Panasonic Digital Camera Dmc Gf3 Owners Manual

							- 81 -
Recording
Recording Mode: 
Taking Pictures with the Self-timer
Press 4 ().
Touch self-timer icon ([ ], etc.).
Select and touch the time setting for the self 
timer.
Touch [SET].
Press the shutter button halfway to focus and 
then press it fully to take the picture.
A When self-timer is set to [ ].
•A picture is not taken until the subject is brought into focus. Focus and exposure will be set when the shutter button 
is pressed halfway.
•
If you want to press the shutter button fully to take a picture 
even when the subject is not focused, set [FOCUS PRIORITY] in the [CUSTOM] menu 
to [OFF].  (P139)
•The self-timer indicator  B blinks and the shutter is activated 
after 10 seconds (or 2 seconds).
•When [ ] is selected, the self-timer indicator blinks again 
after the first and the second pictures are taken and the 
shutter is activated 2 seconds after it blinks.
ItemSettings
10 seconds
After 10 seconds the camera takes 3 pictures at about 2 second intervals.
2 seconds
10
A 
						

							Recording
- 82 -
Note
•Time setting for the self timer can also be set by [SELF-TIMER] in the [REC] Mode menu.•Setting of the time setting for the self timer the [REC] Mode menu is not possible when 
Intelligent Auto (ñ or   ) Mode is set.•When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the 
jitter caused by pressing the shutter button.
•We recommend using a tripod when recording with the self-timer.•Depending on the recording conditions, the recording interval may become more than 
2 seconds when [ ] is selected.
•The flash output may vary slightly when the [ ] is selected.
•[ ] is disabled in Intelligent Auto (ñ or   ) Mode or when White Balance Bracket is set.•When [ ] is set in Intelligent Auto (ñ or  ) Mode, performing the following operations will 
reset the camera to [ ].
–Switching to other recording modes–Switching the power [ON]/[OFF]•The self-timer will be disabled during recording of the motion pictures. 
						

							- 83 -
Recording
Recording Mode: 
Taking Pictures with Auto Focus
This allows the focusing method that suits the positions and number of the subjects to be 
selected.
Also, it is possible to set the focus to the subject specified on the touch panel.
(Set the [TOUCH AF] of the [TOUCH SETTINGS] in the [CUSTOM] menu to [ON].)
Select the mode that matches the recording conditions and the composition.
Set the [FOCUS MODE] to [AFS] or [AFC] (P31).
Press  2 ().
To u c h  t h e  i t e m .
•AF area selection screen is displayed when  4 is pressed while 
[ š ], [ ], [ Ø], or [ ] is selected. For operation in the AF 
area selection screen, refer to  P87.
Touch [SET].
Note
•The [ š] is disabled in the following cases.–[FOOD], [NIGHT SCENERY] and [ILLUMINATIONS] in the Scene Mode.•The [ ] is disabled in the following cases.–[AFC] in the [FOCUS MODE].•The AF Mode is fixed to [ Ø] when using the Digital Zoom or [MINIATURE EFFECT] in 
Creative Control Mode.
•AF area will be fixed to a small point in [PERIPHERAL DEFOCUS] in Scene Mode. 
						

							Recording
- 84 -
The camera automatically detects the person’s face. The focus and 
exposure can then be adjusted to fit that face no matter what portion 
of the picture it is in. (max. 15 areas)
When the camera detects a person’s face, the AF area is displayed.
Yellow:
When the shutter button is pressed halfway, the frame turns green 
when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance 
away as faces within the yellow AF areas are also focused.
Note
•
Position and size of the AF area can be changed.  (P87)•When [š] is selected and [METERING MODE] is set to multiple [ C], the camera will adjust 
the exposure to suit the person’s face.  (P128)
•Under certain picture-taking conditions including the following cases, the face detection 
function may fail to work, making it impossible to detect faces. The AF Mode is switched to 
[].
–When the face is not facing the camera–When the face is at an angle–When the face is extremely bright or dark–When there is little contrast on the faces–When the facial features are hidden behind sunglasses, etc.–When the face appears small on the screen–When there is rapid movement–When the subject is other than a human being–When the camera is shaking
About [š] (Face Detection) 
						

							- 85 -
Recording
Focus and exposure can be adjusted to a specified subject. Focus and exposure will keep 
on following the subject even if it moves. (Dynamic tracking)
∫ When operating the touch panel
You can lock the subject by touching it.
•
Perform the operation after canceling the touch shutter function.•The AF area turns yellow while the subject is locked.•Lock is canceled when [ ] is touched.
∫ When operating buttons
Place the subject in the AF tracking frame, and press the shutter 
button halfway to lock the subject.
A AF tracking frame
•AF area will turn green when the camera detects the subject.•The AF area turns yellow when the shutter button is released.•Lock is canceled when [MENU/SET] is pressed.•Tracking AF and Face Dete ction will switch every time 2 is pressed in 
the Intelligent Auto (ñ or   ) Mode.
Note
•Exposure is adjusted in accordance with the locked subject when [METERING MODE] is set to 
[ C ]. (P128)
•If it fails to lock, AF area will flash  in red, and disappear. Try to lock again.•AF Tracking may be disabled in certain picture conditions such as when it is very dark. AF 
Mode will be switched to [Ø] in that case.
•In the following cases, [ ] operates as [ Ø]–When [PHOTO STYLE] is [MONOCHROME]–When Creative Control Mode is [SEPIA]•Dynamic Tracking function may not work in the following cases:–When the subject is too small–When the recording location is too dark or bright–When the subject is moving too fast–When the background has the same or similar color to the subject–When jitter is occurring–When zoom is operated
Setting up [ ] (AF Tracking)
A 
						

