Panasonic Digital Camera Dmc Gh3 Owners Manual

261
Connecting to other equipment
1Press 3.
2Press  3/4  to select an item and then press [MENU/SET].
Selecting a single picture and printing it
1Press 
2/1  to select the picture and then press 
[MENU/SET].
2Press  3 to select [Print start] and then press 
[MENU/SET].
•
Refer to P262  for the items that can be set before starting to print the pictures.
•Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
ItemDescription of settings
[Multi Select] Multiple...

262
Connecting to other equipment
Select and set the items both on the screen in step 2 of the “Selecting a single 
picture and printing it” and in step 
3 of the “Selecting multiple pictures and printing 
them” procedures.
•
When you want to print pictures on a paper size or a layout which is not supported by the 
camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on 
the printer. (For details, refer to the operating instructions of the printer.)
•When [Print Set...

263
Connecting to other equipment
∫[Paper Size]
•
Paper sizes not supported by the printer will not be displayed.
∫ [Page Layout] (Layouts for printing that can be set with this unit)
•
An item cannot be selected if the printer does not support the page layout.
∫ Layout printing
When printing a picture several times on 1 sheet of paper.
For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page 
Layout] to [ ä] and then set [Num.of prints] to 4 for the picture that you want...

264
Connecting to other equipment
•The camera is receiving an error message from the printer when the [¥] indication lights 
orange during printing. After finishing printing, make sure there are no problems with the 
printer.
•If the number of prints is high, the pictures may be printed several times. In this case, the 
remaining number of prints indicated may differ from the number set.
•Only pictures taken in JPEG format can be pr inted. Those taken in RAW will use the JPEG 
pictures that were...

265
Others
Optional accessories
After attaching the external flash (DMW-FL360L, DMW-FL220, DMW-FL360, 
DMW-FL500: optional), the effective range will be increased when compared to the 
camera’s built in flash.
∫Using the dedicated flash (DMW-FL360L: optional)
Preparations:
•
Close the built-in flash, and then turn this unit off.•Remove the hot shoe cover that is attached to the camera.
1Attach the dedicated flash to the hot shoe and then turn on the camera and the 
dedicated flash.
2Select [Flash] on the...

266
Others
∫When using other commercially available external flashes without 
communication functions with the camera (DMC-GH3)
•
It is necessary to set the exposure on the external flash. If you want to use the external flash in 
Auto Mode, use an external flash that allows you to set the aperture value and the ISO 
sensitivity to match the settings on the camera.
•Set to Aperture-Priority AE Mode or Manual Exposure Mode on the camera and then set the 
same aperture value and ISO sensitivity on the...

267
Others
Using the stereo shotgun microphone (DMW-MS2:optional), you can switch between the 
gun (ultra-directional) recording and the wide range stereo recording.
Preparations:
•
Close the built-in flash, and then turn this unit off.•Remove the hot shoe cover that is attached to the camera. (P265)
1Attach the dedicated stereo shotgun microphone to this unit, and then turn this 
unit on.
2Select [Special Mic.] on the [Motion Picture] menu. (P37)
•The menu items are displayed only when the stereo...

268
Others
Using a battery grip (DMW-BGGH3: optional) improves ease of operation and grip when 
held vertically. Installing a spare battery will allow you to record for a longer time.
∫ Setting a priority for the use of spare batteries
You can set which battery should be used when t he battery is inserted to both this unit and 
the battery grip.
Preparations:
•
Turn this unit off, and then remove the terminal cover.
1Attach the battery grip to this unit, and then turn this unit on.2Select [Battery Use...

269
Others
By connecting the AC adaptor (optional), and then plugging them into an electrical socket, 
you can connect this unit to a PC or printer and use without worrying about the capacity of 
the battery. To use the AC adaptor, a DC coupler (optional) is required.
•
Always use a genuine Panasonic AC adaptor (optional).•When using an AC adaptor, use the AC  cable supplied with the AC adaptor.
•When the DC coupler is being mounted, the DC coupler cover opens, so the structure ceases 
to be dust-proof...

270
Others
Monitor Display/Viewfinder Display
•The following images are examples of when the display screen is set to [ ] (monitor 
style) in the monitor.
∫In recording
Recording in Program AE Mode [ ] On-monitor recording information
1 Recording Mode (P84)
2 Photo Style  (P158)
3 Flash Mode  (P125)
4 REC MODE (when recording motion  pictures)/Recording quality  (P177)
5 Picture size  (P160)
6 Quality  (P161)
7 Focus Mode  (P142)
8AF Mode  (P141)
9 : Single
¢ 1 (P68)
: Burst  (P153)
: Auto Bracket...