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed. • This owner’s manual expresses the up, down, left, and right of the cursor button as 3/4/2 /1. Even when the camera is operated using the touch screen, it is possible to operate with the cursor button and [MENU/SET] button if a guide like the one shown on the right is displayed. Even on menu screens...
Page 44
![Page 44
2. Getting Started/Basic Operations
44
Press [DISP.] to switch the information displayed on the
screen.
•
You can select between [ ] (monitor style) and [ ] (viewfinder style) for each of the
monitor and the viewfinder display screen using [Monitor Disp. Style] and [LVF Disp.Style] in
the [Custom] menu.
([ ] monitor style)
•Screen will switch as follows:
(Example of monitor display)
¢ 1 Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309)
It is also possible to...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-43.png "Page 44
2. Getting Started/Basic Operations
44
Press [DISP.] to switch the information displayed on the
screen.
•
You can select between [ ] (monitor style) and [ ] (viewfinder style) for each of the
monitor and the viewfinder display screen using [Monitor Disp. Style] and [LVF Disp.Style] in
the [Custom] menu.
([ ] monitor style)
•Screen will switch as follows:
(Example of monitor display)
¢ 1 Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309)
It is also possible to...")
2. Getting Started/Basic Operations 44 Press [DISP.] to switch the information displayed on the screen. • You can select between [ ] (monitor style) and [ ] (viewfinder style) for each of the monitor and the viewfinder display screen using [Monitor Disp. Style] and [LVF Disp.Style] in the [Custom] menu. ([ ] monitor style) •Screen will switch as follows: (Example of monitor display) ¢ 1 Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309) It is also possible to...
Page 45
![Page 45
45
2. Getting Started/Basic Operations
([ ] viewfinder style)
•Screen will switch as follows:
(Example of display on viewfinder)
¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309)
It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom]
menu to [ON]. (P310)
•If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P309)•If no operation is performed, part of the information on the screen will gradually...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-44.png "Page 45
45
2. Getting Started/Basic Operations
([ ] viewfinder style)
•Screen will switch as follows:
(Example of display on viewfinder)
¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309)
It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom]
menu to [ON]. (P310)
•If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P309)•If no operation is performed, part of the information on the screen will gradually...")
45 2. Getting Started/Basic Operations ([ ] viewfinder style) •Screen will switch as follows: (Example of display on viewfinder) ¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309) It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom] menu to [ON]. (P310) •If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P309)•If no operation is performed, part of the information on the screen will gradually...
Page 46
![Page 46
2. Getting Started/Basic Operations
46
∫ About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1Press [DISP.] to display the tilt sensor.
2Check the tilt of the camera.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
•When the tilt of the camera is little, the indicator changes to green.
•When recording with a vertical orientation, the display automatically switches to a
vertically orientated...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-45.png "Page 46
2. Getting Started/Basic Operations
46
∫ About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1Press [DISP.] to display the tilt sensor.
2Check the tilt of the camera.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
•When the tilt of the camera is little, the indicator changes to green.
•When recording with a vertical orientation, the display automatically switches to a
vertically orientated...")
2. Getting Started/Basic Operations 46 ∫ About the tilt sensor display With the tilt sensor displayed, it is easy to correct the tilt of the camera etc. 1Press [DISP.] to display the tilt sensor. 2Check the tilt of the camera. A Horizontal direction: Correcting tilt to the left B Vertical direction: Correcting downward tilt •When the tilt of the camera is little, the indicator changes to green. •When recording with a vertical orientation, the display automatically switches to a vertically orientated...
Page 47
![Page 47
47
2. Getting Started/Basic Operations
•Screen will switch as follows:
¢ 1 If no operation is performed, part of the information on the screen will gradually become
darker after approximately 10 seconds has passed, and will no longer be displayed after
approximately 1 minute has passed. Pressing t he [DISP.] button or touching the monitor will
make the display reappear. This operation is to prevent screen burn-in and is not a
malfunction.
¢ 2 Not displayed during playback zoom, motion picture...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-46.png "Page 47
47
2. Getting Started/Basic Operations
•Screen will switch as follows:
¢ 1 If no operation is performed, part of the information on the screen will gradually become
darker after approximately 10 seconds has passed, and will no longer be displayed after
approximately 1 minute has passed. Pressing t he [DISP.] button or touching the monitor will
make the display reappear. This operation is to prevent screen burn-in and is not a
malfunction.
¢ 2 Not displayed during playback zoom, motion picture...")
47 2. Getting Started/Basic Operations •Screen will switch as follows: ¢ 1 If no operation is performed, part of the information on the screen will gradually become darker after approximately 10 seconds has passed, and will no longer be displayed after approximately 1 minute has passed. Pressing t he [DISP.] button or touching the monitor will make the display reappear. This operation is to prevent screen burn-in and is not a malfunction. ¢ 2 Not displayed during playback zoom, motion picture...
Page 48
![Page 48
2. Getting Started/Basic Operations
48
Press [LVF] to switch between the Monitor and Viewfinder.A Eye sensor
Press [LVF].
•The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated. (P306)
•You can also switch between the viewfinder and the monitor in [LVF/Monitor Switch] in [Eye
Sensor] in the [Custom] menu. (P313)
∫Using the eye sensor to switch between the Monitor and Viewfinder...](http://img.usermanuals.tech/thumb/58/64917/w300_dmc-gh4_en_adv_om_d-47.png "Page 48
2. Getting Started/Basic Operations
48
Press [LVF] to switch between the Monitor and Viewfinder.A Eye sensor
Press [LVF].
•The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated. (P306)
•You can also switch between the viewfinder and the monitor in [LVF/Monitor Switch] in [Eye
Sensor] in the [Custom] menu. (P313)
∫Using the eye sensor to switch between the Monitor and Viewfinder...")
2. Getting Started/Basic Operations 48 Press [LVF] to switch between the Monitor and Viewfinder.A Eye sensor Press [LVF]. •The monitor/viewfinder will switch as follows: ¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the focus as the eye sensor is activated. (P306) •You can also switch between the viewfinder and the monitor in [LVF/Monitor Switch] in [Eye Sensor] in the [Custom] menu. (P313) ∫Using the eye sensor to switch between the Monitor and Viewfinder...
Page 49
49 2. Getting Started/Basic Operations Touch panel of this unit is capacitive. Touch the panel directly with your bare finger. ∫ Touch To touch and release the touch screen. • When selecting features using the touch screen, be sure to touch the center of the desired icon. ∫ Drag A movement without releasing the touch screen. This can also be used to move to the next image during playback, etc. ∫ Pinch (enlarge/reduce) Pinch the touch panel apar t (enlarge) or together (reduce) with two fingers. Touch...
Page 50
2. Getting Started/Basic Operations 50 •Touch the panel with the clean and dry finger.•If you use a commercially available monitor protecti on sheet, please follow the instructions that accompany the sheet. (Some monitor protection sheets may impair visibility or operability.) •Do not press on the monitor with hard pointed tips, such as ball point pens.•Do not operate with your fingernails. •Wipe the monitor with dry soft cloth when it gets dirty with finger prints and others.•Do not scratch or press...