Panasonic Digital Camera Dmc Gf3 Owners Manual
Here you can view all the pages of manual Panasonic Digital Camera Dmc Gf3 Owners Manual . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
- 71 -
Recording
Recording Mode:
Taking Pictures with the Zoom
[You can only use the Optical Zoom in [ ], [ ] and the Optical Zoom, the Extended Tele
Conversion in [¿] mode.]
∫ Optical Zoom
You can zoom-out to record landscapes etc. in wide angle (Wide) or zoom-in to make
people and objects appear closer (Tel e) by rotating the zoom ring.
•
The interchangeable lens (H-H014) does not support the zoom ring function.
∫ Extended Tele Conversion (EX)
To enlarge further, set the [EX. TELE CONV.] in the...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-70.png "Page 71
- 71 -
Recording
Recording Mode:
Taking Pictures with the Zoom
[You can only use the Optical Zoom in [ ], [ ] and the Optical Zoom, the Extended Tele
Conversion in [¿] mode.]
∫ Optical Zoom
You can zoom-out to record landscapes etc. in wide angle (Wide) or zoom-in to make
people and objects appear closer (Tel e) by rotating the zoom ring.
•
The interchangeable lens (H-H014) does not support the zoom ring function.
∫ Extended Tele Conversion (EX)
To enlarge further, set the [EX. TELE CONV.] in the...")
- 71 - Recording Recording Mode: Taking Pictures with the Zoom [You can only use the Optical Zoom in [ ], [ ] and the Optical Zoom, the Extended Tele Conversion in [¿] mode.] ∫ Optical Zoom You can zoom-out to record landscapes etc. in wide angle (Wide) or zoom-in to make people and objects appear closer (Tel e) by rotating the zoom ring. • The interchangeable lens (H-H014) does not support the zoom ring function. ∫ Extended Tele Conversion (EX) To enlarge further, set the [EX. TELE CONV.] in the...
Page 72
![Page 72
Recording
- 72 -
Recording Mode:
Taking Pictures using the Flash
Note
•Be careful when opening the flash as the flash will jump out.•Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the flash to match the recording.
•Open the flash.
1Select [FLASH] in the [REC] Mode menu. (P57)2Press 3/4 to select a mode and press [MENU/SET].
•Exit the menu after it is set.
A
To open the flash
B To close the flash
Press the flash until it clicks.
•Be sure to close the flash when not...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-71.png "Page 72
Recording
- 72 -
Recording Mode:
Taking Pictures using the Flash
Note
•Be careful when opening the flash as the flash will jump out.•Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the flash to match the recording.
•Open the flash.
1Select [FLASH] in the [REC] Mode menu. (P57)2Press 3/4 to select a mode and press [MENU/SET].
•Exit the menu after it is set.
A
To open the flash
B To close the flash
Press the flash until it clicks.
•Be sure to close the flash when not...")
Recording - 72 - Recording Mode: Taking Pictures using the Flash Note •Be careful when opening the flash as the flash will jump out.•Be careful not to catch a finger when closing a flash bulb. Applicable modes: Set the flash to match the recording. •Open the flash. 1Select [FLASH] in the [REC] Mode menu. (P57)2Press 3/4 to select a mode and press [MENU/SET]. •Exit the menu after it is set. A To open the flash B To close the flash Press the flash until it clicks. •Be sure to close the flash when not...
Page 73
![Page 73
- 73 -
Recording
The flash is activated twice. The interval between the first and second flash is
longer when [ ], [ ] or [ ] is set. The subject should not move until the
second flash is activated.
ItemDescription of settings
‡ : AUTO The flash is automatically activated when the recording conditions make
it necessary.
:
AUTO/Red-Eye
Reduction The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-72.png "Page 73
- 73 -
Recording
The flash is activated twice. The interval between the first and second flash is
longer when [ ], [ ] or [ ] is set. The subject should not move until the
second flash is activated.
ItemDescription of settings
‡ : AUTO The flash is automatically activated when the recording conditions make
it necessary.
