Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Gf7k Owners Manual For Advanced Features
Panasonic Digital Camera Dmc Gf7k Owners Manual For Advanced Features
Here you can view all the pages of manual Panasonic Digital Camera Dmc Gf7k Owners Manual For Advanced Features. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
141
5. Focus and Brightness (Exposure) Settings
Applicable modes:
When [š], [ ], [ Ø], or [ ] in Auto Focus Mode is selected, you can change the
position and size of the AF area.
•
Perform the operation after canceling the touch shutter functio n.
•When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to
[AF].
•The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P160) is set to [ ].
At the edge of the screen, the metering...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-140.png "Page 141
141
5. Focus and Brightness (Exposure) Settings
Applicable modes:
When [š], [ ], [ Ø], or [ ] in Auto Focus Mode is selected, you can change the
position and size of the AF area.
•
Perform the operation after canceling the touch shutter functio n.
•When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to
[AF].
•The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P160) is set to [ ].
At the edge of the screen, the metering...")
141 5. Focus and Brightness (Exposure) Settings Applicable modes: When [š], [ ], [ Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. • Perform the operation after canceling the touch shutter functio n. •When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to [AF]. •The spot metering target can also be moved to match the AF area when the [Metering Mode] (P160) is set to [ ]. At the edge of the screen, the metering...
Page 142
![Page 142
5. Focus and Brightness (Exposure) Settings
142
Position and size of the AF area can be changed.
1Press 2 ().2Select [ š] or [Ø ] and press 4.
•AF area setting screen is displayed.
•You can also display the AF area setting screen by
touching the screen.
3Change the position and size of the AF area.
•
If you set the AF area over an eye in the yellow frame when [š ] is selected, the eye to be
in focus will be changed. (P139)
4Press [MENU/SET] to set.
•AF area with the same function as [ Ø] is displayed...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-141.png "Page 142
5. Focus and Brightness (Exposure) Settings
142
Position and size of the AF area can be changed.
1Press 2 ().2Select [ š] or [Ø ] and press 4.
•AF area setting screen is displayed.
•You can also display the AF area setting screen by
touching the screen.
3Change the position and size of the AF area.
•
If you set the AF area over an eye in the yellow frame when [š ] is selected, the eye to be
in focus will be changed. (P139)
4Press [MENU/SET] to set.
•AF area with the same function as [ Ø] is displayed...")
5. Focus and Brightness (Exposure) Settings 142 Position and size of the AF area can be changed. 1Press 2 ().2Select [ š] or [Ø ] and press 4. •AF area setting screen is displayed. •You can also display the AF area setting screen by touching the screen. 3Change the position and size of the AF area. • If you set the AF area over an eye in the yellow frame when [š ] is selected, the eye to be in focus will be changed. (P139) 4Press [MENU/SET] to set. •AF area with the same function as [ Ø] is displayed...
Page 143
![Page 143
143
5. Focus and Brightness (Exposure) Settings
You can set the focus position precisely by enlarging the screen.
•The focus position cannot be set at the edge of the screen.
1Press 2 ().2Select [ ] and press 4.
3Press 3/4 /2 /1 to set the focus position and then
press [MENU/SET].
•
The assist screen for setting the focus position is displayed
in an enlarged size.
•The assist screen can also be displayed by touching the
subject.
4Move [+] to the position to be in focus.
•
When the picture is...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-142.png "Page 143
143
5. Focus and Brightness (Exposure) Settings
You can set the focus position precisely by enlarging the screen.
•The focus position cannot be set at the edge of the screen.
1Press 2 ().2Select [ ] and press 4.
3Press 3/4 /2 /1 to set the focus position and then
press [MENU/SET].
•
The assist screen for setting the focus position is displayed
in an enlarged size.
•The assist screen can also be displayed by touching the
subject.
4Move [+] to the position to be in focus.
•
When the picture is...")
143 5. Focus and Brightness (Exposure) Settings You can set the focus position precisely by enlarging the screen. •The focus position cannot be set at the edge of the screen. 1Press 2 ().2Select [ ] and press 4. 3Press 3/4 /2 /1 to set the focus position and then press [MENU/SET]. • The assist screen for setting the focus position is displayed in an enlarged size. •The assist screen can also be displayed by touching the subject. 4Move [+] to the position to be in focus. • When the picture is...
