Panasonic Digital Camera Dmc Gf7k Owners Manual For Advanced Features

							231
10. Playing Back and Editing Images
You can erase unnecessary parts recorded 
on the pictures taken.
•
The erasure operation can only be performed 
by touching. [Clear Retouch]  automatically 
enables the touch operation.
1Select the menu. (P53)
2Press 2/1  to select a picture, and then press [MENU/SET].
3Drag your finger over the part you want to delete.
•The parts to be erased are colored.
•Touching [Undo] will return the colored part back to its 
previous state.
4Touch  [Set].
•Preview screen is displayed.
5Touch [Save] or press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
Exit the menu after it is executed.
[Clear Retouch]
>  [Playback]  > [Clear Retouch]
Erasing details (enlarging the display)
1 Touch  [SCALING].
•
Pinching out/pinching in (P48) the screen allows you 
to enlarge/reduce it.
•You can also enlarge/reduce the picture by rotating 
the control dial.
•Dragging the screen allows you to move the 
enlarged part.
2 Touch  [REMOVE].
•This will bring you back to the operation of dragging your finger over the part you 
want to delete. The part you want to delete can be dragged even  while the picture is 
enlarged.
MENU
6HW
6&$/,1*
5(029(
8QGR
8QGR
6&$/,1*
5(029(
6HW 
						

							10. Playing Back and Editing Images
232
•Pictures may appear unnatural because the background of deleted parts is artificially created.
•For group pictures, perform [Clear Retouch] on each picture.
(They cannot be edited at once.)
•When [Clear Retouch] is performed on group pictures, they are s aved as new pictures separate 
from the original ones.
Not available in these cases:
•
This function is not available in the following cases:–Pictures taken in Panorama Shot Mode–Motion pictures 
–Pictures taken with [ ] 
						

							233
10. Playing Back and Editing Images
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [Text Stamp]  (P234).
1Select the menu.  (P53)
3Enter the text. (P69)
•Exit the menu after it is set.
•To delete the title, erase all the text in the text input scree n.
•You can print out texts (comments) using the “ PHOTOfunSTUDIO ” b undled software on the 
DVD (supplied).
•You can set up to 100 pictures at one time with [Multi].
Not available in these cases:
•
This function is not available in the following cases:
–Motion pictures–Images recorded with [Quality] set to [ ], [ ] or [ ]
[Title Edit]
>  [Playback]  > [Title Edit]  > [Single]/[Multi]
2Select the picture.
•[’] is displayed for pictures with titles already registered.
[Single] setting
1 Press  2/1  to select the picture.
2 Press [MENU/SET].
[Multi] setting
1 Press  3/4 /2/ 1 to select the picture and then press 
[MENU/SET] (repeat).
•
The setting is canceled when [MENU/SET] is pressed 
again.
2 Press  2 to select [OK], and then press [MENU/SET] 
to execute.
MENU
6HW
2. 
						

							10. Playing Back and Editing Images
234
You can stamp the recording date/time, name, location, travel date or title onto the 
recorded pictures.
1Select the menu. (P53)
3Press 3/4  to select [Set], and then press [MENU/SET].
[Text Stamp]
>  [Playback]  > [Text Stamp]  > [Single]/[Multi]
2Select the picture.
•[‘ ] appears on screen if the picture is stamped with text.
[Single] setting
1 Press  2/1  to select the picture.
2 Press [MENU/SET].
[Multi] setting
1 Press  3/4 /2/ 1 to select the picture and then press 
[MENU/SET] (repeat).
•
The setting is canceled when [MENU/SET] is pressed 
again.
2 Press  2 to select [OK], and then press [MENU/SET] 
to execute.
LISALISALISA
MENU
6HW
2. 
						