:
AUTO/Red-Eye
Reduction The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye...")
- 73 - Recording The flash is activated twice. The interval between the first and second flash is longer when [ ], [ ] or [ ] is set. The subject should not move until the second flash is activated. ItemDescription of settings ‡ : AUTO The flash is automatically activated when the recording conditions make it necessary. : AUTO/Red-Eye Reduction The flash is automatically activated when the recording conditions make it necessary. It is activated once before the actual recording to reduce the red-eye...
Page 74
![Page 74
Recording
- 74 -
∫Available flash settings by Recording Mode
The available flash settings depend on the Recording Mode.
(± : Available, —: Not available, ¥: Initial setting of Scene Mode)
¢ [ ] is displayed.•The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
•The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash
setting is reset to the initial setting when the Scene Mode is changed.
•Flash will not be...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-73.png "Page 74
Recording
- 74 -
∫Available flash settings by Recording Mode
The available flash settings depend on the Recording Mode.
(± : Available, —: Not available, ¥: Initial setting of Scene Mode)
¢ [ ] is displayed.•The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
•The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash
setting is reset to the initial setting when the Scene Mode is changed.
•Flash will not be...")
Recording - 74 - ∫Available flash settings by Recording Mode The available flash settings depend on the Recording Mode. (± : Available, —: Not available, ¥: Initial setting of Scene Mode) ¢ [ ] is displayed.•The flash setting may change if the Recording Mode is changed. Set the flash setting again if necessary. •The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed. •Flash will not be...
Page 75
- 75 - Recording ∫Shutter speed for each flash setting ¢1 This becomes 60 seconds in Shutter-Priority AE Mode. ¢ 2This becomes 60 seconds in Shutter-Priority AE Mode and 60 seconds in the Manual Exposure Mode. •When the flash is activated the fastest shutter speed that can be selected is 1/160 of a second.•In Intelligent Auto (ñ or ) Mode, shutter speed changes depending on the identified scene. Note •Do not bring the flash too close to objects or close the flash while it is activated. The objects...
Page 76
Recording - 76 - Recording Mode: Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Note • The set exposure value is memorized even if the camera is turned off.•The compensation range of the exposure will be limited depending on the brightness of the subject. •When numerical values for aperture and shutter speed are displayed in Program AE Mode, each press...
Page 77
![Page 77
- 77 -
Recording
Recording Mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Press 4 () .
Touch burst icon ([ ], etc.).
Select and touch the burst speed.
¢ 1 Number of recordable pictures
¢ 2 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
•The...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-76.png "Page 77
- 77 -
Recording
Recording Mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Press 4 () .
Touch burst icon ([ ], etc.).
Select and touch the burst speed.
¢ 1 Number of recordable pictures
¢ 2 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
•The...")
- 77 - Recording Recording Mode: Taking Pictures using Burst Mode Pictures are taken continuously while the shutter button is pressed. Press 4 () . Touch burst icon ([ ], etc.). Select and touch the burst speed. ¢ 1 Number of recordable pictures ¢ 2 Pictures can be taken until the capacity of the card becomes full. However the burst speed will become slower halfway. The exact timing of this depends on the aspect ratio, the picture size, the setting for the quality and the type of card used. •The...
Page 78
![Page 78
Recording
- 78 -
Touch [SET].
Focus on the subject and take a picture.
AWhen Burst Mode is set to high speed [H].
•Hold down the shutter button fully to activate the Burst Mode.
∫Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY] (P139) in the
[CUSTOM] menu and the setting for [FOCUS MODE] (P31) in [REC] Mode menu.
¢ 1 When subject is dark, the focus is fixed on the first picture.
¢ 2 The burst speed may become slower because the camera is continuously focusing on...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-77.png "Page 78
Recording
- 78 -
Touch [SET].
Focus on the subject and take a picture.
AWhen Burst Mode is set to high speed [H].
•Hold down the shutter button fully to activate the Burst Mode.