Page 144
![Page 144
5. Focus and Brightness (Exposure) Settings
144
Applicable modes:
By setting [Touch AF] (P49) in [Touch Settings] of the [Custom] menu to [AF+AE], you can
optimize the focus and brightness for the position you have tou ched.
1Select the menu. (P53)
2Press 3/4 to select [AF+AE], and press [MENU/SET].
3Touch the subject you want to optimize the
brightness for.
•AF area setting screen is displayed. (P142)•The brightness optimization position is displayed on the
center of the AF area. The position...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-143.png "Page 144
5. Focus and Brightness (Exposure) Settings
144
Applicable modes:
By setting [Touch AF] (P49) in [Touch Settings] of the [Custom] menu to [AF+AE], you can
optimize the focus and brightness for the position you have tou ched.
1Select the menu. (P53)
2Press 3/4 to select [AF+AE], and press [MENU/SET].
3Touch the subject you want to optimize the
brightness for.
•AF area setting screen is displayed. (P142)•The brightness optimization position is displayed on the
center of the AF area. The position...")
5. Focus and Brightness (Exposure) Settings 144 Applicable modes: By setting [Touch AF] (P49) in [Touch Settings] of the [Custom] menu to [AF+AE], you can optimize the focus and brightness for the position you have tou ched. 1Select the menu. (P53) 2Press 3/4 to select [AF+AE], and press [MENU/SET]. 3Touch the subject you want to optimize the brightness for. •AF area setting screen is displayed. (P142)•The brightness optimization position is displayed on the center of the AF area. The position...
Page 145
![Page 145
145
5. Focus and Brightness (Exposure) Settings
•When recording with the Touch Shutter, the focus and brightness are optimized for the touched
position before recording takes place.
•At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
•
[AF+AE], which optimizes the focus and brightness, does not wor k in the following cases.–In Manual Focus
–When using the Digital Zoom–When the AF area has been set by using the cursor...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-144.png "Page 145
145
5. Focus and Brightness (Exposure) Settings
•When recording with the Touch Shutter, the focus and brightness are optimized for the touched
position before recording takes place.
•At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
•
[AF+AE], which optimizes the focus and brightness, does not wor k in the following cases.–In Manual Focus
–When using the Digital Zoom–When the AF area has been set by using the cursor...")
145 5. Focus and Brightness (Exposure) Settings •When recording with the Touch Shutter, the focus and brightness are optimized for the touched position before recording takes place. •At the edge of the screen, the metering may be affected by the brightness around the touched location. Not available in these cases: • [AF+AE], which optimizes the focus and brightness, does not wor k in the following cases.–In Manual Focus –When using the Digital Zoom–When the AF area has been set by using the cursor...
Page 146
5. Focus and Brightness (Exposure) Settings 146 Turning on/not turning on the AF Assist Lamp AF assist lamp will illuminate the subject when the shutter but ton is pressed halfway, making it easier for the camera to focus when recording in low light conditions. (Larger AF area is displayed depending on the recording conditi ons.) • The effective range of the AF Assist Lamp is different dependin g on the lens used.–When the interchangeable lens (H-FS12032) is attached and at Wide: Approx. 1.0 m (3.3...
Page 147
![Page 147
147
5. Focus and Brightness (Exposure) Settings
Recording/not recording even when focus is not achieved
[FOCUS]:
You cannot take a picture until t he subject is brought into focus.
[RELEASE]:
This gives priority to the best time to take a picture so you c an take a picture when the
shutter button is pressed fully.
•
When set to [RELEASE], please be aware that focus may not be ac hieved even with focus
mode set to [AFS], [AFF] or [AFC].
Adjusting/not adjusting the focus manually after achieving Auto...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-146.png "Page 147
147
5. Focus and Brightness (Exposure) Settings
Recording/not recording even when focus is not achieved
[FOCUS]:
You cannot take a picture until t he subject is brought into focus.
[RELEASE]:
This gives priority to the best time to take a picture so you c an take a picture when the
shutter button is pressed fully.
•
When set to [RELEASE], please be aware that focus may not be ac hieved even with focus
mode set to [AFS], [AFF] or [AFC].
Adjusting/not adjusting the focus manually after achieving Auto...")
