Panasonic Digital Camera Dmc Gf1c Gf1k Gf1 Operating Instructions

							131VQT2G44
Advanced (Playback)
When [CATEGORY SELECTION] has been selected in step 2
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4 /2 /1 .
The menu screen is restored when [ ‚] is pressed.
When [ALL], [PICTURE ONLY], [MOTION PIC. ONLY] or 
[FAVORITE] has been selected in step 2
Press  3 to select [START] and then press 
[MENU/SET].
Press  4 to finish the slide show.
Normal playback resumes after the slide show finishes.
Press  3/4/2/1 to select the category to play back 
and then press [MENU/SET] to set.
 For details on categories, refer to P133.
Press  3 to select [START] and then press [MENU/
SET].
Press  4 to finish the slide show.
Normal playback resumes after the slide show finishes.
A Play/Pause
B St o p
C Back to previous picture
¢
DAhead to next picture¢
¢ These operations can be performed only in the Pause Mode or 
during motion picture playback.
E Reduce volume level
F Increase volume level
DMC-GF1KPP-VQT2G44_eng.book  131 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							VQT2G44132
Advanced (Playback)
∫Changing the slide show settings
You can change the settings for slide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from 
one picture to the next.
[NATURAL], [SWING], [URBAN], [OFF]
 When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
 [EFFECT] is set to [OFF] when playing a slide show with motion pictures only.
[SETUP]
[DURATION] or [REPEAT] can be set.
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
 [AUDIO] can be set only when [OFF] has been selected as the [MUSIC] setting. Audio will be 
played along with the still picture with audio or audio of the motion picture by setting the 
[AUDIO] to [ON].
NoteMusic effects cannot be played back simultaneously with motion pictures or still pictures with 
audio.
 It is not possible to add new music effects.
Playback in [NORMAL PLAY], [PICTURE PLAY], [AVCHD Lite PLAY], 
[MOTION JPEG PLAY],  [CATEGORY PLAY] or [FAVORITE PLAY] can be selected.
Select [PLAYBACK MODE] on the [PLAYBACK] mode menu. (P28)
Press 3/ 4 to select the item and then press 
[MENU/SET].
 [FAVORITE PLAY] can be selected only when [FAVORITE] on 
the [PLAYBACK] menu (P134) is at [ON] and there are pictures 
already set as favorites.
 Refer to P50 for information about how to play back pictures in 
[NORMAL PLAY], [PICTURE PLAY], [AVCHD Lite PLAY], [MOTION JPEG PLAY] or 
[FAVORITE PLAY] can be selected.
ItemSettings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] ON/OFF
[MUSIC] ON/OFF
[AUDIO] ON/OFF
  [PLAYBACK MODE]
DMC-GF1KPP-VQT2G44_eng.book  132 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							133VQT2G44
Advanced (Playback)
When [CATEGORY PLAY] is selected in step 2
Press  3/4/ 2/1 to select the category and then 
press [MENU/SET] to set.
 If a picture is found in a category, the category icon turns blue.
 It may take time to search the picture files if there are a lot on 
the card.
 If you press [ ‚] while searching, the searching will stop 
halfway.
 Pictures are sorted into the categories shown below.
¢   Press  3/4/ 2/1 to select the person to playback and then press [MENU/SET].
Face Recognition may not be possible or may not recognize faces correctly even for 
registered faces, depending on the facial expression and environment.
Also, if there are multiple faces that are already registered in the picture, it will be 
categorized only once to the person found first in the registration.
[CATEGORY]Recording information  e.g. Scene Modes[CATEGORY]Recording information e.g. Scene Modes
[FACE RECOG.]
¢Î[BABY1]/[BABY2], 
[i-BABY]
*
[PORTRAIT], 
[i-PORTRAIT],
[SOFT SKIN], 
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[BABY1]/[BABY2], 
[i-BABY]
í[PET]
,[SCENERY], 
[i-SCENERY], 
[ARCHITECTURE], 
[SUNSET]
1[FOOD]
.