							235
10. Playing Back and Editing Images
4Press 3/4  to select text stamp items, and then press [MENU/SET].5Press  3/4  to select the settings, and then press [MENU/SET].
6Press [ ].7Press  3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
Exit the menu after it is executed.
[Shooting Date] [W/O TIME]:
Stamp the year, month and date.
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []
([Face 
Recognition])
:Name registered in [Face Recog.] will be 
stamped.
[]
([Baby/Pet]) :Name registered in [Profile Setup] will be 
stamped.
[OFF]
[Location] [ON]:
Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date] [ON]:
Stamps the travel date set under [Travel Date].
[OFF]
[Title] [ON]:
Title input in the [Title Edit] will be stamped.
[OFF] 
						

							10. Playing Back and Editing Images
236
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 100 pictures at one time in [Multi].•The picture quality may deteriorate when text stamping is carri ed out.
•Depending on the printer being used, some characters may be cut  at printing. Check before 
printing.
•When you stamp pictures in a group, the stamped ones are saved  separately from the original 
ones in the group.
Not available in these cases:
•
This function is not available in the following cases:–Motion pictures–Pictures taken in Panorama Shot Mode
–Pictures recorded without setting the clock and title–Pictures stamped with [Text Stamp]–Pictures taken with [ ] 
						

							237
10. Playing Back and Editing Images
Recorded motion picture can be divided in two. It is recommended for when you want to 
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divid e!
1Select the menu. (P53)
2Press 2/1  to select the motion picture to divide, and then press [MENU/S ET].
Not available in these cases:
•
Avoid trying to divide motion pi cture near the very beginning or end of the motion picture.•This function is not available in the following case:–Motion pictures with a short recording time
[Video Divide]
> [Playback]  > [Video Divide]
3Press  3 at the location to divide.
•
You can finely adjust the location for division by pressing  2/
1  while the motion picture is paused.
4Press  4.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed wh ile processing the dividing.
MENU 
						

							10. Playing Back and Editing Images
238
This function allows you to create a motion picture from a picture group recorded with 
[Time Lapse Shot].
The created motion picture is saved in MP4 recording format.
1Select the menu.  (P53)
2Select the [Time Lapse Shot] picture group with  2/1 , and then press [MENU/
SET].
3Create a motion picture by selecting the methods for creating i t.
•The steps are the same as those for creating a motion picture f ollowing the recording of 
[Time Lapse Video] .
Refer to step 
5 onwards on  P173 for details.
Also refer to the notes on  P174 for created motion pictures.
A Motion picture is created from group pictures taken with [Sto p Motion Animation].
Created motion pictures are saved in MP4 recording format.
1Select the menu.  (P53)
2Select the Stop Motion Animation group with  2/1 , and then press [MENU/SET] .3Create a motion picture by selecting the methods for creating i t.
•The steps are the same as those for creating a motion picture f ollowing the recording of 
[Stop Motion Animation] .
Refer to step 
8 onwards on  P177 for details.
Also refer to the notes on  P178 for created motion pictures.
[Time Lapse Video]
> [Playback]  > [Time Lapse Video]
[Stop Motion Video]
>  [Playback]  > [Stop Motion Video]
MENU
MENU 
						

							239
10. Playing Back and Editing Images
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
1Select the menu.  (P53)
[Resize]
> [Playback]  > [Resize]  > [Single]/[Multi]
2Select the picture and size.
[Single] setting
1 Press  2/1  to select the picture, and then press 
[MENU/SET].
2 Press  3/4  to select the size, and then press [MENU/
SET].
•
Confirmation screen is displayed. It is executed when 
[Yes] is selected.
Exit the menu after it is executed.
[Multi] setting
1 Press  3/4  to select the size, and then press [MENU/
SET].
2 Press  3/4 /2/ 1 to select the picture, and then press 
[MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed 
again.
3 Press  2 to select [OK], and then press [MENU/SET] to 
execute.
•
Confirmation screen is displayed. It is executed when 
[Yes] is selected.
Exit the menu after it is executed.
MENU
161616
8844
6HW
L4:3
M4:3
S4:3
2. 
						

							10. Playing Back and Editing Images
240
•You can set up to 100 pictures at one time in [Multi].
•The picture quality of the resized picture will deteriorate.
Not available in these cases:
•
This function is not available in the following cases:–Motion pictures–Pictures taken in Panorama Shot Mode
–Group Pictures–Pictures stamped with [Text Stamp]–Pictures taken with [ ]