147 5. Focus and Brightness (Exposure) Settings Recording/not recording even when focus is not achieved [FOCUS]: You cannot take a picture until t he subject is brought into focus. [RELEASE]: This gives priority to the best time to take a picture so you c an take a picture when the shutter button is pressed fully. • When set to [RELEASE], please be aware that focus may not be ac hieved even with focus mode set to [AFS], [AFF] or [AFC]. Adjusting/not adjusting the focus manually after achieving Auto...
Page 148
![Page 148
5. Focus and Brightness (Exposure) Settings
148
Taking Pictures with Manual Focus
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate A uto Focus.
1Select the menu. (P53)
2Press 2 ().
3Press 3/ 4/2/1 to adjust the focus position,
and press [MENU/SET].
•The assist screen is displayed, enlarging the area. (MF
Assist)
The operations used to focus manually differ depending on the l ens.
When...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-147.png "Page 148
5. Focus and Brightness (Exposure) Settings
148
Taking Pictures with Manual Focus
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate A uto Focus.
1Select the menu. (P53)
2Press 2 ().
3Press 3/ 4/2/1 to adjust the focus position,
and press [MENU/SET].
•The assist screen is displayed, enlarging the area. (MF
Assist)
The operations used to focus manually differ depending on the l ens.
When...")
5. Focus and Brightness (Exposure) Settings 148 Taking Pictures with Manual Focus Applicable modes: Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate A uto Focus. 1Select the menu. (P53) 2Press 2 (). 3Press 3/ 4/2/1 to adjust the focus position, and press [MENU/SET]. •The assist screen is displayed, enlarging the area. (MF Assist) The operations used to focus manually differ depending on the l ens. When...
Page 149
![Page 149
149
5. Focus and Brightness (Exposure) Settings
•You can also enlarge the area by rotating the focus ring, moving the focus lever, or
pinching out (P48) the screen or touching the screen twice.
•You can also adjust the focus position by dragging (P48) the screen. •Pressing [DISP.] resets the focus position back to the center.
4Adjust the focus.
AIndicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
•The in-focus portions will be highlighted. (Peaking)•You can check whether the...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-148.png "Page 149
149
5. Focus and Brightness (Exposure) Settings
•You can also enlarge the area by rotating the focus ring, moving the focus lever, or
pinching out (P48) the screen or touching the screen twice.
•You can also adjust the focus position by dragging (P48) the screen. •Pressing [DISP.] resets the focus position back to the center.
4Adjust the focus.
AIndicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
•The in-focus portions will be highlighted. (Peaking)•You can check whether the...")
149 5. Focus and Brightness (Exposure) Settings •You can also enlarge the area by rotating the focus ring, moving the focus lever, or pinching out (P48) the screen or touching the screen twice. •You can also adjust the focus position by dragging (P48) the screen. •Pressing [DISP.] resets the focus position back to the center. 4Adjust the focus. AIndicator for ¶ (infinity) B MF Assist (enlarged screen) C Peaking D MF Guide •The in-focus portions will be highlighted. (Peaking)•You can check whether the...
Page 150
![Page 150
5. Focus and Brightness (Exposure) Settings
150
5Press the shutter button halfway.
•The assist screen will close. The recording screen will be displayed.
•You can also close the assist screen by pressing [MENU/SET].•If you have enlarged the picture by rotating the focus ring or moving the focus lever, the
assist screen will close approximately 10 seconds after the operation.
•MF Assist or MF guide may not display depending on the lens use d, but you can display MF
Assist by direct operation of the...](http://img.usermanuals.tech/thumb/58/64904/w300_dmc-gf7k_adv_en_om_d-149.png "Page 150
5. Focus and Brightness (Exposure) Settings
150
5Press the shutter button halfway.
•The assist screen will close. The recording screen will be displayed.
•You can also close the assist screen by pressing [MENU/SET].•If you have enlarged the picture by rotating the focus ring or moving the focus lever, the
assist screen will close approximately 10 seconds after the operation.
•MF Assist or MF guide may not display depending on the lens use d, but you can display MF
Assist by direct operation of the...")
5. Focus and Brightness (Exposure) Settings 150 5Press the shutter button halfway. •The assist screen will close. The recording screen will be displayed. •You can also close the assist screen by pressing [MENU/SET].•If you have enlarged the picture by rotating the focus ring or moving the focus lever, the assist screen will close approximately 10 seconds after the operation. •MF Assist or MF guide may not display depending on the lens use d, but you can display MF Assist by direct operation of the...