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT],
[NIGHT SCENERY], 
[i-NIGHT SCENERY], 
[ILLUMINATIONS] [TRAVEL DATE]
[SPORTS], [PARTY]
Í[AVCHD Lite], 
[MOTION JPEG]
DMC-GF1KPP-VQT2G44_eng.book  133 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							VQT2G44134
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
 Play back the pictures set as favorites only as a slide show.
 Play back only the pictures set as favorites. ([FAVORITE PLAY])
 Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] mode menu. (P28)
∫Canceling all the [FAVORITE] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.You cannot select [CANCEL] if not even one picture has been set as a favorite.
 [CANCEL] cannot be selected when in [PLAYBACK MODE].
NoteYou can set up to 999 pictures as favorites.
 When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P54) is useful so 
only the pictures you want to be printed remain on the card.
 You may not be able to set pictures taken with other equipment as favorites.
 The motion pictures recorded in [AVCHD Lite] and pictures that were taken with the [QUALITY] 
set to [ ] cannot be set to [FAVORITE].
Ü  [FAVORITE]
Press 4 to select [ON] and then press 
[MENU/SET].
 You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press 2/ 1 to select the picture and then press 4  
to set it during playback.
 Repeat the above procedure.
 If  4 is pressed again, the favorite setting is canceled.
DMC-GF1KPP-VQT2G44_eng.book  134 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							135VQT2G44
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P136). (Only alphabetic characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in Travel Date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P28)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/ 2/1 to select text and then press 
[MENU/SET] to register.
 Press [DISPLAY] to switch text between [A] (capitals), [a] 
(small case) and [&/1] (special characters and numbers).
 The entry position cursor can be moved left and right with the 
rear dial.
 To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
 To stop editing at any time during text entry, press [ ‚].
 A maximum of 30 characters can be entered. (Maximum of 9 characters when setting 
names in [FACE RECOG.])
Press  3/4/ 2/1 to move the cursor to [EXIT] and then press 
[MENU/SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.
 Press [MENU/SET] to close the menu.
 [TITLE EDIT]
Select the picture, and then 
press [MENU/SET] to set.
 [’ ] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1  to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
 The setting is canceled when [DISPLAY] is pressed again.
DMC-GF1KPP-VQT2G44_eng.book  135 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							VQT2G44136
Advanced (Playback)
∫Delete the title
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].2Press [ ‚].
3Press [MENU/SET] to close the menu.
[MULTI] setting
1Select [EXIT] without entering text in step 4, and then press [MENU/SET].
2Press [MENU/SET] to close the menu.
Note
 Text can be scrolled if all of the registered text does not fit on the screen.
 The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene Mode or 
[LOCATION] in Travel Date can also be registered by using the operation in steps 
4 and 
following.
 The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in Travel Date 
and [TITLE EDIT] cannot be registered at the same time.
 You can print out texts (comments) using the “PHOTOfunSTUDIO 4.0 HD Edition” bundled 
software on the CD-ROM (supplied).
 You can set up to 50 pictures at one time with [MULTI].
 You cannot use title edit for the following pictures.
– Motion pictures
– Protected pictures
– Pictures taken with [ ], [ ] or [ ]
– Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P28)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
  [TEXT STAMP]
Select the picture, and then 
press [MENU/SET] to set.
 [‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and 
then press [MENU/SET] to set.
 The setting is canceled when 
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4/ 2/1 to 
select the pictures.
DMC-GF1KPP-VQT2G44_eng.book  136 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							137VQT2G44
Advanced (Playback)
Press 3/4/ 2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P91)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for  pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in Scene 
Mode, [LOCATION] in Travel Date or [TITLE EDIT].
Press [MENU/SET].
 If you set [TEXT STAMP] for a picture with a picture size larger than [S], the picture size 
will become smaller as shown below.
 The picture becomes slightly rougher.
Press  3 to select [YES] and then press 
[MENU/SET].
 The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [S].
Press [ ‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.
 Press [MENU/SET] to close the menu.
NoteWhen you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
 You can set up to 50 pictures at one time in [MULTI].
 Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
 Text and dates cannot be stamped on the pictures in the following cases.
– Motion pictures
– Pictures with audio
– Pictures recorded without setting the clock and title
– Pictures that were previously stamped with [TEXT STAMP]
– Pictures taken with [ ], [ ] or [ ]
– Pictures recorded with other equipment
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes.
Aspect ratio settingPicture size
X
/ > 
Y/ > 
W/ > 
/ > 
DMC-GF1KPP-VQT2G44_eng.book  137 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							VQT2G44138
Advanced (Playback)
We recommend resizing to [S] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu. (P28)
Press 3 to select [YES] and then press 
[MENU/SET].
Press [‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
 Press [MENU/SET] to close the menu.
NoteYou can set up to 50 pictures at one time in [MULTI].
 The picture quality of the resized picture will deteriorate.
 It may not be possible to resize pictures recorded with other equipment.
 Motion pictures, pictures with audio, pictures  stamped with [TEXT STAMP] and pictures taken 
with [ ], [ ] or [ ] cannot be resized.
Q  [RESIZE] Reducing the picture size (number of pixels)
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting1Press  2/1 to select the picture, and 
then press [MENU/SET].
2Press  2/1 to select the size¢, and 
then press [MENU/SET].
¢ Only the sizes to which the pictures can be 
resized is displayed.
[SINGLE]
[MULTI] setting
1Press  3/4  to select the size, and then 
press [MENU/SET].
2Press  3/4/ 2/1 to select the picture, 
and then press [DISPLAY].
 Repeat this step for each picture, and 
press [MENU/SET] to set.
[MULTI]
DMC-GF1KPP-VQT2G44_eng.book  138 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							139VQT2G44
Advanced (Playback)
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu. (P28)
Press [MENU/SET].
Press 3 to select [YES] and then press 
[MENU/SET].
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
NoteDepending on the cut size, the picture size of the trimmed picture may become smaller than 
that of the original picture.
 The picture quality of the trimmed picture will deteriorate.
 It may not be possible to trim pictures recorded with other equipment.
 Motion pictures, pictures with audio, pictures stamped with [TEXT STAMP] and pictures taken 
with [ ], [ ] or [ ] cannot be trimmed.
 Information regarding the face recognition in the original picture will not be copied to images 
having undergone [TRIMMING].
 [TRIMMING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the rear dial and press 
3/ 4/ 2/1 to select the parts 
to be trimmed.
Rear dial (right): 
Enlargement
Rear dial (left): Reduction
3/ 4/2 /1 : Move Reduction Enlargement
()
Move the position
()
DMC-GF1KPP-VQT2G44_eng.book  139 ページ  ２００９年８月１７日　月曜日　午後１時１９分 
						

							VQT2G44140
Advanced (Playback)
You can convert pictures taken with a [W] aspect ratio to a [ Y], a [ X] or a [ ] aspect 
ratio.
Select [ASPECT CONV.] on the [PLAYBACK] mode menu. (P28)
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
NoteAfter converting the aspect ratio, the picture size may become larger than that of the original 
picture.
 You may not be able to convert pictures taken on other equipment.
 The [ASPECT CONV.] cannot be performed on the motion pictures, pictures with audio, 
pictures stamped with [TEXT STAMP] and pictures taken with [ ], [ ] or [ ].
 Information regarding the face recognition in the original picture will not be copied to images 
having undergone [ASPECT CONV.].
?  [ASPECT CONV.]
Press 3/ 4 to select [ Y], [X ] or [ ] and then 
press [MENU/SET].
Press 2/ 1 to select a picture taken with [ W] 
aspect ratio, and then press [MENU/SET].
Press 2/ 1 to determine the horizontal position, 
and press [MENU/SET] to set.
 Use  3/4 to set the frame position for pictures rotated vertically.
Press 3 to select [YES] and then press 
[MENU/SET].
DMC-GF1KPP-VQT2G44_eng.book  140 ページ  ２００９年８月１７日　月曜日　午後１時１９分