							Recording
- 86 -
Up to 23 points for each AF area can be focused. This is effective when the subject is not 
in the center of the screen.
(AF area frame will be same as image aspect ratio setting)
Note
•
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.  (P87)
The camera focuses on the subject in the AF area on the center of the screen.
Note
•
Position and size of the AF area can be changed.  (P87)•When the subject is not in the center of the composition in [ Ø], you can bring the subject into 
the AF area, fix the focus and exposure by pressing the shutter button halfway, move the 
camera to the composition you want with the shutter button pressed halfway, and then take the 
picture. (Only when the [FOCUS MODE] is set to [AFS].)
You can achieve a more  precise focus on a point that is smaller than [ Ø]. 
Note
•
The focus position can be set on an enlarged screen.  (P88)•Pressing the shutter button halfway displays the screen for checking the focus position 
enlarged to approximately 5 times original size.
•The size of the AF area displayed when the camera has achieved focus may change according 
to the subject.
•In the following cases, [ ] operates as [Ø]–When recording motion pictures
About [ ] (23-area-focusing)
About [ Ø] (1-area-focusing)
About [ ] (Pinpoint) 
						

							- 87 -
Recording
•Perform the operation after canceling the touch shutter function.
When selecting [š], [Ø ]
Position and size of the AF area can be changed.
1Touch the subject.
•AF area setting screen is displayed.•AF area setting screen can be displayed also by pressing 
2  and then  4.
•AF area can be moved also by the cursor button in the AF 
area setting screen.
•The AF area returns to the center when [ ] is 
pressed.
2Touch the slide bar to change the size 
of AF area frame.
•
It can be changed to 4 different sizes.•Enlarge/reduce can also be performed by rotating the 
control dial.
3Touch [SET].
•It is also possible to set by pressing [MENU/SET].•AF area with the same function as [ Ø] is displayed in the touched position, when the [ š] 
is selected. Setting of the AF area is cleared when [ ] is touched.
When selecting [ ]
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.
Touch the screen to display the AF area setting screen, 
and select the AF area frame as shown in the figure on 
the right.
•
After releasing your finger from the touch panel for a while, AF 
area frame will disappear, and only [ i] display (center point of 
selected AF area frame) will remain on the screen.
•AF area frame can be selected by the cursor button when the 
AF area setting screen is displayed by pressing  2 and then 4. 
AF area frame is set by pressing [MENU/SET].
•Setting of the AF area frame is canceled when [ ] is touched.
Setting up position of the AF area/changing size of the AF area 
						

							Recording
- 88 -
When selecting [ ]
You can set the focus position precisely by enlarging the screen.
•
The focus position cannot be set at the edge of the screen.
1Touch the subject.
•The assist screen for setting the focus position is enlarged to 
approximately 5 times original size.
•The assist screen can also be displayed by pressing 2, pressing 
4  to display the enlarged position setting screen, and then 
selecting the enlarged position using the cursor buttons and 
pressing [MENU/SET].
2Drag the screen to align the subject 
on the cross point of the crosshair in the center of the screen.
•
It is also possible to move the focus position with the cursor button.•Pressing [ ] will bring the focus position back to the center position.•On the assist screen, it is also possible to record a picture by touching [ ].
Note
•The spot metering target can also be moved to match the AF area when the 
[METERING MODE]  (P128) is set to [ Ù]. At the edge of the screen, the metering may be 
affected by the brightness around the AF area. 
						

							- 89 -
Recording
Recording Mode: 
Taking Pictures with Manual Focus
Use this function when you want to fix the focus or when the distance between the lens 
and the subject is determined and you do not want to activate Auto Focus.
Set the [FOCUS MODE] in [REC] Mode menu to [MF].  (P57)
Rotate the focus ring on the lens to focus on the subject.
•When [MF ASSIST] in the [CUSTOM] menu is set to [ON], 
turning the focus ring switches to the assist screen and 
enlarges the display. (MF Assist  A)
•MF guide B is displayed on the screen when the focus ring is 
rotated if the [MF GUIDE] in the [CUSTOM] menu is set to 
[ON]. You can check the direction of rotation of the focus ring is 
toward the near side or the far side.
A
B 
						

							Recording
- 90 -
∫Displaying the MF Assist
•This is displayed by rotating the focus ring or touching the screen. (In [MINIATURE EFFECT] in 
Creative Control Mode, you cannot display by touching the screen)
•It can also be displayed by pressing  2 to display the setup screen for the enlarged area, 
deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].
∫ Changing the display of the MF Assist
You can switch the magnification factor between approx. 4 times, 5 times and 10 times. In 
the case of 4 times magnification, the central region is magnified. In the case of 5 and 10 
times magnification, the whole screen is magnified.
•
You can change the magnification by touching [ ]/[ ] or rotating the control dial.
∫ Moving the enlarged area
•The enlarged area can be moved by dragging the screen  (P10), or pressing the cursor button.•The following will return the MF assi stance to the original position.–When the [FOCUS MODE] is set to other than [MF]–Changing [ASPECT RATIO] or [PICTURE SIZE]–Turning the camera off–When [ ] is pressed in the setup screen for the enlarged area
∫Closing the MF Assist
•It will close when the shutter button is pressed halfway.•It will also close by touching the [EXIT] on the screen or pressing [MENU/SET].•When displayed by rotating the focus ring, it is closed approximately 10 seconds after the 
operation is stopped.
Note
•The MF Assist is disabled when using the  Digital Zoom or recording motion pictures.•MF Assist or MF guide may not display depending on the lens used, but you can display MF 
Assist by direct operation of the camera, using the touch panel or a button.
MF ASSIST