∫Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY] (P139) in the
[CUSTOM] menu and the setting for [FOCUS MODE] (P31) in [REC] Mode menu.
¢ 1 When subject is dark, the focus is fixed on the first picture.
¢ 2 The burst speed may become slower because the camera is continuously focusing on...")
Recording - 78 - Touch [SET]. Focus on the subject and take a picture. AWhen Burst Mode is set to high speed [H]. •Hold down the shutter button fully to activate the Burst Mode. ∫Focusing in Burst Mode The focus changes depending on the setting for [FOCUS PRIORITY] (P139) in the [CUSTOM] menu and the setting for [FOCUS MODE] (P31) in [REC] Mode menu. ¢ 1 When subject is dark, the focus is fixed on the first picture. ¢ 2 The burst speed may become slower because the camera is continuously focusing on...
Page 79
![Page 79
- 79 -
Recording
Recording Mode:
Taking Pictures using Auto Bracket
Maximum of 5 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
With Auto Bracket
[STEP]: [3 •1/3], [SEQUENCE]: [0/ s/r ]
Press 4 () .
Touch Auto Bracket icon ([ ], etc.).
Select and touch the step.
Touch [SET].
Focus on the subject and take a picture.
A Auto Bracket indication
•If you press and hold the shutter button, the number of pictures...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-78.png "Page 79
- 79 -
Recording
Recording Mode:
Taking Pictures using Auto Bracket
Maximum of 5 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
With Auto Bracket
[STEP]: [3 •1/3], [SEQUENCE]: [0/ s/r ]
Press 4 () .
Touch Auto Bracket icon ([ ], etc.).
Select and touch the step.
Touch [SET].
Focus on the subject and take a picture.
A Auto Bracket indication
•If you press and hold the shutter button, the number of pictures...")
- 79 - Recording Recording Mode: Taking Pictures using Auto Bracket Maximum of 5 pictures will be recorded with different exposure settings following the Exposure Compensation range every time the shutter button is pressed. With Auto Bracket [STEP]: [3 •1/3], [SEQUENCE]: [0/ s/r ] Press 4 () . Touch Auto Bracket icon ([ ], etc.). Select and touch the step. Touch [SET]. Focus on the subject and take a picture. A Auto Bracket indication •If you press and hold the shutter button, the number of pictures...
Page 80
![Page 80
Recording
- 80 -
∫Changing the settings for [ / SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
1Select [AUTO BRACKET] in the [REC] Mode menu. (P57)2Press 3/4 to select [ / SETTINGS], [STEP] or
[SEQUENCE] and then press [MENU/SET].
3Press 3/4 to select the setting and then press [MENU/SET].
•
You can take one picture at a time when set to [ ].•You can continuously take pictures up to set numbers when set to [ ].•Exit the menu after it is set.
Note
•When taking pictures using Auto Bracket after...](http://img.usermanuals.tech/thumb/58/64991/w300_dmc-gf3_adv_en_om_d-79.png "Page 80
Recording
- 80 -
∫Changing the settings for [ / SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
1Select [AUTO BRACKET] in the [REC] Mode menu. (P57)2Press 3/4 to select [ / SETTINGS], [STEP] or
[SEQUENCE] and then press [MENU/SET].
3Press 3/4 to select the setting and then press [MENU/SET].
•
You can take one picture at a time when set to [ ].•You can continuously take pictures up to set numbers when set to [ ].•Exit the menu after it is set.
Note
•When taking pictures using Auto Bracket after...")
Recording - 80 - ∫Changing the settings for [ / SETTINGS], [STEP] and [SEQUENCE] in Auto Bracket 1Select [AUTO BRACKET] in the [REC] Mode menu. (P57)2Press 3/4 to select [ / SETTINGS], [STEP] or [SEQUENCE] and then press [MENU/SET]. 3Press 3/4 to select the setting and then press [MENU/SET]. • You can take one picture at a time when set to [ ].•You can continuously take pictures up to set numbers when set to [ ].•Exit the menu after it is set. Note •When taking pictures using Auto Bracket after...